
----------------------------------------------
trial-2397 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
01:45:35.949961 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:35.961860 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
01:45:36.090967 tst                ping_idle_ping.py: using LAC 37687
01:45:36.209194 tst                ping_idle_ping.py: using RAC 202
01:45:36.326531 tst                ping_idle_ping.py: using CellId 37687
01:45:36.448262 tst                ping_idle_ping.py: using BVCI 37688
01:45:36.470995 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:36.482150 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:36.492873 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:36.503593 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:36.514524 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:36.525969 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:36.537204 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
01:45:36.548266 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
01:45:36.838470 tst             ping_idle_ping.py:24: start network...
01:45:36.971908 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:45:37.481497 run         create_hlr_db(pid=25529): Launched
01:45:37.667467 bus                          /gobi_6: Setting Powered False
01:45:38.688381 run         create_hlr_db(pid=25529): Terminated: ok {rc=0}
01:45:39.091873 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25531): Launched
01:45:39.391245 run   osmo-hlr_10.42.42.2(pid=25532): Launched
01:45:39.500117 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:45:40.027978 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25534): Launched
01:45:40.350370 run   osmo-stp_10.42.42.5(pid=25535): Launched
01:45:40.466325 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:45:41.024822 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25537): Launched
01:45:41.138869 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:45:41.418365 run              patchelf(pid=25538): Launched
01:45:41.604794 run   osmo-stp_10.42.42.5(pid=25535): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25535)]
01:45:41.741419 run   osmo-stp_10.42.42.5(pid=25535): stdout: 
| (launched: 2022-12-14_01:45:40.190681)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:45:41.878821 run   osmo-stp_10.42.42.5(pid=25535): stderr: 
| [0;m[38;5;43m20221214014540381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214014540381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214014540381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214014540382 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214014540382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214014540382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214014540382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:45:42.011118 run   osmo-stp_10.42.42.5(pid=25535): stdout: 
| (launched: 2022-12-14_01:45:40.190681)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:45:42.142021 run   osmo-stp_10.42.42.5(pid=25535): stderr: 
| [0;m[38;5;43m20221214014540381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214014540381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214014540381 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214014540382 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214014540382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214014540382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214014540382 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:45:42.294340 run              patchelf(pid=25538): Terminating (SIGINT)
01:45:42.472782 run              patchelf(pid=25538): Terminated: ok {rc=0}
01:45:42.505224 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=25535): Process ended prematurely: osmo-stp_10.42.42.5(pid=25535) [trial-2397↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25535)]  [trial-2397↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
01:45:42.514681 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
01:45:42.577264 run   osmo-hlr_10.42.42.2(pid=25532): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25532)]
01:45:42.627979 run   osmo-hlr_10.42.42.2(pid=25532): stdout: 
| (launched: 2022-12-14_01:45:39.243244) 
01:45:42.679926 run   osmo-hlr_10.42.42.2(pid=25532): stderr: 
| [0;m[1;31m20221214014539416 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214014539416 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214014539416 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214014539417 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214014539417 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214014539417 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214014539429 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214014539439 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214014539439 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214014539439 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:45:42.723945 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25531): Terminating (SIGTERM)
01:45:42.765585 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25534): Terminating (SIGTERM)
01:45:42.807193 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25537): Terminating (SIGTERM)
01:45:42.816768 ---      ParallelTerminationStrategy: PID 25531 died...
01:45:42.872736 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25531): Terminated: ok {rc=0}
01:45:42.882769 ---      ParallelTerminationStrategy: PID 25534 died...
01:45:42.938427 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25534): Terminated: ok {rc=0}
01:45:42.948310 ---      ParallelTerminationStrategy: PID 25537 died...
01:45:43.003727 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25537): Terminated: ok {rc=0}
01:45:43.089868 bus                          /gobi_6: Setting Powered False
