
----------------------------------------------
trial-2388 gprs:trx-b200+mod-bts0-egprs iperf3m4.py
----------------------------------------------
10:29:03.919173 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:03.931295 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
10:29:04.075015 tst                      iperf3m4.py: using LAC 33318
10:29:04.198923 tst                      iperf3m4.py: using RAC 168
10:29:04.320562 tst                      iperf3m4.py: using CellId 33318
10:29:04.442725 tst                      iperf3m4.py: using BVCI 33319
10:29:04.466789 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.477848 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.488449 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.499117 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.509757 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.520520 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.531557 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.542345 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:04.553349 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:29:04.673574 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:29:04.797596 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:29:04.916565 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:29:05.222297 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
10:29:05.362693 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:29:05.712034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8986): Launched
10:29:06.002428 run iperf3-srv_10.42.42.10(pid=8987): Launched
10:29:06.207028 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
10:29:06.346605 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:29:06.695225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8988): Launched
10:29:06.983222 run iperf3-srv_10.42.42.10(pid=8989): Launched
10:29:07.188118 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
10:29:07.327432 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:29:07.674798 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8990): Launched
10:29:07.964028 run iperf3-srv_10.42.42.10(pid=8991): Launched
10:29:08.169034 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
10:29:08.308528 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:29:08.658218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8992): Launched
10:29:08.946478 run iperf3-srv_10.42.42.10(pid=8993): Launched
10:29:09.151404 tst                    iperf3m4.py:8: start network...
10:29:09.290853 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:29:09.819926 run          create_hlr_db(pid=8994): Launched
10:29:10.013914 bus                          /gobi_6: Setting Powered False
10:29:11.035128 run          create_hlr_db(pid=8994): Terminated: ok {rc=0}
10:29:11.455089 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8996): Launched
10:29:11.769993 run    osmo-hlr_10.42.42.2(pid=8997): Launched
10:29:11.896845 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:29:12.462235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8999): Launched
10:29:12.776735 run    osmo-stp_10.42.42.5(pid=9000): Launched
10:29:12.888609 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:29:13.434541 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9002): Launched
10:29:13.546281 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:29:13.822187 run               patchelf(pid=9003): Launched
10:29:14.004298 run    osmo-stp_10.42.42.5(pid=9000): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9000)]
10:29:14.137473 run    osmo-stp_10.42.42.5(pid=9000): stdout: 
| (launched: 2022-12-13_10:29:12.620032)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:29:14.270719 run    osmo-stp_10.42.42.5(pid=9000): stderr: 
| [0;m[38;5;43m20221213102912790 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213102912790 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213102912791 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213102912791 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102912792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102912792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102912792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:29:14.399359 run    osmo-stp_10.42.42.5(pid=9000): stdout: 
| (launched: 2022-12-13_10:29:12.620032)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:29:14.526570 run    osmo-stp_10.42.42.5(pid=9000): stderr: 
| [0;m[38;5;43m20221213102912790 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213102912790 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213102912791 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213102912791 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102912792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102912792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102912792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:29:14.675516 run               patchelf(pid=9003): Terminating (SIGINT)
10:29:14.850929 run               patchelf(pid=9003): Terminated: ok {rc=0}
10:29:14.882973 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9000): Process ended prematurely: osmo-stp_10.42.42.5(pid=9000) [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9000)]  [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py:8]
10:29:14.892270 tst                    iperf3m4.py:8: Test FAILED (11.0 sec)
10:29:14.953128 run    osmo-hlr_10.42.42.2(pid=8997): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8997)]
10:29:15.002312 run    osmo-hlr_10.42.42.2(pid=8997): stdout: 
| (launched: 2022-12-13_10:29:11.614627) 
10:29:15.052142 run    osmo-hlr_10.42.42.2(pid=8997): stderr: 
| [0;m[1;31m20221213102911791 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213102911791 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213102911791 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213102911791 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213102911791 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213102911791 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213102911807 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-egprs/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213102911816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213102911817 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213102911817 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:29:15.094666 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8986): Terminating (SIGTERM)
10:29:15.134826 run iperf3-srv_10.42.42.10(pid=8987): Terminating (SIGTERM)
10:29:15.174731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8988): Terminating (SIGTERM)
10:29:15.214620 run iperf3-srv_10.42.42.10(pid=8989): Terminating (SIGTERM)
10:29:15.254624 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8990): Terminating (SIGTERM)
10:29:15.294516 run iperf3-srv_10.42.42.10(pid=8991): Terminating (SIGTERM)
10:29:15.334752 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8992): Terminating (SIGTERM)
10:29:15.374607 run iperf3-srv_10.42.42.10(pid=8993): Terminating (SIGTERM)
10:29:15.414699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8996): Terminating (SIGTERM)
10:29:15.454618 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8999): Terminating (SIGTERM)
10:29:15.494435 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9002): Terminating (SIGTERM)
10:29:15.503298 ---      ParallelTerminationStrategy: PID 8986 died...
10:29:15.556750 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8986): Terminated: ok {rc=0}
10:29:15.566669 ---      ParallelTerminationStrategy: PID 8987 died...
10:29:15.620044 run iperf3-srv_10.42.42.10(pid=8987): Terminated {rc=256}
10:29:15.629749 ---      ParallelTerminationStrategy: PID 8988 died...
10:29:15.682932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8988): Terminated: ok {rc=0}
10:29:15.692491 ---      ParallelTerminationStrategy: PID 8989 died...
10:29:15.745772 run iperf3-srv_10.42.42.10(pid=8989): Terminated {rc=256}
10:29:15.755419 ---      ParallelTerminationStrategy: PID 8990 died...
10:29:15.808715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8990): Terminated: ok {rc=0}
10:29:15.818435 ---      ParallelTerminationStrategy: PID 8991 died...
10:29:15.882805 run iperf3-srv_10.42.42.10(pid=8991): Terminated {rc=256}
10:29:15.901694 ---      ParallelTerminationStrategy: PID 8992 died...
10:29:15.963257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8992): Terminated: ok {rc=0}
10:29:15.974267 ---      ParallelTerminationStrategy: PID 8993 died...
10:29:16.035383 run iperf3-srv_10.42.42.10(pid=8993): Terminated {rc=256}
10:29:16.048150 ---      ParallelTerminationStrategy: PID 8996 died...
10:29:16.107674 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8996): Terminated: ok {rc=0}
10:29:16.119429 ---      ParallelTerminationStrategy: PID 8999 died...
10:29:16.178360 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8999): Terminated: ok {rc=0}
10:29:16.189553 ---      ParallelTerminationStrategy: PID 9002 died...
10:29:16.250919 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9002): Terminated: ok {rc=0}
10:29:16.342947 bus                          /gobi_4: Setting Powered False
10:29:17.451435 bus                          /gobi_4: Setting Powered False
10:29:18.564382 bus                          /gobi_1: Setting Powered False
10:29:19.669093 bus                          /gobi_1: Setting Powered False
10:29:20.781553 bus                          /gobi_0: Setting Powered False
10:29:21.886222 bus                          /gobi_0: Setting Powered False
10:29:22.994941 bus                          /gobi_6: Setting Powered False
