
----------------------------------------------
trial-2384 gprs:sysmo+mod-bts0-egprs iperf3m4.py
----------------------------------------------
00:17:07.589988 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:07.601991 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:17:07.731658 tst                      iperf3m4.py: using LAC 32308
00:17:07.852062 tst                      iperf3m4.py: using RAC 178
00:17:07.972753 tst                      iperf3m4.py: using CellId 32308
00:17:08.093896 tst                      iperf3m4.py: using BVCI 32309
00:17:08.117846 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.128652 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.139327 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.149986 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.160548 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.171119 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.181955 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.192709 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:17:08.203484 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:17:08.319517 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:17:08.442103 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:17:08.558751 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:17:08.854456 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
00:17:08.990664 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:17:09.329943 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10530): Launched
00:17:09.610819 run iperf3-srv_10.42.42.10(pid=10531): Launched
00:17:09.810612 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
00:17:09.946457 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:17:10.284231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10532): Launched
00:17:10.565140 run iperf3-srv_10.42.42.10(pid=10533): Launched
00:17:10.765221 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
00:17:10.901613 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:17:11.239192 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10534): Launched
00:17:11.519628 run iperf3-srv_10.42.42.10(pid=10535): Launched
00:17:11.720661 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
00:17:11.857259 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:17:12.195826 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10536): Launched
00:17:12.476857 run iperf3-srv_10.42.42.10(pid=10537): Launched
00:17:12.677723 tst                    iperf3m4.py:8: start network...
00:17:12.814304 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:17:13.330934 run         create_hlr_db(pid=10538): Launched
00:17:13.519255 bus                          /gobi_6: Setting Powered False
00:17:14.541151 run         create_hlr_db(pid=10538): Terminated: ok {rc=0}
00:17:14.948245 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10540): Launched
00:17:15.251676 run   osmo-hlr_10.42.42.2(pid=10541): Launched
00:17:15.362721 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:17:15.897486 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10543): Launched
00:17:16.256655 run   osmo-stp_10.42.42.5(pid=10544): Launched
00:17:16.492658 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:17:17.118722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10546): Launched
00:17:17.239150 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:17:17.550826 run              patchelf(pid=10547): Launched
00:17:17.742373 run   osmo-stp_10.42.42.5(pid=10544): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10544)]
00:17:17.881172 run   osmo-stp_10.42.42.5(pid=10544): stdout: 
| (launched: 2022-12-13_00:17:16.060082)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:17:18.020873 run   osmo-stp_10.42.42.5(pid=10544): stderr: 
| [0;m[38;5;43m20221213001716399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213001716399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213001716399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213001716400 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213001716400 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213001716400 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213001716400 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:17:18.155481 run   osmo-stp_10.42.42.5(pid=10544): stdout: 
| (launched: 2022-12-13_00:17:16.060082)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:17:18.290052 run   osmo-stp_10.42.42.5(pid=10544): stderr: 
| [0;m[38;5;43m20221213001716399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213001716399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213001716399 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213001716400 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213001716400 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213001716400 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213001716400 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:17:18.446399 run              patchelf(pid=10547): Terminating (SIGINT)
00:17:18.630381 run              patchelf(pid=10547): Terminated: ok {rc=0}
00:17:18.663716 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10544): Process ended prematurely: osmo-stp_10.42.42.5(pid=10544) [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10544)]  [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py:8]
00:17:18.674273 tst                    iperf3m4.py:8: Test FAILED (11.1 sec)
00:17:18.739282 run   osmo-hlr_10.42.42.2(pid=10541): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10541)]
00:17:18.792146 run   osmo-hlr_10.42.42.2(pid=10541): stdout: 
| (launched: 2022-12-13_00:17:15.101503) 
00:17:18.845451 run   osmo-hlr_10.42.42.2(pid=10541): stderr: 
| [0;m[1;31m20221213001715279 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213001715279 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213001715279 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213001715279 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213001715280 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213001715280 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213001715292 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo+mod-bts0-egprs/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213001715303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213001715303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213001715303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:17:18.890450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10530): Terminating (SIGTERM)
00:17:18.933071 run iperf3-srv_10.42.42.10(pid=10531): Terminating (SIGTERM)
00:17:18.975623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10532): Terminating (SIGTERM)
00:17:19.018213 run iperf3-srv_10.42.42.10(pid=10533): Terminating (SIGTERM)
00:17:19.060783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10534): Terminating (SIGTERM)
00:17:19.103740 run iperf3-srv_10.42.42.10(pid=10535): Terminating (SIGTERM)
00:17:19.146299 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10536): Terminating (SIGTERM)
00:17:19.188604 run iperf3-srv_10.42.42.10(pid=10537): Terminating (SIGTERM)
00:17:19.231284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10540): Terminating (SIGTERM)
00:17:19.273884 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10543): Terminating (SIGTERM)
00:17:19.316372 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10546): Terminating (SIGTERM)
00:17:19.326304 ---      ParallelTerminationStrategy: PID 10530 died...
00:17:19.382930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10530): Terminated: ok {rc=0}
00:17:19.393167 ---      ParallelTerminationStrategy: PID 10531 died...
00:17:19.449137 run iperf3-srv_10.42.42.10(pid=10531): Terminated {rc=256}
00:17:19.459475 ---      ParallelTerminationStrategy: PID 10532 died...
00:17:19.515601 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10532): Terminated: ok {rc=0}
00:17:19.525999 ---      ParallelTerminationStrategy: PID 10533 died...
00:17:19.582284 run iperf3-srv_10.42.42.10(pid=10533): Terminated {rc=256}
00:17:19.592343 ---      ParallelTerminationStrategy: PID 10534 died...
00:17:19.648990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10534): Terminated: ok {rc=0}
00:17:19.659391 ---      ParallelTerminationStrategy: PID 10535 died...
00:17:19.715960 run iperf3-srv_10.42.42.10(pid=10535): Terminated {rc=256}
00:17:19.726249 ---      ParallelTerminationStrategy: PID 10536 died...
00:17:19.782298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10536): Terminated: ok {rc=0}
00:17:19.792618 ---      ParallelTerminationStrategy: PID 10537 died...
00:17:19.848717 run iperf3-srv_10.42.42.10(pid=10537): Terminated {rc=256}
00:17:19.859128 ---      ParallelTerminationStrategy: PID 10540 died...
00:17:19.915544 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10540): Terminated: ok {rc=0}
00:17:19.925799 ---      ParallelTerminationStrategy: PID 10543 died...
00:17:19.982537 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10543): Terminated: ok {rc=0}
00:17:19.992670 ---      ParallelTerminationStrategy: PID 10546 died...
00:17:20.049746 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10546): Terminated: ok {rc=0}
00:17:20.137952 bus                          /gobi_4: Setting Powered False
00:17:21.242496 bus                          /gobi_4: Setting Powered False
00:17:22.354507 bus                          /gobi_1: Setting Powered False
00:17:23.457968 bus                          /gobi_1: Setting Powered False
00:17:24.569671 bus                          /gobi_0: Setting Powered False
00:17:25.673658 bus                          /gobi_0: Setting Powered False
00:17:26.786342 bus                          /gobi_6: Setting Powered False
