
----------------------------------------------
trial-2397 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
01:52:56.758862 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:56.770262 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
01:52:56.911217 tst         cs_paging_gprs_active.py: using LAC 37726
01:52:57.027099 tst         cs_paging_gprs_active.py: using RAC 241
01:52:57.143670 tst         cs_paging_gprs_active.py: using CellId 37726
01:52:57.261869 tst         cs_paging_gprs_active.py: using BVCI 37727
01:52:57.285183 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.296708 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.308138 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.319413 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.330592 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.341822 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.353291 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.364432 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
01:52:57.375969 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
01:52:57.497094 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
01:52:57.790318 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
01:52:57.925490 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:52:58.261139 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26046): Launched
01:52:58.538182 run iperf3-srv_10.42.42.10(pid=26047): Launched
01:52:58.735572 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
01:52:58.869770 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:52:59.205962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26048): Launched
01:52:59.483442 run iperf3-srv_10.42.42.10(pid=26049): Launched
01:52:59.682649 tst      cs_paging_gprs_active.py:38: start network...
01:52:59.817723 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:53:00.335133 run         create_hlr_db(pid=26050): Launched
01:53:00.509697 bus                          /gobi_6: Setting Powered False
01:53:01.573343 run         create_hlr_db(pid=26050): Terminated: ok {rc=0}
01:53:02.036609 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26052): Launched
01:53:02.367668 run   osmo-hlr_10.42.42.2(pid=26053): Launched
01:53:02.487917 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:53:03.052344 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26055): Launched
01:53:03.374244 run   osmo-stp_10.42.42.5(pid=26056): Launched
01:53:03.495794 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:53:04.058222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26058): Launched
01:53:04.173930 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:53:04.455921 run              patchelf(pid=26059): Launched
01:53:04.644690 run   osmo-stp_10.42.42.5(pid=26056): ERR: Terminated: ERROR {rc=1}  [trial-2397↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26056)]
01:53:04.782763 run   osmo-stp_10.42.42.5(pid=26056): stdout: 
| (launched: 2022-12-14_01:53:03.216882)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:53:04.921359 run   osmo-stp_10.42.42.5(pid=26056): stderr: 
| [0;m[38;5;43m20221214015303405 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214015303406 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214015303406 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214015303406 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214015303407 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214015303407 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214015303407 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:53:05.055003 run   osmo-stp_10.42.42.5(pid=26056): stdout: 
| (launched: 2022-12-14_01:53:03.216882)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:53:05.188238 run   osmo-stp_10.42.42.5(pid=26056): stderr: 
| [0;m[38;5;43m20221214015303405 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214015303406 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214015303406 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214015303406 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214015303407 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214015303407 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214015303407 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:53:05.342797 run              patchelf(pid=26059): Terminating (SIGINT)
01:53:05.523974 run              patchelf(pid=26059): Terminated: ok {rc=0}
01:53:05.557604 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26056): Process ended prematurely: osmo-stp_10.42.42.5(pid=26056) [trial-2397↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26056)]  [trial-2397↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
01:53:05.567625 tst      cs_paging_gprs_active.py:38: Test FAILED (8.8 sec)
01:53:05.630745 run   osmo-hlr_10.42.42.2(pid=26053): ERR: Terminated: ERROR {rc=237}  [trial-2397↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26053)]
01:53:05.682255 run   osmo-hlr_10.42.42.2(pid=26053): stdout: 
| (launched: 2022-12-14_01:53:02.207962) 
01:53:05.734184 run   osmo-hlr_10.42.42.2(pid=26053): stderr: 
| [0;m[1;31m20221214015302406 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214015302406 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214015302406 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214015302406 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214015302406 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214015302406 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214015302419 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214015302427 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214015302427 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214015302427 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:53:05.778504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26046): Terminating (SIGTERM)
01:53:05.819954 run iperf3-srv_10.42.42.10(pid=26047): Terminating (SIGTERM)
01:53:05.861574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26048): Terminating (SIGTERM)
01:53:05.903588 run iperf3-srv_10.42.42.10(pid=26049): Terminating (SIGTERM)
01:53:05.946000 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26052): Terminating (SIGTERM)
01:53:05.987987 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26055): Terminating (SIGTERM)
01:53:06.029714 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26058): Terminating (SIGTERM)
01:53:06.039154 ---      ParallelTerminationStrategy: PID 26046 died...
01:53:06.095227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26046): Terminated: ok {rc=0}
01:53:06.105115 ---      ParallelTerminationStrategy: PID 26047 died...
01:53:06.161076 run iperf3-srv_10.42.42.10(pid=26047): Terminated {rc=256}
01:53:06.170933 ---      ParallelTerminationStrategy: PID 26048 died...
01:53:06.226867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26048): Terminated: ok {rc=0}
01:53:06.236714 ---      ParallelTerminationStrategy: PID 26049 died...
01:53:06.292669 run iperf3-srv_10.42.42.10(pid=26049): Terminated {rc=256}
01:53:06.302580 ---      ParallelTerminationStrategy: PID 26052 died...
01:53:06.358511 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26052): Terminated: ok {rc=0}
01:53:06.368415 ---      ParallelTerminationStrategy: PID 26055 died...
01:53:06.424216 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26055): Terminated: ok {rc=0}
01:53:06.434158 ---      ParallelTerminationStrategy: PID 26058 died...
01:53:06.490426 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26058): Terminated: ok {rc=0}
01:53:06.576364 bus                          /gobi_0: Setting Powered False
01:53:07.681692 bus                          /gobi_0: Setting Powered False
01:53:08.788418 bus                          /gobi_6: Setting Powered False
