
----------------------------------------------
trial-2392 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
17:54:07.557760 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:07.570393 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
17:54:07.718986 tst         cs_paging_gprs_active.py: using LAC 35266
17:54:07.843470 tst         cs_paging_gprs_active.py: using RAC 76
17:54:07.966068 tst         cs_paging_gprs_active.py: using CellId 35266
17:54:08.089881 tst         cs_paging_gprs_active.py: using BVCI 35267
17:54:08.115137 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.127512 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.139722 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.152081 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.164454 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.176815 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.189458 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.201696 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
17:54:08.214246 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
17:54:08.339874 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
17:54:08.634948 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
17:54:08.768033 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
17:54:09.115555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13553): Launched
17:54:09.407589 run iperf3-srv_10.42.42.10(pid=13554): Launched
17:54:09.604418 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
17:54:09.739073 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
17:54:10.089510 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13555): Launched
17:54:10.382235 run iperf3-srv_10.42.42.10(pid=13556): Launched
17:54:10.576096 tst      cs_paging_gprs_active.py:38: start network...
17:54:10.712712 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:54:11.263072 run         create_hlr_db(pid=13557): Launched
17:54:11.449320 bus                          /gobi_6: Setting Powered False
17:54:12.462975 run         create_hlr_db(pid=13557): Terminated: ok {rc=0}
17:54:12.882793 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13559): Launched
17:54:13.193296 run   osmo-hlr_10.42.42.2(pid=13560): Launched
17:54:13.306477 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:54:13.843873 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13562): Launched
17:54:14.153123 run   osmo-stp_10.42.42.5(pid=13563): Launched
17:54:14.265939 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:54:14.807183 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13565): Launched
17:54:14.916818 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:54:15.187155 run              patchelf(pid=13566): Launched
17:54:15.368445 run   osmo-stp_10.42.42.5(pid=13563): ERR: Terminated: ERROR {rc=1}  [trial-2392↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13563)]
17:54:15.501682 run   osmo-stp_10.42.42.5(pid=13563): stdout: 
| (launched: 2022-12-13_17:54:14.000655)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:54:15.634562 run   osmo-stp_10.42.42.5(pid=13563): stderr: 
| [0;m[38;5;43m20221213175414170 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213175414170 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213175414171 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213175414171 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213175414171 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213175414172 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213175414172 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:54:15.762036 run   osmo-stp_10.42.42.5(pid=13563): stdout: 
| (launched: 2022-12-13_17:54:14.000655)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:54:15.896631 run   osmo-stp_10.42.42.5(pid=13563): stderr: 
| [0;m[38;5;43m20221213175414170 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213175414170 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213175414171 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213175414171 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213175414171 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213175414172 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213175414172 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:54:16.048889 run              patchelf(pid=13566): Terminating (SIGINT)
17:54:16.283515 run              patchelf(pid=13566): Terminated: ok {rc=0}
17:54:16.320439 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13563): Process ended prematurely: osmo-stp_10.42.42.5(pid=13563) [trial-2392↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13563)]  [trial-2392↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
17:54:16.331734 tst      cs_paging_gprs_active.py:38: Test FAILED (8.8 sec)
17:54:16.400573 run   osmo-hlr_10.42.42.2(pid=13560): ERR: Terminated: ERROR {rc=237}  [trial-2392↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13560)]
17:54:16.457270 run   osmo-hlr_10.42.42.2(pid=13560): stdout: 
| (launched: 2022-12-13_17:54:13.040568) 
17:54:16.513791 run   osmo-hlr_10.42.42.2(pid=13560): stderr: 
| [0;m[1;31m20221213175413219 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213175413219 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213175413219 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213175413219 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213175413219 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213175413219 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213175413235 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213175413246 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213175413246 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213175413246 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:54:16.562546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13553): Terminating (SIGTERM)
17:54:16.608331 run iperf3-srv_10.42.42.10(pid=13554): Terminating (SIGTERM)
17:54:16.655286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13555): Terminating (SIGTERM)
17:54:16.701411 run iperf3-srv_10.42.42.10(pid=13556): Terminating (SIGTERM)
17:54:16.747378 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13559): Terminating (SIGTERM)
17:54:16.794762 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13562): Terminating (SIGTERM)
17:54:16.843286 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13565): Terminating (SIGTERM)
17:54:16.854255 ---      ParallelTerminationStrategy: PID 13553 died...
17:54:16.916641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13553): Terminated: ok {rc=0}
17:54:16.929207 ---      ParallelTerminationStrategy: PID 13554 died...
17:54:16.988841 run iperf3-srv_10.42.42.10(pid=13554): Terminated {rc=256}
17:54:17.000777 ---      ParallelTerminationStrategy: PID 13555 died...
17:54:17.061955 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13555): Terminated: ok {rc=0}
17:54:17.073123 ---      ParallelTerminationStrategy: PID 13556 died...
17:54:17.133473 run iperf3-srv_10.42.42.10(pid=13556): Terminated {rc=256}
17:54:17.144552 ---      ParallelTerminationStrategy: PID 13559 died...
17:54:17.205331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13559): Terminated: ok {rc=0}
17:54:17.217494 ---      ParallelTerminationStrategy: PID 13562 died...
17:54:17.278357 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13562): Terminated: ok {rc=0}
17:54:17.288816 ---      ParallelTerminationStrategy: PID 13565 died...
17:54:17.347630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13565): Terminated: ok {rc=0}
17:54:17.436130 bus                          /gobi_0: Setting Powered False
17:54:18.539798 bus                          /gobi_0: Setting Powered False
17:54:19.653085 bus                          /gobi_6: Setting Powered False
