
----------------------------------------------
trial-2384 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
00:53:37.808128 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:37.819461 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
00:53:37.959020 tst         cs_paging_gprs_active.py: using LAC 32500
00:53:38.079390 tst         cs_paging_gprs_active.py: using RAC 115
00:53:38.206712 tst         cs_paging_gprs_active.py: using CellId 32500
00:53:38.328388 tst         cs_paging_gprs_active.py: using BVCI 32501
00:53:38.351962 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.363277 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.374410 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.385565 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.396683 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.407799 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.419032 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.430071 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:53:38.441430 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
00:53:38.559160 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
00:53:38.840840 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
00:53:38.968220 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:53:39.288790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14163): Launched
00:53:39.558099 run iperf3-srv_10.42.42.10(pid=14164): Launched
00:53:39.745981 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
00:53:39.873880 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:53:40.196321 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14165): Launched
00:53:40.462452 run iperf3-srv_10.42.42.10(pid=14166): Launched
00:53:40.649523 tst      cs_paging_gprs_active.py:38: start network...
00:53:40.777599 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:53:41.274910 run         create_hlr_db(pid=14167): Launched
00:53:41.452251 bus                          /gobi_6: Setting Powered False
00:53:42.474546 run         create_hlr_db(pid=14167): Terminated: ok {rc=0}
00:53:42.915227 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14169): Launched
00:53:43.249575 run   osmo-hlr_10.42.42.2(pid=14170): Launched
00:53:43.369386 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:53:43.947142 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14172): Launched
00:53:44.278855 run   osmo-stp_10.42.42.5(pid=14173): Launched
00:53:44.399722 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:53:44.977587 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14175): Launched
00:53:45.096214 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:53:45.384860 run              patchelf(pid=14176): Launched
00:53:45.577943 run   osmo-stp_10.42.42.5(pid=14173): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14173)]
00:53:45.719206 run   osmo-stp_10.42.42.5(pid=14173): stdout: 
| (launched: 2022-12-13_00:53:44.115250)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:53:45.869337 run   osmo-stp_10.42.42.5(pid=14173): stderr: 
| [0;m[38;5;43m20221213005344306 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213005344306 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213005344307 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213005344307 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213005344308 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213005344308 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213005344308 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:53:46.000938 run   osmo-stp_10.42.42.5(pid=14173): stdout: 
| (launched: 2022-12-13_00:53:44.115250)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:53:46.131452 run   osmo-stp_10.42.42.5(pid=14173): stderr: 
| [0;m[38;5;43m20221213005344306 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213005344306 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213005344307 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213005344307 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213005344308 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213005344308 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213005344308 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:53:46.283209 run              patchelf(pid=14176): Terminating (SIGINT)
00:53:46.499681 run              patchelf(pid=14176): Terminated: ok {rc=0}
00:53:46.540768 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14173): Process ended prematurely: osmo-stp_10.42.42.5(pid=14173) [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14173)]  [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
00:53:46.556129 tst      cs_paging_gprs_active.py:38: Test FAILED (8.8 sec)
00:53:46.628892 run   osmo-hlr_10.42.42.2(pid=14170): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14170)]
00:53:46.698318 run   osmo-hlr_10.42.42.2(pid=14170): stdout: 
| (launched: 2022-12-13_00:53:43.083729) 
00:53:46.765184 run   osmo-hlr_10.42.42.2(pid=14170): stderr: 
| [0;m[1;31m20221213005343281 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213005343281 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213005343281 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213005343281 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213005343281 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213005343281 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213005343294 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213005343303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213005343303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213005343303 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:53:46.811439 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14163): Terminating (SIGTERM)
00:53:46.863184 run iperf3-srv_10.42.42.10(pid=14164): Terminating (SIGTERM)
00:53:46.906740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14165): Terminating (SIGTERM)
00:53:46.955586 run iperf3-srv_10.42.42.10(pid=14166): Terminating (SIGTERM)
00:53:47.005981 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14169): Terminating (SIGTERM)
00:53:47.054030 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14172): Terminating (SIGTERM)
00:53:47.106653 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14175): Terminating (SIGTERM)
00:53:47.119174 ---      ParallelTerminationStrategy: PID 14163 died...
00:53:47.191737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14163): Terminated: ok {rc=0}
00:53:47.210237 ---      ParallelTerminationStrategy: PID 14164 died...
00:53:47.282367 run iperf3-srv_10.42.42.10(pid=14164): Terminated {rc=256}
00:53:47.296836 ---      ParallelTerminationStrategy: PID 14165 died...
00:53:47.358688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14165): Terminated: ok {rc=0}
00:53:47.371053 ---      ParallelTerminationStrategy: PID 14166 died...
00:53:47.441958 run iperf3-srv_10.42.42.10(pid=14166): Terminated {rc=256}
00:53:47.453880 ---      ParallelTerminationStrategy: PID 14169 died...
00:53:47.516188 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14169): Terminated: ok {rc=0}
00:53:47.526481 ---      ParallelTerminationStrategy: PID 14172 died...
00:53:47.600175 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14172): Terminated: ok {rc=0}
00:53:47.610454 ---      ParallelTerminationStrategy: PID 14175 died...
00:53:47.676922 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14175): Terminated: ok {rc=0}
00:53:47.769605 bus                          /gobi_0: Setting Powered False
00:53:48.924655 bus                          /gobi_0: Setting Powered False
00:53:50.049379 bus                          /gobi_6: Setting Powered False
