
----------------------------------------------
trial-2388 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py
----------------------------------------------
10:32:36.402044 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:36.416474 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
10:32:36.566009 tst                ping_idle_ping.py: using LAC 33335
10:32:36.696379 tst                ping_idle_ping.py: using RAC 185
10:32:36.827184 tst                ping_idle_ping.py: using CellId 33335
10:32:36.950990 tst                ping_idle_ping.py: using BVCI 33336
10:32:36.974588 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:36.986113 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:36.997376 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:37.008575 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:37.019686 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:37.030890 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:37.042178 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:32:37.053425 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:32:37.336388 tst             ping_idle_ping.py:24: start network...
10:32:37.464727 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:32:37.962759 run          create_hlr_db(pid=9226): Launched
10:32:38.139887 bus                          /gobi_6: Setting Powered False
10:32:39.161113 run          create_hlr_db(pid=9226): Terminated: ok {rc=0}
10:32:39.575449 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9228): Launched
10:32:39.884710 run    osmo-hlr_10.42.42.2(pid=9229): Launched
10:32:40.005926 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:32:40.548772 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9231): Launched
10:32:40.859286 run    osmo-stp_10.42.42.5(pid=9232): Launched
10:32:40.970383 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:32:41.511380 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9234): Launched
10:32:41.621610 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:32:41.892359 run               patchelf(pid=9235): Launched
10:32:42.072222 run    osmo-stp_10.42.42.5(pid=9232): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9232)]
10:32:42.203690 run    osmo-stp_10.42.42.5(pid=9232): stdout: 
| (launched: 2022-12-13_10:32:40.704656)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:32:42.335386 run    osmo-stp_10.42.42.5(pid=9232): stderr: 
| [0;m[38;5;43m20221213103240878 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213103240878 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213103240879 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213103240879 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213103240879 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213103240880 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213103240880 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:32:42.462594 run    osmo-stp_10.42.42.5(pid=9232): stdout: 
| (launched: 2022-12-13_10:32:40.704656)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:32:42.588416 run    osmo-stp_10.42.42.5(pid=9232): stderr: 
| [0;m[38;5;43m20221213103240878 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213103240878 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213103240879 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213103240879 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213103240879 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213103240880 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213103240880 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:32:42.735599 run               patchelf(pid=9235): Terminating (SIGINT)
10:32:42.908531 run               patchelf(pid=9235): Terminated: ok {rc=0}
10:32:42.940084 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9232): Process ended prematurely: osmo-stp_10.42.42.5(pid=9232) [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9232)]  [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27]
10:32:42.948790 tst             ping_idle_ping.py:27: Test FAILED (6.5 sec)
10:32:43.008985 run    osmo-hlr_10.42.42.2(pid=9229): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9229)]
10:32:43.058247 run    osmo-hlr_10.42.42.2(pid=9229): stdout: 
| (launched: 2022-12-13_10:32:39.731520) 
10:32:43.108116 run    osmo-hlr_10.42.42.2(pid=9229): stderr: 
| [0;m[1;31m20221213103239909 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213103239909 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213103239909 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213103239909 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213103239909 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213103239909 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213103239921 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213103239929 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213103239930 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213103239930 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:32:43.150534 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9228): Terminating (SIGTERM)
10:32:43.190654 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9231): Terminating (SIGTERM)
10:32:43.231154 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9234): Terminating (SIGTERM)
10:32:43.240519 ---      ParallelTerminationStrategy: PID 9228 died...
10:32:43.294400 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9228): Terminated: ok {rc=0}
10:32:43.304087 ---      ParallelTerminationStrategy: PID 9231 died...
10:32:43.357808 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9231): Terminated: ok {rc=0}
10:32:43.367497 ---      ParallelTerminationStrategy: PID 9234 died...
10:32:43.420874 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9234): Terminated: ok {rc=0}
10:32:43.506558 bus                          /gobi_6: Setting Powered False
