
----------------------------------------------
trial-2384 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py
----------------------------------------------
01:09:33.131226 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.142510 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
01:09:33.300689 tst         cs_paging_gprs_active.py: using LAC 32584
01:09:33.424927 tst         cs_paging_gprs_active.py: using RAC 199
01:09:33.549471 tst         cs_paging_gprs_active.py: using CellId 32584
01:09:33.673239 tst         cs_paging_gprs_active.py: using BVCI 32585
01:09:33.696988 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.708324 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.719440 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.731182 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.742827 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.754522 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.766305 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.777719 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:09:33.789505 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
01:09:33.912108 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
01:09:34.198464 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
01:09:34.327548 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:09:34.668177 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15804): Launched
01:09:34.956093 run iperf3-srv_10.42.42.10(pid=15805): Launched
01:09:35.159709 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
01:09:35.298946 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:09:35.643939 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15806): Launched
01:09:35.931049 run iperf3-srv_10.42.42.10(pid=15807): Launched
01:09:36.134938 tst      cs_paging_gprs_active.py:38: start network...
01:09:36.274259 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:09:36.801703 run         create_hlr_db(pid=15808): Launched
01:09:36.993468 bus                          /gobi_6: Setting Powered False
01:09:38.014462 run         create_hlr_db(pid=15808): Terminated: ok {rc=0}
01:09:38.459232 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15810): Launched
01:09:38.794147 run   osmo-hlr_10.42.42.2(pid=15811): Launched
01:09:38.915784 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:09:39.494181 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15813): Launched
01:09:39.828563 run   osmo-stp_10.42.42.5(pid=15814): Launched
01:09:39.951108 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:09:40.534841 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15816): Launched
01:09:40.653675 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:09:40.953016 run              patchelf(pid=15817): Launched
01:09:41.147176 run   osmo-stp_10.42.42.5(pid=15814): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15814)]
01:09:41.289392 run   osmo-stp_10.42.42.5(pid=15814): stdout: 
| (launched: 2022-12-13_01:09:39.663578)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:09:41.431434 run   osmo-stp_10.42.42.5(pid=15814): stderr: 
| [0;m[38;5;43m20221213010939858 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213010939858 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213010939858 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213010939859 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010939859 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010939859 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010939859 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:09:41.569004 run   osmo-stp_10.42.42.5(pid=15814): stdout: 
| (launched: 2022-12-13_01:09:39.663578)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:09:41.705212 run   osmo-stp_10.42.42.5(pid=15814): stderr: 
| [0;m[38;5;43m20221213010939858 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213010939858 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213010939858 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213010939859 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010939859 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010939859 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010939859 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:09:41.863922 run              patchelf(pid=15817): Terminating (SIGINT)
01:09:42.050792 run              patchelf(pid=15817): Terminated: ok {rc=0}
01:09:42.084998 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15814): Process ended prematurely: osmo-stp_10.42.42.5(pid=15814) [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15814)]  [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38]
01:09:42.095078 tst      cs_paging_gprs_active.py:38: Test FAILED (9.0 sec)
01:09:42.159737 run   osmo-hlr_10.42.42.2(pid=15811): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15811)]
01:09:42.212433 run   osmo-hlr_10.42.42.2(pid=15811): stdout: 
| (launched: 2022-12-13_01:09:38.628588) 
01:09:42.265515 run   osmo-hlr_10.42.42.2(pid=15811): stderr: 
| [0;m[1;31m20221213010938827 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213010938827 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213010938827 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213010938827 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213010938827 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213010938827 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213010938839 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213010938847 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213010938847 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213010938847 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:09:42.310373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15804): Terminating (SIGTERM)
01:09:42.353311 run iperf3-srv_10.42.42.10(pid=15805): Terminating (SIGTERM)
01:09:42.395534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15806): Terminating (SIGTERM)
01:09:42.438394 run iperf3-srv_10.42.42.10(pid=15807): Terminating (SIGTERM)
01:09:42.481148 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15810): Terminating (SIGTERM)
01:09:42.523556 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15813): Terminating (SIGTERM)
01:09:42.566539 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15816): Terminating (SIGTERM)
01:09:42.576428 ---      ParallelTerminationStrategy: PID 15804 died...
01:09:42.633398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15804): Terminated: ok {rc=0}
01:09:42.643589 ---      ParallelTerminationStrategy: PID 15805 died...
01:09:42.699958 run iperf3-srv_10.42.42.10(pid=15805): Terminated {rc=256}
01:09:42.710488 ---      ParallelTerminationStrategy: PID 15806 died...
01:09:42.766837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15806): Terminated: ok {rc=0}
01:09:42.777372 ---      ParallelTerminationStrategy: PID 15807 died...
01:09:42.833724 run iperf3-srv_10.42.42.10(pid=15807): Terminated {rc=256}
01:09:42.844180 ---      ParallelTerminationStrategy: PID 15810 died...
01:09:42.900915 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15810): Terminated: ok {rc=0}
01:09:42.911526 ---      ParallelTerminationStrategy: PID 15813 died...
01:09:42.968495 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15813): Terminated: ok {rc=0}
01:09:42.978687 ---      ParallelTerminationStrategy: PID 15816 died...
01:09:43.035325 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15816): Terminated: ok {rc=0}
01:09:43.123131 bus                          /gobi_0: Setting Powered False
01:09:44.231589 bus                          /gobi_0: Setting Powered False
01:09:45.340708 bus                          /gobi_6: Setting Powered False
