
----------------------------------------------
trial-2388 gprs:trx-lms iperf3m4.py
----------------------------------------------
10:54:18.964011 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:18.975549 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
10:54:19.114405 tst                      iperf3m4.py: using LAC 33451
10:54:19.241069 tst                      iperf3m4.py: using RAC 46
10:54:19.370577 tst                      iperf3m4.py: using CellId 33451
10:54:19.499205 tst                      iperf3m4.py: using BVCI 33452
10:54:19.524139 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.535311 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.546120 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.556802 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.567644 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.579121 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.590408 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.601475 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
10:54:19.612687 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
10:54:19.729352 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
10:54:19.856114 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
10:54:19.972204 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
10:54:20.249425 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
10:54:20.375342 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:54:20.690058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11300): Launched
10:54:20.951320 run iperf3-srv_10.42.42.10(pid=11301): Launched
10:54:21.134339 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
10:54:21.259269 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:54:21.572336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11302): Launched
10:54:21.831129 run iperf3-srv_10.42.42.10(pid=11303): Launched
10:54:22.013742 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
10:54:22.138689 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:54:22.450654 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11304): Launched
10:54:22.709621 run iperf3-srv_10.42.42.10(pid=11305): Launched
10:54:22.893110 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
10:54:23.018548 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:54:23.330274 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11306): Launched
10:54:23.590375 run iperf3-srv_10.42.42.10(pid=11307): Launched
10:54:23.773374 tst                    iperf3m4.py:8: start network...
10:54:23.898403 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:54:24.382314 run         create_hlr_db(pid=11308): Launched
10:54:24.554999 bus                          /gobi_6: Setting Powered False
10:54:25.578542 run         create_hlr_db(pid=11308): Terminated: ok {rc=0}
10:54:26.008873 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11310): Launched
10:54:26.334455 run   osmo-hlr_10.42.42.2(pid=11311): Launched
10:54:26.454945 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:54:27.017554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11313): Launched
10:54:27.343061 run   osmo-stp_10.42.42.5(pid=11314): Launched
10:54:27.460555 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:54:28.025091 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11316): Launched
10:54:28.140610 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:54:28.423022 run              patchelf(pid=11317): Launched
10:54:28.613007 run   osmo-stp_10.42.42.5(pid=11314): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-lms↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11314)]
10:54:28.751523 run   osmo-stp_10.42.42.5(pid=11314): stdout: 
| (launched: 2022-12-13_10:54:27.182495)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:54:28.890967 run   osmo-stp_10.42.42.5(pid=11314): stderr: 
| [0;m[38;5;43m20221213105427375 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213105427375 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213105427375 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213105427376 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213105427376 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213105427376 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213105427376 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:54:29.025333 run   osmo-stp_10.42.42.5(pid=11314): stdout: 
| (launched: 2022-12-13_10:54:27.182495)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:54:29.158409 run   osmo-stp_10.42.42.5(pid=11314): stderr: 
| [0;m[38;5;43m20221213105427375 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213105427375 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213105427375 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213105427376 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213105427376 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213105427376 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213105427376 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:54:29.312795 run              patchelf(pid=11317): Terminating (SIGINT)
10:54:29.494994 run              patchelf(pid=11317): Terminated: ok {rc=0}
10:54:29.528403 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11314): Process ended prematurely: osmo-stp_10.42.42.5(pid=11314) [trial-2388↪gprs:trx-lms↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11314)]  [trial-2388↪gprs:trx-lms↪iperf3m4.py:8]
10:54:29.538363 tst                    iperf3m4.py:8: Test FAILED (10.6 sec)
10:54:29.602756 run   osmo-hlr_10.42.42.2(pid=11311): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-lms↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11311)]
10:54:29.655027 run   osmo-hlr_10.42.42.2(pid=11311): stdout: 
| (launched: 2022-12-13_10:54:26.173720) 
10:54:29.707735 run   osmo-hlr_10.42.42.2(pid=11311): stderr: 
| [0;m[1;31m20221213105426372 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213105426373 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213105426373 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213105426373 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213105426373 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213105426373 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213105426385 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213105426393 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213105426393 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213105426394 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:54:29.752510 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11300): Terminating (SIGTERM)
10:54:29.794727 run iperf3-srv_10.42.42.10(pid=11301): Terminating (SIGTERM)
10:54:29.836771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11302): Terminating (SIGTERM)
10:54:29.878772 run iperf3-srv_10.42.42.10(pid=11303): Terminating (SIGTERM)
10:54:29.920980 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11304): Terminating (SIGTERM)
10:54:29.963043 run iperf3-srv_10.42.42.10(pid=11305): Terminating (SIGTERM)
10:54:30.005279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11306): Terminating (SIGTERM)
10:54:30.047231 run iperf3-srv_10.42.42.10(pid=11307): Terminating (SIGTERM)
10:54:30.089511 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11310): Terminating (SIGTERM)
10:54:30.131614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11313): Terminating (SIGTERM)
10:54:30.173846 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11316): Terminating (SIGTERM)
10:54:30.183520 ---      ParallelTerminationStrategy: PID 11300 died...
10:54:30.239896 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11300): Terminated: ok {rc=0}
10:54:30.249919 ---      ParallelTerminationStrategy: PID 11301 died...
10:54:30.305768 run iperf3-srv_10.42.42.10(pid=11301): Terminated {rc=256}
10:54:30.315802 ---      ParallelTerminationStrategy: PID 11302 died...
10:54:30.372319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11302): Terminated: ok {rc=0}
10:54:30.382306 ---      ParallelTerminationStrategy: PID 11303 died...
10:54:30.438368 run iperf3-srv_10.42.42.10(pid=11303): Terminated {rc=256}
10:54:30.448389 ---      ParallelTerminationStrategy: PID 11304 died...
10:54:30.504607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11304): Terminated: ok {rc=0}
10:54:30.514649 ---      ParallelTerminationStrategy: PID 11305 died...
10:54:30.570806 run iperf3-srv_10.42.42.10(pid=11305): Terminated {rc=256}
10:54:30.580845 ---      ParallelTerminationStrategy: PID 11306 died...
10:54:30.637495 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11306): Terminated: ok {rc=0}
10:54:30.647498 ---      ParallelTerminationStrategy: PID 11307 died...
10:54:30.703823 run iperf3-srv_10.42.42.10(pid=11307): Terminated {rc=256}
10:54:30.713951 ---      ParallelTerminationStrategy: PID 11310 died...
10:54:30.770364 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11310): Terminated: ok {rc=0}
10:54:30.780393 ---      ParallelTerminationStrategy: PID 11313 died...
10:54:30.836650 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11313): Terminated: ok {rc=0}
10:54:30.846725 ---      ParallelTerminationStrategy: PID 11316 died...
10:54:30.921533 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11316): Terminated: ok {rc=0}
10:54:31.024058 bus                          /gobi_4: Setting Powered False
10:54:32.154341 bus                          /gobi_4: Setting Powered False
10:54:33.265507 bus                          /gobi_1: Setting Powered False
10:54:34.372539 bus                          /gobi_1: Setting Powered False
10:54:35.483822 bus                          /gobi_0: Setting Powered False
10:54:36.585873 bus                          /gobi_0: Setting Powered False
10:54:37.697630 bus                          /gobi_6: Setting Powered False
