
----------------------------------------------
trial-2388 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
10:49:01.320047 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.332636 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
10:49:01.483177 tst         cs_paging_gprs_active.py: using LAC 33422
10:49:01.607771 tst         cs_paging_gprs_active.py: using RAC 17
10:49:01.755229 tst         cs_paging_gprs_active.py: using CellId 33422
10:49:01.878305 tst         cs_paging_gprs_active.py: using BVCI 33423
10:49:01.902851 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.915169 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.927405 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.940562 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.952719 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.967232 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.980377 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:01.993524 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:49:02.006568 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:49:02.130431 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:49:02.439782 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
10:49:02.577305 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:49:02.915051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10643): Launched
10:49:03.195602 run iperf3-srv_10.42.42.10(pid=10644): Launched
10:49:03.394955 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
10:49:03.530856 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:49:03.868081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10645): Launched
10:49:04.148162 run iperf3-srv_10.42.42.10(pid=10646): Launched
10:49:04.348529 tst      cs_paging_gprs_active.py:38: start network...
10:49:04.484629 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:49:04.997842 run         create_hlr_db(pid=10647): Launched
10:49:05.187028 bus                          /gobi_6: Setting Powered False
10:49:06.198401 run         create_hlr_db(pid=10647): Terminated: ok {rc=0}
10:49:06.642585 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10649): Launched
10:49:06.970274 run   osmo-hlr_10.42.42.2(pid=10650): Launched
10:49:07.092353 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:49:07.657741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10652): Launched
10:49:07.984800 run   osmo-stp_10.42.42.5(pid=10653): Launched
10:49:08.103200 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:49:08.673799 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10655): Launched
10:49:08.790401 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:49:09.076263 run              patchelf(pid=10656): Launched
10:49:09.268041 run   osmo-stp_10.42.42.5(pid=10653): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10653)]
10:49:09.407531 run   osmo-stp_10.42.42.5(pid=10653): stdout: 
| (launched: 2022-12-13_10:49:07.823306)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:49:09.547622 run   osmo-stp_10.42.42.5(pid=10653): stderr: 
| [0;m[38;5;43m20221213104908014 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213104908015 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213104908015 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213104908015 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213104908016 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213104908016 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213104908016 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:49:09.683160 run   osmo-stp_10.42.42.5(pid=10653): stdout: 
| (launched: 2022-12-13_10:49:07.823306)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:49:09.817344 run   osmo-stp_10.42.42.5(pid=10653): stderr: 
| [0;m[38;5;43m20221213104908014 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213104908015 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213104908015 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213104908015 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213104908016 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213104908016 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213104908016 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:49:09.973827 run              patchelf(pid=10656): Terminating (SIGINT)
10:49:10.157783 run              patchelf(pid=10656): Terminated: ok {rc=0}
10:49:10.191844 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10653): Process ended prematurely: osmo-stp_10.42.42.5(pid=10653) [trial-2388↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10653)]  [trial-2388↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
10:49:10.201899 tst      cs_paging_gprs_active.py:38: Test FAILED (8.9 sec)
10:49:10.266682 run   osmo-hlr_10.42.42.2(pid=10650): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10650)]
10:49:10.319656 run   osmo-hlr_10.42.42.2(pid=10650): stdout: 
| (launched: 2022-12-13_10:49:06.808153) 
10:49:10.373302 run   osmo-hlr_10.42.42.2(pid=10650): stderr: 
| [0;m[1;31m20221213104907007 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213104907007 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213104907007 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213104907007 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213104907007 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213104907007 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213104907022 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213104907030 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213104907030 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213104907030 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:49:10.418608 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10643): Terminating (SIGTERM)
10:49:10.460914 run iperf3-srv_10.42.42.10(pid=10644): Terminating (SIGTERM)
10:49:10.503493 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10645): Terminating (SIGTERM)
10:49:10.545966 run iperf3-srv_10.42.42.10(pid=10646): Terminating (SIGTERM)
10:49:10.588451 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10649): Terminating (SIGTERM)
10:49:10.630987 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10652): Terminating (SIGTERM)
10:49:10.673390 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10655): Terminating (SIGTERM)
10:49:10.683048 ---      ParallelTerminationStrategy: PID 10643 died...
10:49:10.739869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10643): Terminated: ok {rc=0}
10:49:10.749963 ---      ParallelTerminationStrategy: PID 10644 died...
10:49:10.806097 run iperf3-srv_10.42.42.10(pid=10644): Terminated {rc=256}
10:49:10.816047 ---      ParallelTerminationStrategy: PID 10645 died...
10:49:10.872205 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10645): Terminated: ok {rc=0}
10:49:10.882200 ---      ParallelTerminationStrategy: PID 10646 died...
10:49:10.938356 run iperf3-srv_10.42.42.10(pid=10646): Terminated {rc=256}
10:49:10.948301 ---      ParallelTerminationStrategy: PID 10649 died...
10:49:11.004637 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10649): Terminated: ok {rc=0}
10:49:11.014664 ---      ParallelTerminationStrategy: PID 10652 died...
10:49:11.071373 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10652): Terminated: ok {rc=0}
10:49:11.081530 ---      ParallelTerminationStrategy: PID 10655 died...
10:49:11.137741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10655): Terminated: ok {rc=0}
10:49:11.226082 bus                          /gobi_0: Setting Powered False
10:49:12.333678 bus                          /gobi_0: Setting Powered False
10:49:13.442647 bus                          /gobi_6: Setting Powered False
