
----------------------------------------------
trial-2398 gprs:nanobts+band-900 ping_idle_ping.py
----------------------------------------------
03:17:50.332059 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.343387 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
03:17:50.484527 tst                ping_idle_ping.py: using LAC 38176
03:17:50.613581 tst                ping_idle_ping.py: using RAC 181
03:17:50.738704 tst                ping_idle_ping.py: using CellId 38176
03:17:50.868741 tst                ping_idle_ping.py: using BVCI 38177
03:17:50.894204 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.905337 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.916065 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.927251 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.938478 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.949606 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.960847 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
03:17:50.972032 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
03:17:51.248671 tst             ping_idle_ping.py:24: start network...
03:17:51.385560 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:17:51.892405 run          create_hlr_db(pid=2084): Launched
03:17:52.079187 bus                          /gobi_6: Setting Powered False
03:17:53.099004 run          create_hlr_db(pid=2084): Terminated: ok {rc=0}
03:17:53.527627 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2086): Launched
03:17:53.851125 run    osmo-hlr_10.42.42.2(pid=2087): Launched
03:17:53.965843 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:17:54.506794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2089): Launched
03:17:54.828541 run    osmo-stp_10.42.42.5(pid=2090): Launched
03:17:54.948673 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:17:55.506786 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2092): Launched
03:17:55.621041 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:17:55.901049 run               patchelf(pid=2093): Launched
03:17:56.089365 run    osmo-stp_10.42.42.5(pid=2090): ERR: Terminated: ERROR {rc=1}  [trial-2398↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2090)]
03:17:56.226238 run    osmo-stp_10.42.42.5(pid=2090): stdout: 
| (launched: 2022-12-14_03:17:54.671228)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:17:56.363185 run    osmo-stp_10.42.42.5(pid=2090): stderr: 
| [0;m[38;5;43m20221214031754864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214031754864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214031754864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214031754865 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214031754865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214031754865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214031754865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:17:56.496845 run    osmo-stp_10.42.42.5(pid=2090): stdout: 
| (launched: 2022-12-14_03:17:54.671228)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:17:56.629203 run    osmo-stp_10.42.42.5(pid=2090): stderr: 
| [0;m[38;5;43m20221214031754864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214031754864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214031754864 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214031754865 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214031754865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214031754865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214031754865 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:17:56.782991 run               patchelf(pid=2093): Terminating (SIGINT)
03:17:56.964687 run               patchelf(pid=2093): Terminated: ok {rc=0}
03:17:56.997430 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=2090): Process ended prematurely: osmo-stp_10.42.42.5(pid=2090) [trial-2398↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2090)]  [trial-2398↪gprs:nanobts+band-900↪ping_idle_ping.py:27]
03:17:57.006751 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
03:17:57.069825 run    osmo-hlr_10.42.42.2(pid=2087): ERR: Terminated: ERROR {rc=237}  [trial-2398↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2087)]
03:17:57.121511 run    osmo-hlr_10.42.42.2(pid=2087): stdout: 
| (launched: 2022-12-14_03:17:53.690513) 
03:17:57.173653 run    osmo-hlr_10.42.42.2(pid=2087): stderr: 
| [0;m[1;31m20221214031753891 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214031753891 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214031753891 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214031753891 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214031753891 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214031753891 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214031753903 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214031753911 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214031753911 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214031753911 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:17:57.219039 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2086): Terminating (SIGTERM)
03:17:57.261503 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2089): Terminating (SIGTERM)
03:17:57.303578 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2092): Terminating (SIGTERM)
03:17:57.313393 ---      ParallelTerminationStrategy: PID 2086 died...
03:17:57.370060 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2086): Terminated: ok {rc=0}
03:17:57.380190 ---      ParallelTerminationStrategy: PID 2089 died...
03:17:57.436558 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2089): Terminated: ok {rc=0}
03:17:57.446714 ---      ParallelTerminationStrategy: PID 2092 died...
03:17:57.502928 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2092): Terminated: ok {rc=0}
03:17:57.591283 bus                          /gobi_6: Setting Powered False
