
----------------------------------------------
trial-2394 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
20:49:51.378427 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:51.390067 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
20:49:51.536367 tst         cs_paging_gprs_active.py: using LAC 36188
20:49:51.664935 tst         cs_paging_gprs_active.py: using RAC 233
20:49:51.793850 tst         cs_paging_gprs_active.py: using CellId 36188
20:49:51.920612 tst         cs_paging_gprs_active.py: using BVCI 36189
20:49:51.945712 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:51.957749 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:51.969344 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:51.980881 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:51.992473 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:52.004132 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:52.015945 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:52.027649 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
20:49:52.039640 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
20:49:52.158422 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
20:49:52.454581 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
20:49:52.589470 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:49:52.922068 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29916): Launched
20:49:53.200631 run iperf3-srv_10.42.42.10(pid=29917): Launched
20:49:53.398979 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
20:49:53.534114 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
20:49:53.869250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29918): Launched
20:49:54.149274 run iperf3-srv_10.42.42.10(pid=29919): Launched
20:49:54.347600 tst      cs_paging_gprs_active.py:38: start network...
20:49:54.482502 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:49:55.000866 run         create_hlr_db(pid=29920): Launched
20:49:55.188317 bus                          /gobi_6: Setting Powered False
20:49:56.209808 run         create_hlr_db(pid=29920): Terminated: ok {rc=0}
20:49:56.617253 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29922): Launched
20:49:56.921697 run   osmo-hlr_10.42.42.2(pid=29923): Launched
20:49:57.043378 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:49:57.576709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29925): Launched
20:49:57.882900 run   osmo-stp_10.42.42.5(pid=29926): Launched
20:49:57.993276 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:49:58.522055 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29928): Launched
20:49:58.630402 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:49:58.903272 run              patchelf(pid=29929): Launched
20:49:59.092296 run   osmo-stp_10.42.42.5(pid=29926): ERR: Terminated: ERROR {rc=1}  [trial-2394↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29926)]
20:49:59.230645 run   osmo-stp_10.42.42.5(pid=29926): stdout: 
| (launched: 2022-12-13_20:49:57.730942)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:49:59.368766 run   osmo-stp_10.42.42.5(pid=29926): stderr: 
| [0;m[38;5;43m20221213204957898 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213204957898 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213204957898 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213204957899 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213204957900 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213204957900 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213204957900 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:49:59.502788 run   osmo-stp_10.42.42.5(pid=29926): stdout: 
| (launched: 2022-12-13_20:49:57.730942)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:49:59.635663 run   osmo-stp_10.42.42.5(pid=29926): stderr: 
| [0;m[38;5;43m20221213204957898 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213204957898 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213204957898 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213204957899 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213204957900 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213204957900 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213204957900 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:49:59.790729 run              patchelf(pid=29929): Terminating (SIGINT)
20:49:59.973591 run              patchelf(pid=29929): Terminated: ok {rc=0}
20:50:00.007222 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29926): Process ended prematurely: osmo-stp_10.42.42.5(pid=29926) [trial-2394↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29926)]  [trial-2394↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
20:50:00.017313 tst      cs_paging_gprs_active.py:38: Test FAILED (8.7 sec)
20:50:00.079802 run   osmo-hlr_10.42.42.2(pid=29923): ERR: Terminated: ERROR {rc=237}  [trial-2394↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29923)]
20:50:00.130856 run   osmo-hlr_10.42.42.2(pid=29923): stdout: 
| (launched: 2022-12-13_20:49:56.772211) 
20:50:00.182868 run   osmo-hlr_10.42.42.2(pid=29923): stderr: 
| [0;m[1;31m20221213204956945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213204956945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213204956945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213204956945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213204956945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213204956945 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213204956958 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213204956967 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213204956967 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213204956967 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:50:00.227116 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29916): Terminating (SIGTERM)
20:50:00.268763 run iperf3-srv_10.42.42.10(pid=29917): Terminating (SIGTERM)
20:50:00.310547 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29918): Terminating (SIGTERM)
20:50:00.352279 run iperf3-srv_10.42.42.10(pid=29919): Terminating (SIGTERM)
20:50:00.394574 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29922): Terminating (SIGTERM)
20:50:00.436363 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29925): Terminating (SIGTERM)
20:50:00.478303 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29928): Terminating (SIGTERM)
20:50:00.487912 ---      ParallelTerminationStrategy: PID 29916 died...
20:50:00.543711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29916): Terminated: ok {rc=0}
20:50:00.553732 ---      ParallelTerminationStrategy: PID 29917 died...
20:50:00.608903 run iperf3-srv_10.42.42.10(pid=29917): Terminated {rc=256}
20:50:00.618853 ---      ParallelTerminationStrategy: PID 29918 died...
20:50:00.673971 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29918): Terminated: ok {rc=0}
20:50:00.683871 ---      ParallelTerminationStrategy: PID 29919 died...
20:50:00.739194 run iperf3-srv_10.42.42.10(pid=29919): Terminated {rc=256}
20:50:00.749198 ---      ParallelTerminationStrategy: PID 29922 died...
20:50:00.804538 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29922): Terminated: ok {rc=0}
20:50:00.814543 ---      ParallelTerminationStrategy: PID 29925 died...
20:50:00.879643 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29925): Terminated: ok {rc=0}
20:50:00.894062 ---      ParallelTerminationStrategy: PID 29928 died...
20:50:00.950527 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29928): Terminated: ok {rc=0}
20:50:01.049518 bus                          /gobi_0: Setting Powered False
20:50:02.174806 bus                          /gobi_0: Setting Powered False
20:50:03.286456 bus                          /gobi_6: Setting Powered False
