
----------------------------------------------
trial-2393 gprs:sysmo+mod-bts0-egprs iperf3m4.py
----------------------------------------------
18:45:47.722656 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:47.734261 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
18:45:47.859353 tst                      iperf3m4.py: using LAC 35535
18:45:47.980791 tst                      iperf3m4.py: using RAC 90
18:45:48.110071 tst                      iperf3m4.py: using CellId 35535
18:45:48.238221 tst                      iperf3m4.py: using BVCI 35536
18:45:48.263532 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.274996 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.286234 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.297414 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.308814 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.320175 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.331908 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.343204 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:45:48.355014 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
18:45:48.473429 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
18:45:48.594154 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
18:45:48.710513 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
18:45:48.990915 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
18:45:49.118266 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:45:49.437139 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18779): Launched
18:45:49.700815 run iperf3-srv_10.42.42.10(pid=18780): Launched
18:45:49.886850 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
18:45:50.013346 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:45:50.332204 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18781): Launched
18:45:50.594812 run iperf3-srv_10.42.42.10(pid=18782): Launched
18:45:50.780426 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
18:45:50.907433 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:45:51.224363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18783): Launched
18:45:51.487024 run iperf3-srv_10.42.42.10(pid=18784): Launched
18:45:51.672684 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
18:45:51.800217 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:45:52.140224 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18788): Launched
18:45:52.425037 run iperf3-srv_10.42.42.10(pid=18789): Launched
18:45:52.626755 tst                    iperf3m4.py:8: start network...
18:45:52.764345 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:45:53.280424 run         create_hlr_db(pid=18790): Launched
18:45:53.471037 bus                          /gobi_6: Setting Powered False
18:45:54.492092 run         create_hlr_db(pid=18790): Terminated: ok {rc=0}
18:45:54.900673 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18792): Launched
18:45:55.205273 run   osmo-hlr_10.42.42.2(pid=18793): Launched
18:45:55.317306 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:45:55.846126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18795): Launched
18:45:56.152252 run   osmo-stp_10.42.42.5(pid=18796): Launched
18:45:56.264003 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:45:56.796654 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18798): Launched
18:45:56.904793 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:45:57.170025 run              patchelf(pid=18799): Launched
18:45:57.347586 run   osmo-stp_10.42.42.5(pid=18796): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18796)]
18:45:57.477254 run   osmo-stp_10.42.42.5(pid=18796): stdout: 
| (launched: 2022-12-13_18:45:56.001252)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:45:57.606937 run   osmo-stp_10.42.42.5(pid=18796): stderr: 
| [0;m[38;5;43m20221213184556168 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213184556168 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213184556168 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213184556169 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184556169 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184556169 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184556169 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:45:57.732505 run   osmo-stp_10.42.42.5(pid=18796): stdout: 
| (launched: 2022-12-13_18:45:56.001252)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:45:57.856844 run   osmo-stp_10.42.42.5(pid=18796): stderr: 
| [0;m[38;5;43m20221213184556168 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213184556168 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213184556168 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213184556169 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184556169 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184556169 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184556169 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:45:58.002146 run              patchelf(pid=18799): Terminating (SIGINT)
18:45:58.172807 run              patchelf(pid=18799): Terminated: ok {rc=0}
18:45:58.204065 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18796): Process ended prematurely: osmo-stp_10.42.42.5(pid=18796) [trial-2393↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18796)]  [trial-2393↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py:8]
18:45:58.213266 tst                    iperf3m4.py:8: Test FAILED (10.5 sec)
18:45:58.274044 run   osmo-hlr_10.42.42.2(pid=18793): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:sysmo+mod-bts0-egprs↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18793)]
18:45:58.323181 run   osmo-hlr_10.42.42.2(pid=18793): stdout: 
| (launched: 2022-12-13_18:45:55.055871) 
18:45:58.373072 run   osmo-hlr_10.42.42.2(pid=18793): stderr: 
| [0;m[1;31m20221213184555231 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213184555231 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213184555231 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213184555231 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213184555231 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213184555231 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213184555243 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-egprs/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213184555255 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213184555255 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213184555255 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:45:58.415175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18779): Terminating (SIGTERM)
18:45:58.454646 run iperf3-srv_10.42.42.10(pid=18780): Terminating (SIGTERM)
18:45:58.494175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18781): Terminating (SIGTERM)
18:45:58.533572 run iperf3-srv_10.42.42.10(pid=18782): Terminating (SIGTERM)
18:45:58.573071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18783): Terminating (SIGTERM)
18:45:58.612407 run iperf3-srv_10.42.42.10(pid=18784): Terminating (SIGTERM)
18:45:58.651935 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18788): Terminating (SIGTERM)
18:45:58.691165 run iperf3-srv_10.42.42.10(pid=18789): Terminating (SIGTERM)
18:45:58.730674 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18792): Terminating (SIGTERM)
18:45:58.770149 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18795): Terminating (SIGTERM)
18:45:58.809954 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18798): Terminating (SIGTERM)
18:45:58.819100 ---      ParallelTerminationStrategy: PID 18779 died...
18:45:58.872480 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18779): Terminated: ok {rc=0}
18:45:58.882157 ---      ParallelTerminationStrategy: PID 18780 died...
18:45:58.935301 run iperf3-srv_10.42.42.10(pid=18780): Terminated {rc=256}
18:45:58.944755 ---      ParallelTerminationStrategy: PID 18781 died...
18:45:58.997941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18781): Terminated: ok {rc=0}
18:45:59.007492 ---      ParallelTerminationStrategy: PID 18782 died...
18:45:59.060558 run iperf3-srv_10.42.42.10(pid=18782): Terminated {rc=256}
18:45:59.070052 ---      ParallelTerminationStrategy: PID 18783 died...
18:45:59.123465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18783): Terminated: ok {rc=0}
18:45:59.133173 ---      ParallelTerminationStrategy: PID 18784 died...
18:45:59.186241 run iperf3-srv_10.42.42.10(pid=18784): Terminated {rc=256}
18:45:59.195757 ---      ParallelTerminationStrategy: PID 18788 died...
18:45:59.249031 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18788): Terminated: ok {rc=0}
18:45:59.258645 ---      ParallelTerminationStrategy: PID 18789 died...
18:45:59.311953 run iperf3-srv_10.42.42.10(pid=18789): Terminated {rc=256}
18:45:59.321606 ---      ParallelTerminationStrategy: PID 18792 died...
18:45:59.374434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18792): Terminated: ok {rc=0}
18:45:59.384080 ---      ParallelTerminationStrategy: PID 18795 died...
18:45:59.437144 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18795): Terminated: ok {rc=0}
18:45:59.446798 ---      ParallelTerminationStrategy: PID 18798 died...
18:45:59.500261 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18798): Terminated: ok {rc=0}
18:45:59.589441 bus                          /gobi_4: Setting Powered False
18:46:00.694494 bus                          /gobi_4: Setting Powered False
18:46:01.802718 bus                          /gobi_1: Setting Powered False
18:46:02.905860 bus                          /gobi_1: Setting Powered False
18:46:04.017633 bus                          /gobi_0: Setting Powered False
18:46:05.121522 bus                          /gobi_0: Setting Powered False
18:46:06.231823 bus                          /gobi_6: Setting Powered False
