
----------------------------------------------
trial-2393 gprs:sysmo+mod-bts0-egprs ping.py
----------------------------------------------
18:46:07.299051 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.310493 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
18:46:07.441238 tst                          ping.py: using LAC 35536
18:46:07.567060 tst                          ping.py: using RAC 91
18:46:07.694472 tst                          ping.py: using CellId 35536
18:46:07.820814 tst                          ping.py: using BVCI 35537
18:46:07.845686 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.857279 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.868408 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.879643 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.891193 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.902781 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.914593 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:46:07.926366 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
18:46:08.204333 tst                       ping.py:19: start network...
18:46:08.329576 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:46:08.811464 run         create_hlr_db(pid=18800): Launched
18:46:08.984064 bus                          /gobi_6: Setting Powered False
18:46:10.005769 run         create_hlr_db(pid=18800): Terminated: ok {rc=0}
18:46:10.435324 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18802): Launched
18:46:10.757622 run   osmo-hlr_10.42.42.2(pid=18803): Launched
18:46:10.878979 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:46:11.438060 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18805): Launched
18:46:11.762290 run   osmo-stp_10.42.42.5(pid=18806): Launched
18:46:11.879438 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:46:12.443699 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18808): Launched
18:46:12.558833 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:46:12.840374 run              patchelf(pid=18809): Launched
18:46:13.029647 run   osmo-stp_10.42.42.5(pid=18806): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18806)]
18:46:13.167562 run   osmo-stp_10.42.42.5(pid=18806): stdout: 
| (launched: 2022-12-13_18:46:11.601984)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:46:13.306505 run   osmo-stp_10.42.42.5(pid=18806): stderr: 
| [0;m[38;5;43m20221213184611790 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213184611791 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213184611791 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213184611791 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184611792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184611792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184611792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:46:13.440662 run   osmo-stp_10.42.42.5(pid=18806): stdout: 
| (launched: 2022-12-13_18:46:11.601984)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:46:13.573384 run   osmo-stp_10.42.42.5(pid=18806): stderr: 
| [0;m[38;5;43m20221213184611790 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213184611791 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213184611791 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213184611791 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184611792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184611792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184611792 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:46:13.727039 run              patchelf(pid=18809): Terminating (SIGINT)
18:46:13.906851 run              patchelf(pid=18809): Terminated: ok {rc=0}
18:46:13.939645 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18806): Process ended prematurely: osmo-stp_10.42.42.5(pid=18806) [trial-2393↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18806)]  [trial-2393↪gprs:sysmo+mod-bts0-egprs↪ping.py:22]
18:46:13.949262 tst                       ping.py:22: Test FAILED (6.6 sec)
18:46:14.012711 run   osmo-hlr_10.42.42.2(pid=18803): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:sysmo+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18803)]
18:46:14.064716 run   osmo-hlr_10.42.42.2(pid=18803): stdout: 
| (launched: 2022-12-13_18:46:10.599303) 
18:46:14.117255 run   osmo-hlr_10.42.42.2(pid=18803): stderr: 
| [0;m[1;31m20221213184610795 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213184610795 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213184610795 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213184610795 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213184610795 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213184610795 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213184610807 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213184610816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213184610816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213184610816 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:46:14.162216 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18802): Terminating (SIGTERM)
18:46:14.204853 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18805): Terminating (SIGTERM)
18:46:14.247215 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18808): Terminating (SIGTERM)
18:46:14.257036 ---      ParallelTerminationStrategy: PID 18802 died...
18:46:14.314234 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18802): Terminated: ok {rc=0}
18:46:14.324444 ---      ParallelTerminationStrategy: PID 18805 died...
18:46:14.381030 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18805): Terminated: ok {rc=0}
18:46:14.391214 ---      ParallelTerminationStrategy: PID 18808 died...
18:46:14.447829 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18808): Terminated: ok {rc=0}
18:46:14.535481 bus                          /gobi_6: Setting Powered False
