
----------------------------------------------
trial-2384 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py
----------------------------------------------
01:14:59.193430 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.205195 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:14:59.339846 tst                        iperf3.py: using LAC 32613
01:14:59.463701 tst                        iperf3.py: using RAC 228
01:14:59.587411 tst                        iperf3.py: using CellId 32613
01:14:59.719307 tst                        iperf3.py: using BVCI 32614
01:14:59.744871 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.757091 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.769348 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.782293 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.793407 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.804055 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.815110 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.825989 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:14:59.836912 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:15:00.137701 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:15:00.277408 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:15:00.623699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16176): Launched
01:15:00.936935 run iperf3-srv_10.42.42.10(pid=16177): Launched
01:15:01.146137 tst                      iperf3.py:8: start network...
01:15:01.288866 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:15:01.923918 run         create_hlr_db(pid=16181): Launched
01:15:02.164931 bus                          /gobi_6: Setting Powered False
01:15:03.144174 run         create_hlr_db(pid=16181): Terminated: ok {rc=0}
01:15:03.627125 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16183): Launched
01:15:03.962600 run   osmo-hlr_10.42.42.2(pid=16184): Launched
01:15:04.083066 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:15:04.668717 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16186): Launched
01:15:05.003773 run   osmo-stp_10.42.42.5(pid=16187): Launched
01:15:05.125577 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:15:05.710471 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16189): Launched
01:15:05.830386 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:15:06.124280 run              patchelf(pid=16190): Launched
01:15:06.319467 run   osmo-stp_10.42.42.5(pid=16187): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16187)]
01:15:06.462022 run   osmo-stp_10.42.42.5(pid=16187): stdout: 
| (launched: 2022-12-13_01:15:04.838483)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:15:06.604511 run   osmo-stp_10.42.42.5(pid=16187): stderr: 
| [0;m[38;5;43m20221213011505033 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213011505033 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213011505033 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213011505034 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213011505034 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213011505034 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213011505034 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:15:06.742288 run   osmo-stp_10.42.42.5(pid=16187): stdout: 
| (launched: 2022-12-13_01:15:04.838483)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:15:06.879167 run   osmo-stp_10.42.42.5(pid=16187): stderr: 
| [0;m[38;5;43m20221213011505033 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213011505033 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213011505033 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213011505034 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213011505034 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213011505034 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213011505034 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:15:07.039051 run              patchelf(pid=16190): Terminating (SIGINT)
01:15:07.226268 run              patchelf(pid=16190): Terminated: ok {rc=0}
01:15:07.260277 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16187): Process ended prematurely: osmo-stp_10.42.42.5(pid=16187) [trial-2384↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16187)]  [trial-2384↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8]
01:15:07.270286 tst                      iperf3.py:8: Test FAILED (8.1 sec)
01:15:07.335238 run   osmo-hlr_10.42.42.2(pid=16184): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16184)]
01:15:07.387958 run   osmo-hlr_10.42.42.2(pid=16184): stdout: 
| (launched: 2022-12-13_01:15:03.796908) 
01:15:07.441286 run   osmo-hlr_10.42.42.2(pid=16184): stderr: 
| [0;m[1;31m20221213011503998 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213011503998 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213011503998 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213011503998 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213011503998 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213011503998 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213011504010 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213011504019 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213011504019 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213011504019 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:15:07.486467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16176): Terminating (SIGTERM)
01:15:07.529290 run iperf3-srv_10.42.42.10(pid=16177): Terminating (SIGTERM)
01:15:07.572601 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16183): Terminating (SIGTERM)
01:15:07.615562 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16186): Terminating (SIGTERM)
01:15:07.658066 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16189): Terminating (SIGTERM)
01:15:07.668319 ---      ParallelTerminationStrategy: PID 16176 died...
01:15:07.726167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16176): Terminated: ok {rc=0}
01:15:07.736622 ---      ParallelTerminationStrategy: PID 16177 died...
01:15:07.793649 run iperf3-srv_10.42.42.10(pid=16177): Terminated {rc=256}
01:15:07.803925 ---      ParallelTerminationStrategy: PID 16183 died...
01:15:07.861002 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16183): Terminated: ok {rc=0}
01:15:07.871299 ---      ParallelTerminationStrategy: PID 16186 died...
01:15:07.928225 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16186): Terminated: ok {rc=0}
01:15:07.938586 ---      ParallelTerminationStrategy: PID 16189 died...
01:15:07.995205 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16189): Terminated: ok {rc=0}
01:15:08.082919 bus                          /gobi_6: Setting Powered False
