
----------------------------------------------
trial-2384 gprs:nanobts+band-900 iperf3m4.py
----------------------------------------------
01:20:23.989094 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.000873 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
01:20:24.144008 tst                      iperf3m4.py: using LAC 32642
01:20:24.272441 tst                      iperf3m4.py: using RAC 2
01:20:24.400878 tst                      iperf3m4.py: using CellId 32642
01:20:24.529517 tst                      iperf3m4.py: using BVCI 32643
01:20:24.554711 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.566029 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.577122 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.588476 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.599917 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.611302 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.622837 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.634130 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
01:20:24.645632 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
01:20:24.768042 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
01:20:24.889261 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
01:20:25.010147 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
01:20:25.293456 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
01:20:25.421632 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:20:25.739336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16558): Launched
01:20:26.003389 run iperf3-srv_10.42.42.10(pid=16559): Launched
01:20:26.190648 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
01:20:26.319229 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:20:26.637626 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16560): Launched
01:20:26.902399 run iperf3-srv_10.42.42.10(pid=16561): Launched
01:20:27.089452 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
01:20:27.217340 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:20:27.537773 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16562): Launched
01:20:27.801568 run iperf3-srv_10.42.42.10(pid=16563): Launched
01:20:27.987444 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
01:20:28.114450 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:20:28.432451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16564): Launched
01:20:28.696855 run iperf3-srv_10.42.42.10(pid=16565): Launched
01:20:28.883733 tst                    iperf3m4.py:8: start network...
01:20:29.011399 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:20:29.506910 run         create_hlr_db(pid=16566): Launched
01:20:29.682473 bus                          /gobi_6: Setting Powered False
01:20:30.704174 run         create_hlr_db(pid=16566): Terminated: ok {rc=0}
01:20:31.175360 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16568): Launched
01:20:31.535918 run   osmo-hlr_10.42.42.2(pid=16569): Launched
01:20:31.692085 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:20:32.467679 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16571): Launched
01:20:32.801925 run   osmo-stp_10.42.42.5(pid=16572): Launched
01:20:32.922266 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:20:33.499630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16574): Launched
01:20:33.618503 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:20:33.907763 run              patchelf(pid=16575): Launched
01:20:34.101197 run   osmo-stp_10.42.42.5(pid=16572): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16572)]
01:20:34.242680 run   osmo-stp_10.42.42.5(pid=16572): stdout: 
| (launched: 2022-12-13_01:20:32.637467)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:20:34.384137 run   osmo-stp_10.42.42.5(pid=16572): stderr: 
| [0;m[38;5;43m20221213012032826 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213012032826 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213012032827 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213012032827 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213012032828 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213012032828 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213012032828 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:20:34.521787 run   osmo-stp_10.42.42.5(pid=16572): stdout: 
| (launched: 2022-12-13_01:20:32.637467)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:20:34.657768 run   osmo-stp_10.42.42.5(pid=16572): stderr: 
| [0;m[38;5;43m20221213012032826 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213012032826 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213012032827 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213012032827 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213012032828 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213012032828 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213012032828 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:20:34.816831 run              patchelf(pid=16575): Terminating (SIGINT)
01:20:35.003515 run              patchelf(pid=16575): Terminated: ok {rc=0}
01:20:35.037583 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16572): Process ended prematurely: osmo-stp_10.42.42.5(pid=16572) [trial-2384↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16572)]  [trial-2384↪gprs:nanobts+band-900↪iperf3m4.py:8]
01:20:35.047385 tst                    iperf3m4.py:8: Test FAILED (11.1 sec)
01:20:35.112429 run   osmo-hlr_10.42.42.2(pid=16569): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:nanobts+band-900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16569)]
01:20:35.164900 run   osmo-hlr_10.42.42.2(pid=16569): stdout: 
| (launched: 2022-12-13_01:20:31.346750) 
01:20:35.217998 run   osmo-hlr_10.42.42.2(pid=16569): stderr: 
| [0;m[1;31m20221213012031755 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213012031755 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213012031755 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213012031755 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213012031756 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213012031756 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213012031779 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213012031802 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213012031802 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213012031802 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:20:35.262780 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16558): Terminating (SIGTERM)
01:20:35.305441 run iperf3-srv_10.42.42.10(pid=16559): Terminating (SIGTERM)
01:20:35.348243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16560): Terminating (SIGTERM)
01:20:35.391428 run iperf3-srv_10.42.42.10(pid=16561): Terminating (SIGTERM)
01:20:35.434302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16562): Terminating (SIGTERM)
01:20:35.476647 run iperf3-srv_10.42.42.10(pid=16563): Terminating (SIGTERM)
01:20:35.521417 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16564): Terminating (SIGTERM)
01:20:35.563886 run iperf3-srv_10.42.42.10(pid=16565): Terminating (SIGTERM)
01:20:35.605924 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16568): Terminating (SIGTERM)
01:20:35.648771 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16571): Terminating (SIGTERM)
01:20:35.690725 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16574): Terminating (SIGTERM)
01:20:35.701076 ---      ParallelTerminationStrategy: PID 16558 died...
01:20:35.758098 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16558): Terminated: ok {rc=0}
01:20:35.768447 ---      ParallelTerminationStrategy: PID 16559 died...
01:20:35.824588 run iperf3-srv_10.42.42.10(pid=16559): Terminated {rc=256}
01:20:35.835044 ---      ParallelTerminationStrategy: PID 16560 died...
01:20:35.891324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16560): Terminated: ok {rc=0}
01:20:35.901735 ---      ParallelTerminationStrategy: PID 16561 died...
01:20:35.957856 run iperf3-srv_10.42.42.10(pid=16561): Terminated {rc=256}
01:20:35.968092 ---      ParallelTerminationStrategy: PID 16562 died...
01:20:36.024825 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16562): Terminated: ok {rc=0}
01:20:36.035166 ---      ParallelTerminationStrategy: PID 16563 died...
01:20:36.091062 run iperf3-srv_10.42.42.10(pid=16563): Terminated {rc=256}
01:20:36.101817 ---      ParallelTerminationStrategy: PID 16564 died...
01:20:36.157849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16564): Terminated: ok {rc=0}
01:20:36.168555 ---      ParallelTerminationStrategy: PID 16565 died...
01:20:36.224796 run iperf3-srv_10.42.42.10(pid=16565): Terminated {rc=256}
01:20:36.235134 ---      ParallelTerminationStrategy: PID 16568 died...
01:20:36.291582 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16568): Terminated: ok {rc=0}
01:20:36.302018 ---      ParallelTerminationStrategy: PID 16571 died...
01:20:36.358731 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16571): Terminated: ok {rc=0}
01:20:36.369133 ---      ParallelTerminationStrategy: PID 16574 died...
01:20:36.425538 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16574): Terminated: ok {rc=0}
01:20:36.512136 bus                          /gobi_4: Setting Powered False
01:20:37.619596 bus                          /gobi_4: Setting Powered False
01:20:38.730555 bus                          /gobi_1: Setting Powered False
01:20:39.833137 bus                          /gobi_1: Setting Powered False
01:20:40.942185 bus                          /gobi_0: Setting Powered False
01:20:42.048425 bus                          /gobi_0: Setting Powered False
01:20:43.161054 bus                          /gobi_6: Setting Powered False
