
----------------------------------------------
trial-2394 gprs:nanobts+band-900 ping.py
----------------------------------------------
21:16:44.512919 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:44.524287 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
21:16:44.666245 tst                          ping.py: using LAC 36331
21:16:44.792204 tst                          ping.py: using RAC 121
21:16:44.922357 tst                          ping.py: using CellId 36331
21:16:45.046001 tst                          ping.py: using BVCI 36332
21:16:45.070731 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:45.082195 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:45.093434 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:45.104477 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:45.115500 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:45.126519 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:45.137735 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
21:16:45.148711 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
21:16:45.441332 tst                       ping.py:19: start network...
21:16:45.575363 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:16:46.113859 run          create_hlr_db(pid=1002): Launched
21:16:46.292554 bus                          /gobi_6: Setting Powered False
21:16:47.342752 run          create_hlr_db(pid=1002): Terminated: ok {rc=0}
21:16:47.745882 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1004): Launched
21:16:48.048602 run    osmo-hlr_10.42.42.2(pid=1005): Launched
21:16:48.161690 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:16:48.685401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1007): Launched
21:16:48.985238 run    osmo-stp_10.42.42.5(pid=1008): Launched
21:16:49.094151 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:16:49.616931 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1010): Launched
21:16:49.723503 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:16:49.986492 run               patchelf(pid=1011): Launched
21:16:50.162142 run    osmo-stp_10.42.42.5(pid=1008): ERR: Terminated: ERROR {rc=1}  [trial-2394↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1008)]
21:16:50.290830 run    osmo-stp_10.42.42.5(pid=1008): stdout: 
| (launched: 2022-12-13_21:16:48.836760)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:16:50.419474 run    osmo-stp_10.42.42.5(pid=1008): stderr: 
| [0;m[38;5;43m20221213211649004 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213211649004 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213211649004 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213211649005 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213211649005 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213211649005 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213211649006 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:16:50.543922 run    osmo-stp_10.42.42.5(pid=1008): stdout: 
| (launched: 2022-12-13_21:16:48.836760)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:16:50.667528 run    osmo-stp_10.42.42.5(pid=1008): stderr: 
| [0;m[38;5;43m20221213211649004 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213211649004 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213211649004 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213211649005 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213211649005 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213211649005 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213211649006 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:16:50.811207 run               patchelf(pid=1011): Terminating (SIGINT)
21:16:50.980610 run               patchelf(pid=1011): Terminated: ok {rc=0}
21:16:51.011274 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1008): Process ended prematurely: osmo-stp_10.42.42.5(pid=1008) [trial-2394↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1008)]  [trial-2394↪gprs:nanobts+band-900↪ping.py:22]
21:16:51.019819 tst                       ping.py:22: Test FAILED (6.5 sec)
21:16:51.080763 run    osmo-hlr_10.42.42.2(pid=1005): ERR: Terminated: ERROR {rc=237}  [trial-2394↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1005)]
21:16:51.130543 run    osmo-hlr_10.42.42.2(pid=1005): stdout: 
| (launched: 2022-12-13_21:16:47.898160) 
21:16:51.180921 run    osmo-hlr_10.42.42.2(pid=1005): stderr: 
| [0;m[1;31m20221213211648070 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213211648070 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213211648070 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213211648070 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213211648070 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213211648070 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213211648082 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213211648090 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213211648090 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213211648090 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:16:51.223957 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1004): Terminating (SIGTERM)
21:16:51.264404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1007): Terminating (SIGTERM)
21:16:51.304808 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1010): Terminating (SIGTERM)
21:16:51.314242 ---      ParallelTerminationStrategy: PID 1004 died...
21:16:51.368760 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1004): Terminated: ok {rc=0}
21:16:51.378595 ---      ParallelTerminationStrategy: PID 1007 died...
21:16:51.433091 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1007): Terminated: ok {rc=0}
21:16:51.442823 ---      ParallelTerminationStrategy: PID 1010 died...
21:16:51.496875 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1010): Terminated: ok {rc=0}
21:16:51.581322 bus                          /gobi_6: Setting Powered False
