
----------------------------------------------
trial-2398 gprs:nanobts+band-900 ping.py
----------------------------------------------
03:17:42.060937 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.072226 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
03:17:42.206185 tst                          ping.py: using LAC 38175
03:17:42.322486 tst                          ping.py: using RAC 180
03:17:42.441922 tst                          ping.py: using CellId 38175
03:17:42.559081 tst                          ping.py: using BVCI 38176
03:17:42.581995 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.592773 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.603372 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.613933 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.624471 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.635191 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.646118 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:42.656744 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
03:17:42.948537 tst                       ping.py:19: start network...
03:17:43.081838 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:17:43.583810 run          create_hlr_db(pid=2061): Launched
03:17:43.769552 bus                          /gobi_6: Setting Powered False
03:17:44.790177 run          create_hlr_db(pid=2061): Terminated: ok {rc=0}
03:17:45.187998 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2067): Launched
03:17:45.483980 run    osmo-hlr_10.42.42.2(pid=2070): Launched
03:17:45.593987 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:17:46.187271 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2075): Launched
03:17:46.588523 run    osmo-stp_10.42.42.5(pid=2076): Launched
03:17:46.696080 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:17:47.338337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2080): Launched
03:17:47.445065 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:17:47.705636 run               patchelf(pid=2081): Launched
03:17:47.879746 run    osmo-stp_10.42.42.5(pid=2076): ERR: Terminated: ERROR {rc=1}  [trial-2398↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2076)]
03:17:48.007548 run    osmo-stp_10.42.42.5(pid=2076): stdout: 
| (launched: 2022-12-14_03:17:46.341434)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:17:48.134288 run    osmo-stp_10.42.42.5(pid=2076): stderr: 
| [0;m[38;5;43m20221214031746702 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214031746702 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214031746702 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214031746702 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214031746703 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214031746703 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214031746703 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:17:48.256461 run    osmo-stp_10.42.42.5(pid=2076): stdout: 
| (launched: 2022-12-14_03:17:46.341434)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:17:48.378172 run    osmo-stp_10.42.42.5(pid=2076): stderr: 
| [0;m[38;5;43m20221214031746702 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214031746702 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214031746702 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214031746702 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214031746703 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214031746703 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214031746703 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:17:48.520570 run               patchelf(pid=2081): Terminating (SIGINT)
03:17:48.688858 run               patchelf(pid=2081): Terminated: ok {rc=0}
03:17:48.719274 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=2076): Process ended prematurely: osmo-stp_10.42.42.5(pid=2076) [trial-2398↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2076)]  [trial-2398↪gprs:nanobts+band-900↪ping.py:22]
03:17:48.727907 tst                       ping.py:22: Test FAILED (6.7 sec)
03:17:48.787534 run    osmo-hlr_10.42.42.2(pid=2070): ERR: Terminated: ERROR {rc=237}  [trial-2398↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2070)]
03:17:48.836330 run    osmo-hlr_10.42.42.2(pid=2070): stdout: 
| (launched: 2022-12-14_03:17:45.338601) 
03:17:48.885622 run    osmo-hlr_10.42.42.2(pid=2070): stderr: 
| [0;m[1;31m20221214031745512 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214031745512 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214031745513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214031745513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214031745513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214031745513 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214031745525 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214031745534 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214031745536 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214031745536 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:17:48.927865 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2067): Terminating (SIGTERM)
03:17:48.967221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2075): Terminating (SIGTERM)
03:17:49.006564 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2080): Terminating (SIGTERM)
03:17:49.015852 ---      ParallelTerminationStrategy: PID 2067 died...
03:17:49.068510 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2067): Terminated: ok {rc=0}
03:17:49.078150 ---      ParallelTerminationStrategy: PID 2075 died...
03:17:49.130830 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2075): Terminated: ok {rc=0}
03:17:49.140396 ---      ParallelTerminationStrategy: PID 2080 died...
03:17:49.192928 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2080): Terminated: ok {rc=0}
03:17:49.280345 bus                          /gobi_6: Setting Powered False
