
----------------------------------------------
trial-2399 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
03:43:56.042344 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.054025 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
03:43:56.203461 tst                        iperf3.py: using LAC 38310
03:43:56.332542 tst                        iperf3.py: using RAC 60
03:43:56.461483 tst                        iperf3.py: using CellId 38310
03:43:56.591264 tst                        iperf3.py: using BVCI 38311
03:43:56.616614 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.628168 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.639404 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.650539 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.661852 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.673261 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.684657 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.696006 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
03:43:56.707467 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
03:43:56.992690 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
03:43:57.120451 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
03:43:57.440319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4729): Launched
03:43:57.707255 run iperf3-srv_10.42.42.10(pid=4730): Launched
03:43:57.893777 tst                      iperf3.py:8: start network...
03:43:58.021191 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
03:43:58.516858 run          create_hlr_db(pid=4731): Launched
03:43:58.692708 bus                          /gobi_6: Setting Powered False
03:43:59.714993 run          create_hlr_db(pid=4731): Terminated: ok {rc=0}
03:44:00.154143 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4733): Launched
03:44:00.486778 run    osmo-hlr_10.42.42.2(pid=4734): Launched
03:44:00.609556 run              osmo-stp_10.42.42.5: Starting osmo-stp
03:44:01.227202 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4736): Launched
03:44:01.633939 run    osmo-stp_10.42.42.5(pid=4737): Launched
03:44:01.758199 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
03:44:02.474567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4739): Launched
03:44:02.583902 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
03:44:02.853096 run               patchelf(pid=4740): Launched
03:44:03.031910 run    osmo-stp_10.42.42.5(pid=4737): ERR: Terminated: ERROR {rc=1}  [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4737)]
03:44:03.162679 run    osmo-stp_10.42.42.5(pid=4737): stdout: 
| (launched: 2022-12-14_03:44:01.397793)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:44:03.293851 run    osmo-stp_10.42.42.5(pid=4737): stderr: 
| [0;m[38;5;43m20221214034401767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214034401767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214034401768 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214034401769 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214034401769 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214034401769 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214034401770 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:44:03.420808 run    osmo-stp_10.42.42.5(pid=4737): stdout: 
| (launched: 2022-12-14_03:44:01.397793)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
03:44:03.546632 run    osmo-stp_10.42.42.5(pid=4737): stderr: 
| [0;m[38;5;43m20221214034401767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214034401767 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214034401768 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214034401769 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214034401769 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214034401769 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214034401770 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
03:44:03.692375 run               patchelf(pid=4740): Terminating (SIGINT)
03:44:03.863531 run               patchelf(pid=4740): Terminated: ok {rc=0}
03:44:03.894936 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4737): Process ended prematurely: osmo-stp_10.42.42.5(pid=4737) [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4737)]  [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
03:44:03.904261 tst                      iperf3.py:8: Test FAILED (7.9 sec)
03:44:03.964099 run    osmo-hlr_10.42.42.2(pid=4734): ERR: Terminated: ERROR {rc=237}  [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4734)]
03:44:04.013036 run    osmo-hlr_10.42.42.2(pid=4734): stdout: 
| (launched: 2022-12-14_03:44:00.321996) 
03:44:04.062832 run    osmo-hlr_10.42.42.2(pid=4734): stderr: 
| [0;m[1;31m20221214034400522 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214034400522 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214034400522 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214034400522 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214034400522 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214034400523 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214034400534 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214034400543 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214034400543 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214034400544 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
03:44:04.105186 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4729): Terminating (SIGTERM)
03:44:04.144939 run iperf3-srv_10.42.42.10(pid=4730): Terminating (SIGTERM)
03:44:04.184699 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4733): Terminating (SIGTERM)
03:44:04.224336 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4736): Terminating (SIGTERM)
03:44:04.263956 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4739): Terminating (SIGTERM)
03:44:04.273231 ---      ParallelTerminationStrategy: PID 4729 died...
03:44:04.326595 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4729): Terminated: ok {rc=0}
03:44:04.336347 ---      ParallelTerminationStrategy: PID 4730 died...
03:44:04.390039 run iperf3-srv_10.42.42.10(pid=4730): Terminated {rc=256}
03:44:04.400077 ---      ParallelTerminationStrategy: PID 4733 died...
03:44:04.453322 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4733): Terminated: ok {rc=0}
03:44:04.463013 ---      ParallelTerminationStrategy: PID 4736 died...
03:44:04.516172 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4736): Terminated: ok {rc=0}
03:44:04.525866 ---      ParallelTerminationStrategy: PID 4739 died...
03:44:04.578662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4739): Terminated: ok {rc=0}
03:44:04.666951 bus                          /gobi_6: Setting Powered False
