
----------------------------------------------
trial-2398 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
03:07:49.160368 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.172030 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
03:07:49.329298 tst               switch_tch_pdch.py: using LAC 38122
03:07:49.452135 tst               switch_tch_pdch.py: using RAC 127
03:07:49.574532 tst               switch_tch_pdch.py: using CellId 38122
03:07:49.696667 tst               switch_tch_pdch.py: using BVCI 38123
03:07:49.721085 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.732577 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.743874 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.755327 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.767145 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.778918 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.791104 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
03:07:49.803035 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
03:07:49.917756 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
03:07:50.206634 tst            switch_tch_pdch.py:51: start network...
03:07:50.339014 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:07:50.805664 run          create_hlr_db(pid=1072): Launched
03:07:50.934831 bus                          /gobi_6: Setting Powered False
03:07:52.027044 run          create_hlr_db(pid=1072): Terminated: ok {rc=0}
03:07:52.420358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1074): Launched
03:07:52.736332 run    osmo-hlr_10.42.42.2(pid=1075): Launched
03:07:52.851478 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:07:53.372261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1077): Launched
03:07:53.687098 run    osmo-stp_10.42.42.5(pid=1078): Launched
03:07:53.802164 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:07:54.322626 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1080): Launched
03:07:54.427123 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:07:54.683339 run               patchelf(pid=1081): Launched
03:07:54.855415 run    osmo-stp_10.42.42.5(pid=1078): ERR: Terminated: ERROR {rc=1}  [trial-2398↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1078)]
03:07:54.981192 run    osmo-stp_10.42.42.5(pid=1078): stdout: 
| (launched: 2022-12-14_03:07:53.532214)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:07:55.107012 run    osmo-stp_10.42.42.5(pid=1078): stderr: 
| [0;m[38;5;43m20221214030753722 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214030753722 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214030753722 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214030753723 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214030753725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214030753725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214030753725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:07:55.229530 run    osmo-stp_10.42.42.5(pid=1078): stdout: 
| (launched: 2022-12-14_03:07:53.532214)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:07:55.350650 run    osmo-stp_10.42.42.5(pid=1078): stderr: 
| [0;m[38;5;43m20221214030753722 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214030753722 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214030753722 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214030753723 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214030753725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214030753725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214030753725 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:07:55.491465 run               patchelf(pid=1081): Terminating (SIGINT)
03:07:55.658142 run               patchelf(pid=1081): Terminated: ok {rc=0}
03:07:55.688467 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=1078): Process ended prematurely: osmo-stp_10.42.42.5(pid=1078) [trial-2398↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1078)]  [trial-2398↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
03:07:55.697069 tst            switch_tch_pdch.py:54: Test FAILED (6.5 sec)
03:07:55.756328 run    osmo-hlr_10.42.42.2(pid=1075): ERR: Terminated: ERROR {rc=237}  [trial-2398↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1075)]
03:07:55.805387 run    osmo-hlr_10.42.42.2(pid=1075): stdout: 
| (launched: 2022-12-14_03:07:52.581178) 
03:07:55.854958 run    osmo-hlr_10.42.42.2(pid=1075): stderr: 
| [0;m[1;31m20221214030752779 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214030752779 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214030752779 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214030752779 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214030752779 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214030752779 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214030752792 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214030752801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214030752801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214030752801 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:07:55.897016 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1074): Terminating (SIGTERM)
03:07:55.936568 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1077): Terminating (SIGTERM)
03:07:55.976290 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1080): Terminating (SIGTERM)
03:07:55.985620 ---      ParallelTerminationStrategy: PID 1074 died...
03:07:56.038692 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1074): Terminated: ok {rc=0}
03:07:56.048232 ---      ParallelTerminationStrategy: PID 1077 died...
03:07:56.100884 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1077): Terminated: ok {rc=0}
03:07:56.110510 ---      ParallelTerminationStrategy: PID 1080 died...
03:07:56.163085 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1080): Terminated: ok {rc=0}
03:07:56.246199 bus                          /gobi_0: Setting Powered False
03:07:57.352626 bus                          /gobi_0: Setting Powered False
03:07:58.460092 bus                          /gobi_6: Setting Powered False
