
----------------------------------------------
trial-2392 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
18:23:33.027156 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.038986 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
18:23:33.178409 tst         cs_paging_gprs_active.py: using LAC 35421
18:23:33.297456 tst         cs_paging_gprs_active.py: using RAC 231
18:23:33.416911 tst         cs_paging_gprs_active.py: using CellId 35421
18:23:33.544794 tst         cs_paging_gprs_active.py: using BVCI 35422
18:23:33.570012 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.581873 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.593671 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.605356 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.617872 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.630570 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.643231 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.655648 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:23:33.668341 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
18:23:33.792801 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
18:23:34.076797 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
18:23:34.205703 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:23:34.527437 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16423): Launched
18:23:34.794395 run iperf3-srv_10.42.42.10(pid=16424): Launched
18:23:34.981666 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
18:23:35.109055 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:23:35.430312 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16425): Launched
18:23:35.697552 run iperf3-srv_10.42.42.10(pid=16426): Launched
18:23:35.884774 tst      cs_paging_gprs_active.py:38: start network...
18:23:36.012569 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:23:36.509021 run         create_hlr_db(pid=16427): Launched
18:23:36.700818 bus                          /gobi_6: Setting Powered False
18:23:37.721491 run         create_hlr_db(pid=16427): Terminated: ok {rc=0}
18:23:38.138886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16429): Launched
18:23:38.450076 run   osmo-hlr_10.42.42.2(pid=16430): Launched
18:23:38.564146 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:23:39.102492 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16432): Launched
18:23:39.412487 run   osmo-stp_10.42.42.5(pid=16433): Launched
18:23:39.527078 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:23:40.070381 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16435): Launched
18:23:40.180613 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:23:40.453936 run              patchelf(pid=16436): Launched
18:23:40.635271 run   osmo-stp_10.42.42.5(pid=16433): ERR: Terminated: ERROR {rc=1}  [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16433)]
18:23:40.767750 run   osmo-stp_10.42.42.5(pid=16433): stdout: 
| (launched: 2022-12-13_18:23:39.259485)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:23:40.900673 run   osmo-stp_10.42.42.5(pid=16433): stderr: 
| [0;m[38;5;43m20221213182339432 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213182339432 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213182339432 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213182339433 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213182339433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213182339433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213182339433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:23:41.028346 run   osmo-stp_10.42.42.5(pid=16433): stdout: 
| (launched: 2022-12-13_18:23:39.259485)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:23:41.154811 run   osmo-stp_10.42.42.5(pid=16433): stderr: 
| [0;m[38;5;43m20221213182339432 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213182339432 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213182339432 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213182339433 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213182339433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213182339433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213182339433 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:23:41.303685 run              patchelf(pid=16436): Terminating (SIGINT)
18:23:41.479740 run              patchelf(pid=16436): Terminated: ok {rc=0}
18:23:41.512570 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16433): Process ended prematurely: osmo-stp_10.42.42.5(pid=16433) [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16433)]  [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
18:23:41.522113 tst      cs_paging_gprs_active.py:38: Test FAILED (8.5 sec)
18:23:41.582780 run   osmo-hlr_10.42.42.2(pid=16430): ERR: Terminated: ERROR {rc=237}  [trial-2392↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16430)]
18:23:41.632598 run   osmo-hlr_10.42.42.2(pid=16430): stdout: 
| (launched: 2022-12-13_18:23:38.296468) 
18:23:41.683230 run   osmo-hlr_10.42.42.2(pid=16430): stderr: 
| [0;m[1;31m20221213182338471 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213182338471 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213182338471 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213182338471 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213182338472 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213182338472 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213182338486 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213182338497 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213182338497 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213182338497 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:23:41.726001 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16423): Terminating (SIGTERM)
18:23:41.766232 run iperf3-srv_10.42.42.10(pid=16424): Terminating (SIGTERM)
18:23:41.806557 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16425): Terminating (SIGTERM)
18:23:41.846916 run iperf3-srv_10.42.42.10(pid=16426): Terminating (SIGTERM)
18:23:41.887333 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16429): Terminating (SIGTERM)
18:23:41.927768 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16432): Terminating (SIGTERM)
18:23:41.968237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16435): Terminating (SIGTERM)
18:23:41.977583 ---      ParallelTerminationStrategy: PID 16423 died...
18:23:42.031653 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16423): Terminated: ok {rc=0}
18:23:42.041336 ---      ParallelTerminationStrategy: PID 16424 died...
18:23:42.094947 run iperf3-srv_10.42.42.10(pid=16424): Terminated {rc=256}
18:23:42.104429 ---      ParallelTerminationStrategy: PID 16425 died...
18:23:42.158200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16425): Terminated: ok {rc=0}
18:23:42.167765 ---      ParallelTerminationStrategy: PID 16426 died...
18:23:42.221260 run iperf3-srv_10.42.42.10(pid=16426): Terminated {rc=256}
18:23:42.230853 ---      ParallelTerminationStrategy: PID 16429 died...
18:23:42.284478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16429): Terminated: ok {rc=0}
18:23:42.294065 ---      ParallelTerminationStrategy: PID 16432 died...
18:23:42.348232 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16432): Terminated: ok {rc=0}
18:23:42.357870 ---      ParallelTerminationStrategy: PID 16435 died...
18:23:42.411752 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16435): Terminated: ok {rc=0}
18:23:42.502186 bus                          /gobi_0: Setting Powered False
18:23:43.608855 bus                          /gobi_0: Setting Powered False
18:23:44.717663 bus                          /gobi_6: Setting Powered False
