
----------------------------------------------
trial-2383 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
23:18:38.801125 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:38.812336 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
23:18:38.951133 tst         cs_paging_gprs_active.py: using LAC 32194
23:18:39.073274 tst         cs_paging_gprs_active.py: using RAC 64
23:18:39.195366 tst         cs_paging_gprs_active.py: using CellId 32194
23:18:39.318173 tst         cs_paging_gprs_active.py: using BVCI 32195
23:18:39.341570 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.352791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.363791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.375198 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.386580 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.397868 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.409300 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.420597 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:18:39.432185 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:18:39.552505 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:18:39.831642 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
23:18:39.962499 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:18:40.299121 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7480): Launched
23:18:40.579269 run iperf3-srv_10.42.42.10(pid=7481): Launched
23:18:40.778754 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
23:18:40.914539 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:18:41.249922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7482): Launched
23:18:41.529682 run iperf3-srv_10.42.42.10(pid=7483): Launched
23:18:41.728660 tst      cs_paging_gprs_active.py:38: start network...
23:18:41.864456 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:18:42.386412 run          create_hlr_db(pid=7484): Launched
23:18:42.574944 bus                          /gobi_6: Setting Powered False
23:18:43.596299 run          create_hlr_db(pid=7484): Terminated: ok {rc=0}
23:18:44.005934 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7486): Launched
23:18:44.314075 run    osmo-hlr_10.42.42.2(pid=7487): Launched
23:18:44.428798 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:18:44.960296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7489): Launched
23:18:45.265982 run    osmo-stp_10.42.42.5(pid=7490): Launched
23:18:45.378032 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:18:45.936591 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7492): Launched
23:18:46.069202 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:18:46.375295 run               patchelf(pid=7493): Launched
23:18:46.571701 run    osmo-stp_10.42.42.5(pid=7490): ERR: Terminated: ERROR {rc=1}  [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7490)]
23:18:46.715219 run    osmo-stp_10.42.42.5(pid=7490): stdout: 
| (launched: 2022-12-12_23:18:45.115089)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:18:46.859122 run    osmo-stp_10.42.42.5(pid=7490): stderr: 
| [0;m[38;5;43m20221212231845286 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212231845287 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212231845287 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212231845287 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231845288 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231845288 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231845288 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:18:47.000235 run    osmo-stp_10.42.42.5(pid=7490): stdout: 
| (launched: 2022-12-12_23:18:45.115089)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:18:47.136429 run    osmo-stp_10.42.42.5(pid=7490): stderr: 
| [0;m[38;5;43m20221212231845286 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221212231845287 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221212231845287 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221212231845287 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212231845288 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212231845288 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212231845288 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:18:47.294243 run               patchelf(pid=7493): Terminating (SIGINT)
23:18:47.478629 run               patchelf(pid=7493): Terminated: ok {rc=0}
23:18:47.512446 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7490): Process ended prematurely: osmo-stp_10.42.42.5(pid=7490) [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7490)]  [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
23:18:47.522679 tst      cs_paging_gprs_active.py:38: Test FAILED (8.8 sec)
23:18:47.585263 run    osmo-hlr_10.42.42.2(pid=7487): ERR: Terminated: ERROR {rc=237}  [trial-2383↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7487)]
23:18:47.636427 run    osmo-hlr_10.42.42.2(pid=7487): stdout: 
| (launched: 2022-12-12_23:18:44.161818) 
23:18:47.688010 run    osmo-hlr_10.42.42.2(pid=7487): stderr: 
| [0;m[1;31m20221212231844339 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221212231844339 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221212231844339 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221212231844339 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221212231844339 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221212231844339 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221212231844351 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221212231844362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212231844362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212231844362 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:18:47.731860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7480): Terminating (SIGTERM)
23:18:47.773401 run iperf3-srv_10.42.42.10(pid=7481): Terminating (SIGTERM)
23:18:47.814804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7482): Terminating (SIGTERM)
23:18:47.856276 run iperf3-srv_10.42.42.10(pid=7483): Terminating (SIGTERM)
23:18:47.897837 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7486): Terminating (SIGTERM)
23:18:47.939287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7489): Terminating (SIGTERM)
23:18:47.980754 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7492): Terminating (SIGTERM)
23:18:47.990352 ---      ParallelTerminationStrategy: PID 7480 died...
23:18:48.045919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7480): Terminated: ok {rc=0}
23:18:48.055887 ---      ParallelTerminationStrategy: PID 7481 died...
23:18:48.110823 run iperf3-srv_10.42.42.10(pid=7481): Terminated {rc=256}
23:18:48.120740 ---      ParallelTerminationStrategy: PID 7482 died...
23:18:48.176114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7482): Terminated: ok {rc=0}
23:18:48.185978 ---      ParallelTerminationStrategy: PID 7483 died...
23:18:48.240740 run iperf3-srv_10.42.42.10(pid=7483): Terminated {rc=256}
23:18:48.250640 ---      ParallelTerminationStrategy: PID 7486 died...
23:18:48.305417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7486): Terminated: ok {rc=0}
23:18:48.315376 ---      ParallelTerminationStrategy: PID 7489 died...
23:18:48.370409 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7489): Terminated: ok {rc=0}
23:18:48.380215 ---      ParallelTerminationStrategy: PID 7492 died...
23:18:48.435933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7492): Terminated: ok {rc=0}
23:18:48.522443 bus                          /gobi_0: Setting Powered False
23:18:49.629218 bus                          /gobi_0: Setting Powered False
23:18:50.740979 bus                          /gobi_6: Setting Powered False
