
----------------------------------------------
trial-2388 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
11:18:01.880034 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:01.892896 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
11:18:02.031939 tst         cs_paging_gprs_active.py: using LAC 33577
11:18:02.152506 tst         cs_paging_gprs_active.py: using RAC 172
11:18:02.289723 tst         cs_paging_gprs_active.py: using CellId 33577
11:18:02.415414 tst         cs_paging_gprs_active.py: using BVCI 33578
11:18:02.438598 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.450388 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.461915 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.473235 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.484827 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.496370 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.510554 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.522980 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:18:02.535299 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
11:18:02.654217 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
11:18:02.928919 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
11:18:03.052181 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:18:03.358309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13240): Launched
11:18:03.612109 run iperf3-srv_10.42.42.10(pid=13241): Launched
11:18:03.791673 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
11:18:03.915211 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:18:04.220306 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13242): Launched
11:18:04.474133 run iperf3-srv_10.42.42.10(pid=13243): Launched
11:18:04.652880 tst      cs_paging_gprs_active.py:38: start network...
11:18:04.775444 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:18:05.253095 run         create_hlr_db(pid=13244): Launched
11:18:05.423875 bus                          /gobi_6: Setting Powered False
11:18:06.446025 run         create_hlr_db(pid=13244): Terminated: ok {rc=0}
11:18:06.868701 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13246): Launched
11:18:07.186926 run   osmo-hlr_10.42.42.2(pid=13247): Launched
11:18:07.304640 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:18:07.856800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13249): Launched
11:18:08.174710 run   osmo-stp_10.42.42.5(pid=13250): Launched
11:18:08.291282 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:18:08.843846 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13252): Launched
11:18:08.957957 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:18:09.234730 run              patchelf(pid=13253): Launched
11:18:09.420619 run   osmo-stp_10.42.42.5(pid=13250): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13250)]
11:18:09.556847 run   osmo-stp_10.42.42.5(pid=13250): stdout: 
| (launched: 2022-12-13_11:18:08.018245)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:18:09.693524 run   osmo-stp_10.42.42.5(pid=13250): stderr: 
| [0;m[38;5;43m20221213111808210 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213111808210 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213111808210 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213111808211 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213111808211 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213111808211 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213111808211 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:18:09.825198 run   osmo-stp_10.42.42.5(pid=13250): stdout: 
| (launched: 2022-12-13_11:18:08.018245)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:18:09.955863 run   osmo-stp_10.42.42.5(pid=13250): stderr: 
| [0;m[38;5;43m20221213111808210 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213111808210 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213111808210 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213111808211 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213111808211 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213111808211 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213111808211 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:18:10.109040 run              patchelf(pid=13253): Terminating (SIGINT)
11:18:10.288059 run              patchelf(pid=13253): Terminated: ok {rc=0}
11:18:10.321272 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13250): Process ended prematurely: osmo-stp_10.42.42.5(pid=13250) [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13250)]  [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
11:18:10.331125 tst      cs_paging_gprs_active.py:38: Test FAILED (8.5 sec)
11:18:10.393853 run   osmo-hlr_10.42.42.2(pid=13247): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13247)]
11:18:10.445268 run   osmo-hlr_10.42.42.2(pid=13247): stdout: 
| (launched: 2022-12-13_11:18:07.030803) 
11:18:10.497108 run   osmo-hlr_10.42.42.2(pid=13247): stderr: 
| [0;m[1;31m20221213111807232 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213111807232 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213111807232 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213111807232 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213111807232 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213111807232 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213111807245 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213111807253 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213111807254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213111807254 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:18:10.541323 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13240): Terminating (SIGTERM)
11:18:10.583441 run iperf3-srv_10.42.42.10(pid=13241): Terminating (SIGTERM)
11:18:10.625915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13242): Terminating (SIGTERM)
11:18:10.667540 run iperf3-srv_10.42.42.10(pid=13243): Terminating (SIGTERM)
11:18:10.709932 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13246): Terminating (SIGTERM)
11:18:10.752020 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13249): Terminating (SIGTERM)
11:18:10.794265 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13252): Terminating (SIGTERM)
11:18:10.803797 ---      ParallelTerminationStrategy: PID 13240 died...
11:18:10.859696 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13240): Terminated: ok {rc=0}
11:18:10.869617 ---      ParallelTerminationStrategy: PID 13241 died...
11:18:10.924920 run iperf3-srv_10.42.42.10(pid=13241): Terminated {rc=256}
11:18:10.934703 ---      ParallelTerminationStrategy: PID 13242 died...
11:18:10.990359 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13242): Terminated: ok {rc=0}
11:18:11.000214 ---      ParallelTerminationStrategy: PID 13243 died...
11:18:11.056147 run iperf3-srv_10.42.42.10(pid=13243): Terminated {rc=256}
11:18:11.066037 ---      ParallelTerminationStrategy: PID 13246 died...
11:18:11.121776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13246): Terminated: ok {rc=0}
11:18:11.131603 ---      ParallelTerminationStrategy: PID 13249 died...
11:18:11.187213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13249): Terminated: ok {rc=0}
11:18:11.197174 ---      ParallelTerminationStrategy: PID 13252 died...
11:18:11.253047 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13252): Terminated: ok {rc=0}
11:18:11.339352 bus                          /gobi_0: Setting Powered False
11:18:12.444369 bus                          /gobi_0: Setting Powered False
11:18:13.554207 bus                          /gobi_6: Setting Powered False
