
----------------------------------------------
trial-2392 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
17:19:15.182530 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.194637 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
17:19:15.354305 tst                        iperf3.py: using LAC 35083
17:19:15.484167 tst                        iperf3.py: using RAC 148
17:19:15.618966 tst                        iperf3.py: using CellId 35083
17:19:15.749081 tst                        iperf3.py: using BVCI 35084
17:19:15.774677 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.786010 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.797251 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.808343 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.819737 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.832792 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.846578 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.859324 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:19:15.872065 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
17:19:16.207488 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
17:19:16.351147 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
17:19:16.717882 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9782): Launched
17:19:17.088147 run iperf3-srv_10.42.42.10(pid=9783): Launched
17:19:17.299561 tst                      iperf3.py:8: start network...
17:19:17.439628 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:19:17.964910 run          create_hlr_db(pid=9784): Launched
17:19:18.158068 bus                          /gobi_6: Setting Powered False
17:19:19.178476 run          create_hlr_db(pid=9784): Terminated: ok {rc=0}
17:19:19.623929 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9786): Launched
17:19:19.960654 run    osmo-hlr_10.42.42.2(pid=9787): Launched
17:19:20.084675 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:19:20.668264 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9789): Launched
17:19:21.005772 run    osmo-stp_10.42.42.5(pid=9790): Launched
17:19:21.127711 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:19:21.714378 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9792): Launched
17:19:21.833794 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:19:22.127455 run               patchelf(pid=9793): Launched
17:19:22.323194 run    osmo-stp_10.42.42.5(pid=9790): ERR: Terminated: ERROR {rc=1}  [trial-2392↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9790)]
17:19:22.465989 run    osmo-stp_10.42.42.5(pid=9790): stdout: 
| (launched: 2022-12-13_17:19:20.838804)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:19:22.609179 run    osmo-stp_10.42.42.5(pid=9790): stderr: 
| [0;m[38;5;43m20221213171921036 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213171921036 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213171921036 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213171921037 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213171921037 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213171921037 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213171921037 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:19:22.747756 run    osmo-stp_10.42.42.5(pid=9790): stdout: 
| (launched: 2022-12-13_17:19:20.838804)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:19:22.884753 run    osmo-stp_10.42.42.5(pid=9790): stderr: 
| [0;m[38;5;43m20221213171921036 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213171921036 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213171921036 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213171921037 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213171921037 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213171921037 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213171921037 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:19:23.045998 run               patchelf(pid=9793): Terminating (SIGINT)
17:19:23.235849 run               patchelf(pid=9793): Terminated: ok {rc=0}
17:19:23.270371 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9790): Process ended prematurely: osmo-stp_10.42.42.5(pid=9790) [trial-2392↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9790)]  [trial-2392↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
17:19:23.280328 tst                      iperf3.py:8: Test FAILED (8.1 sec)
17:19:23.344870 run    osmo-hlr_10.42.42.2(pid=9787): ERR: Terminated: ERROR {rc=237}  [trial-2392↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9787)]
17:19:23.397541 run    osmo-hlr_10.42.42.2(pid=9787): stdout: 
| (launched: 2022-12-13_17:19:19.794317) 
17:19:23.450949 run    osmo-hlr_10.42.42.2(pid=9787): stderr: 
| [0;m[1;31m20221213171919997 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213171919997 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213171919997 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213171919997 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213171919997 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213171919997 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213171920011 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213171920021 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213171920021 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213171920021 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:19:23.496423 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9782): Terminating (SIGTERM)
17:19:23.539269 run iperf3-srv_10.42.42.10(pid=9783): Terminating (SIGTERM)
17:19:23.582153 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9786): Terminating (SIGTERM)
17:19:23.624935 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9789): Terminating (SIGTERM)
17:19:23.667788 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9792): Terminating (SIGTERM)
17:19:23.677670 ---      ParallelTerminationStrategy: PID 9782 died...
17:19:23.735681 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9782): Terminated: ok {rc=0}
17:19:23.746122 ---      ParallelTerminationStrategy: PID 9783 died...
17:19:23.803344 run iperf3-srv_10.42.42.10(pid=9783): Terminated {rc=256}
17:19:23.813669 ---      ParallelTerminationStrategy: PID 9786 died...
17:19:23.870883 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9786): Terminated: ok {rc=0}
17:19:23.881199 ---      ParallelTerminationStrategy: PID 9789 died...
17:19:23.938533 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9789): Terminated: ok {rc=0}
17:19:23.948675 ---      ParallelTerminationStrategy: PID 9792 died...
17:19:24.005891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9792): Terminated: ok {rc=0}
17:19:24.095539 bus                          /gobi_6: Setting Powered False
