
----------------------------------------------
trial-2387 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
09:44:51.371390 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:51.383110 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
09:44:51.524132 tst         cs_paging_gprs_active.py: using LAC 33116
09:44:51.648250 tst         cs_paging_gprs_active.py: using RAC 221
09:44:51.773869 tst         cs_paging_gprs_active.py: using CellId 33116
09:44:51.899640 tst         cs_paging_gprs_active.py: using BVCI 33117
09:44:51.923879 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:51.935675 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:51.947204 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:51.958821 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:51.970413 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:51.981951 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:51.993659 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:52.005225 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
09:44:52.017016 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
09:44:52.135356 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
09:44:52.423461 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
09:44:52.555753 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
09:44:52.881727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1360): Launched
09:44:53.152111 run iperf3-srv_10.42.42.10(pid=1361): Launched
09:44:53.346029 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
09:44:53.477649 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
09:44:53.803604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1362): Launched
09:44:54.074662 run iperf3-srv_10.42.42.10(pid=1363): Launched
09:44:54.267580 tst      cs_paging_gprs_active.py:38: start network...
09:44:54.399113 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:44:54.906345 run          create_hlr_db(pid=1364): Launched
09:44:55.089048 bus                          /gobi_6: Setting Powered False
09:44:56.110649 run          create_hlr_db(pid=1364): Terminated: ok {rc=0}
09:44:56.530827 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1366): Launched
09:44:56.846671 run    osmo-hlr_10.42.42.2(pid=1367): Launched
09:44:56.962478 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:44:57.509729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1369): Launched
09:44:57.826251 run    osmo-stp_10.42.42.5(pid=1370): Launched
09:44:57.941157 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:44:58.493947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1372): Launched
09:44:58.607067 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:44:58.882676 run               patchelf(pid=1373): Launched
09:44:59.067823 run    osmo-stp_10.42.42.5(pid=1370): ERR: Terminated: ERROR {rc=1}  [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1370)]
09:44:59.203145 run    osmo-stp_10.42.42.5(pid=1370): stdout: 
| (launched: 2022-12-13_09:44:57.670892)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:44:59.339225 run    osmo-stp_10.42.42.5(pid=1370): stderr: 
| [0;m[38;5;43m20221213094457864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213094457864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213094457864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213094457865 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213094457865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213094457865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213094457865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:44:59.470302 run    osmo-stp_10.42.42.5(pid=1370): stdout: 
| (launched: 2022-12-13_09:44:57.670892)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:44:59.599816 run    osmo-stp_10.42.42.5(pid=1370): stderr: 
| [0;m[38;5;43m20221213094457864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213094457864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213094457864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213094457865 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213094457865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213094457865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213094457865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:44:59.751043 run               patchelf(pid=1373): Terminating (SIGINT)
09:44:59.929066 run               patchelf(pid=1373): Terminated: ok {rc=0}
09:44:59.961668 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1370): Process ended prematurely: osmo-stp_10.42.42.5(pid=1370) [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1370)]  [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
09:44:59.971468 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
09:45:00.033296 run    osmo-hlr_10.42.42.2(pid=1367): ERR: Terminated: ERROR {rc=237}  [trial-2387↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1367)]
09:45:00.084120 run    osmo-hlr_10.42.42.2(pid=1367): stdout: 
| (launched: 2022-12-13_09:44:56.691816) 
09:45:00.135587 run    osmo-hlr_10.42.42.2(pid=1367): stderr: 
| [0;m[1;31m20221213094456890 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213094456890 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213094456890 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213094456890 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213094456890 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213094456890 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213094456904 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213094456914 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213094456914 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213094456914 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:45:00.179449 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1360): Terminating (SIGTERM)
09:45:00.220887 run iperf3-srv_10.42.42.10(pid=1361): Terminating (SIGTERM)
09:45:00.262611 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1362): Terminating (SIGTERM)
09:45:00.303865 run iperf3-srv_10.42.42.10(pid=1363): Terminating (SIGTERM)
09:45:00.345529 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1366): Terminating (SIGTERM)
09:45:00.386742 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1369): Terminating (SIGTERM)
09:45:00.428021 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1372): Terminating (SIGTERM)
09:45:00.437575 ---      ParallelTerminationStrategy: PID 1360 died...
09:45:00.493058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1360): Terminated: ok {rc=0}
09:45:00.502928 ---      ParallelTerminationStrategy: PID 1361 died...
09:45:00.557643 run iperf3-srv_10.42.42.10(pid=1361): Terminated {rc=256}
09:45:00.567375 ---      ParallelTerminationStrategy: PID 1362 died...
09:45:00.622109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1362): Terminated: ok {rc=0}
09:45:00.631888 ---      ParallelTerminationStrategy: PID 1363 died...
09:45:00.686288 run iperf3-srv_10.42.42.10(pid=1363): Terminated {rc=256}
09:45:00.696124 ---      ParallelTerminationStrategy: PID 1366 died...
09:45:00.750612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1366): Terminated: ok {rc=0}
09:45:00.760288 ---      ParallelTerminationStrategy: PID 1369 died...
09:45:00.814649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1369): Terminated: ok {rc=0}
09:45:00.824334 ---      ParallelTerminationStrategy: PID 1372 died...
09:45:00.880864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1372): Terminated: ok {rc=0}
09:45:00.980340 bus                          /gobi_0: Setting Powered False
09:45:02.105280 bus                          /gobi_0: Setting Powered False
09:45:03.219109 bus                          /gobi_6: Setting Powered False
