
----------------------------------------------
trial-2388 gprs:trx-b200+mod-bts0-egprs ping.py
----------------------------------------------
10:29:24.065338 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.077000 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1)
10:29:24.217627 tst                          ping.py: using LAC 33319
10:29:24.346796 tst                          ping.py: using RAC 169
10:29:24.479442 tst                          ping.py: using CellId 33319
10:29:24.611709 tst                          ping.py: using BVCI 33320
10:29:24.636849 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.648394 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.659615 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.670826 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.682356 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.693827 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.705451 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:29:24.716799 tst     gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:29:25.014587 tst                       ping.py:19: start network...
10:29:25.151377 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:29:25.670170 run          create_hlr_db(pid=9004): Launched
10:29:25.860390 bus                          /gobi_6: Setting Powered False
10:29:26.881054 run          create_hlr_db(pid=9004): Terminated: ok {rc=0}
10:29:27.297883 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9006): Launched
10:29:27.608861 run    osmo-hlr_10.42.42.2(pid=9007): Launched
10:29:27.731222 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:29:28.272390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9009): Launched
10:29:28.582475 run    osmo-stp_10.42.42.5(pid=9010): Launched
10:29:28.693717 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:29:29.229408 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9012): Launched
10:29:29.338973 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:29:29.610305 run               patchelf(pid=9013): Launched
10:29:29.790603 run    osmo-stp_10.42.42.5(pid=9010): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9010)]
10:29:29.922201 run    osmo-stp_10.42.42.5(pid=9010): stdout: 
| (launched: 2022-12-13_10:29:28.427399)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:29:30.052735 run    osmo-stp_10.42.42.5(pid=9010): stderr: 
| [0;m[38;5;43m20221213102928598 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213102928598 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213102928599 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213102928599 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102928599 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102928600 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102928600 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:29:30.179567 run    osmo-stp_10.42.42.5(pid=9010): stdout: 
| (launched: 2022-12-13_10:29:28.427399)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:29:30.305197 run    osmo-stp_10.42.42.5(pid=9010): stderr: 
| [0;m[38;5;43m20221213102928598 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213102928598 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213102928599 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213102928599 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102928599 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102928600 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102928600 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:29:30.451748 run               patchelf(pid=9013): Terminating (SIGINT)
10:29:30.623787 run               patchelf(pid=9013): Terminated: ok {rc=0}
10:29:30.654947 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9010): Process ended prematurely: osmo-stp_10.42.42.5(pid=9010) [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9010)]  [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22]
10:29:30.663643 tst                       ping.py:22: Test FAILED (6.6 sec)
10:29:30.724278 run    osmo-hlr_10.42.42.2(pid=9007): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-b200+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9007)]
10:29:30.773713 run    osmo-hlr_10.42.42.2(pid=9007): stdout: 
| (launched: 2022-12-13_10:29:27.453291) 
10:29:30.823839 run    osmo-hlr_10.42.42.2(pid=9007): stderr: 
| [0;m[1;31m20221213102927630 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213102927630 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213102927630 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213102927630 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213102927630 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213102927630 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213102927642 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213102927651 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213102927651 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213102927651 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:29:30.868195 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9006): Terminating (SIGTERM)
10:29:30.918075 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9009): Terminating (SIGTERM)
10:29:30.972336 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9012): Terminating (SIGTERM)
10:29:30.983008 ---      ParallelTerminationStrategy: PID 9006 died...
10:29:31.038476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9006): Terminated: ok {rc=0}
10:29:31.048666 ---      ParallelTerminationStrategy: PID 9009 died...
10:29:31.115756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9009): Terminated: ok {rc=0}
10:29:31.128344 ---      ParallelTerminationStrategy: PID 9012 died...
10:29:31.195334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9012): Terminated: ok {rc=0}
10:29:31.297386 bus                          /gobi_6: Setting Powered False
