
----------------------------------------------
trial-2392 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
18:11:14.932440 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:14.943653 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
18:11:15.095487 tst               switch_tch_pdch.py: using LAC 35356
18:11:15.215386 tst               switch_tch_pdch.py: using RAC 166
18:11:15.342928 tst               switch_tch_pdch.py: using CellId 35356
18:11:15.471267 tst               switch_tch_pdch.py: using BVCI 35357
18:11:15.496059 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:15.508103 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:15.519550 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:15.531091 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:15.543387 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:15.555638 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:15.568164 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
18:11:15.580408 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
18:11:15.699409 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
18:11:16.020489 tst            switch_tch_pdch.py:51: start network...
18:11:16.159291 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:11:16.679130 run         create_hlr_db(pid=15039): Launched
18:11:16.814975 bus                          /gobi_6: Setting Powered False
18:11:17.888590 run         create_hlr_db(pid=15039): Terminated: ok {rc=0}
18:11:18.294177 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15041): Launched
18:11:18.619530 run   osmo-hlr_10.42.42.2(pid=15042): Launched
18:11:18.740745 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:11:19.276698 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15044): Launched
18:11:19.602135 run   osmo-stp_10.42.42.5(pid=15045): Launched
18:11:19.720703 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:11:20.252432 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15047): Launched
18:11:20.359856 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:11:20.624345 run              patchelf(pid=15048): Launched
18:11:20.801349 run   osmo-stp_10.42.42.5(pid=15045): ERR: Terminated: ERROR {rc=1}  [trial-2392↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15045)]
18:11:20.930846 run   osmo-stp_10.42.42.5(pid=15045): stdout: 
| (launched: 2022-12-13_18:11:19.441102)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:11:21.060558 run   osmo-stp_10.42.42.5(pid=15045): stderr: 
| [0;m[38;5;43m20221213181119634 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213181119635 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213181119635 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213181119635 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213181119636 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213181119636 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213181119636 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:11:21.185399 run   osmo-stp_10.42.42.5(pid=15045): stdout: 
| (launched: 2022-12-13_18:11:19.441102)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:11:21.308752 run   osmo-stp_10.42.42.5(pid=15045): stderr: 
| [0;m[38;5;43m20221213181119634 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213181119635 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213181119635 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213181119635 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213181119636 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213181119636 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213181119636 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:11:21.454038 run              patchelf(pid=15048): Terminating (SIGINT)
18:11:21.626608 run              patchelf(pid=15048): Terminated: ok {rc=0}
18:11:21.658009 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=15045): Process ended prematurely: osmo-stp_10.42.42.5(pid=15045) [trial-2392↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15045)]  [trial-2392↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
18:11:21.666905 tst            switch_tch_pdch.py:54: Test FAILED (6.7 sec)
18:11:21.727437 run   osmo-hlr_10.42.42.2(pid=15042): ERR: Terminated: ERROR {rc=237}  [trial-2392↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15042)]
18:11:21.777289 run   osmo-hlr_10.42.42.2(pid=15042): stdout: 
| (launched: 2022-12-13_18:11:18.458603) 
18:11:21.827641 run   osmo-hlr_10.42.42.2(pid=15042): stderr: 
| [0;m[1;31m20221213181118655 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213181118656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213181118656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213181118656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213181118656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213181118656 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213181118668 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213181118677 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213181118677 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213181118677 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:11:21.870231 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15041): Terminating (SIGTERM)
18:11:21.911120 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15044): Terminating (SIGTERM)
18:11:21.951179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15047): Terminating (SIGTERM)
18:11:21.960463 ---      ParallelTerminationStrategy: PID 15041 died...
18:11:22.014223 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15041): Terminated: ok {rc=0}
18:11:22.023842 ---      ParallelTerminationStrategy: PID 15044 died...
18:11:22.077493 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15044): Terminated: ok {rc=0}
18:11:22.087159 ---      ParallelTerminationStrategy: PID 15047 died...
18:11:22.140741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15047): Terminated: ok {rc=0}
18:11:22.230285 bus                          /gobi_0: Setting Powered False
18:11:23.334709 bus                          /gobi_0: Setting Powered False
18:11:24.443621 bus                          /gobi_6: Setting Powered False
