
----------------------------------------------
trial-2400 gprs:nanobts+band-1900 iperf3m4.py
----------------------------------------------
06:33:08.907412 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:08.919417 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
06:33:09.051325 tst                      iperf3m4.py: using LAC 39063
06:33:09.175153 tst                      iperf3m4.py: using RAC 48
06:33:09.298781 tst                      iperf3m4.py: using CellId 39063
06:33:09.422649 tst                      iperf3m4.py: using BVCI 39064
06:33:09.446538 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.457580 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.468305 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.479173 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.490319 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.501317 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.512463 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.523575 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
06:33:09.534790 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
06:33:09.656750 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
06:33:09.780800 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
06:33:09.899558 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
06:33:10.199242 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
06:33:10.339827 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:33:10.687677 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18074): Launched
06:33:10.975859 run iperf3-srv_10.42.42.10(pid=18075): Launched
06:33:11.181313 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
06:33:11.321945 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:33:11.669062 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18076): Launched
06:33:11.956675 run iperf3-srv_10.42.42.10(pid=18077): Launched
06:33:12.162599 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
06:33:12.302759 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:33:12.649743 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18078): Launched
06:33:12.939502 run iperf3-srv_10.42.42.10(pid=18079): Launched
06:33:13.145037 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
06:33:13.285065 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:33:13.632004 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18080): Launched
06:33:13.921573 run iperf3-srv_10.42.42.10(pid=18081): Launched
06:33:14.126738 tst                    iperf3m4.py:8: start network...
06:33:14.267064 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:33:14.802690 run         create_hlr_db(pid=18082): Launched
06:33:14.997300 bus                          /gobi_6: Setting Powered False
06:33:16.053204 run         create_hlr_db(pid=18082): Terminated: ok {rc=0}
06:33:16.515252 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18084): Launched
06:33:16.957592 run   osmo-hlr_10.42.42.2(pid=18085): Launched
06:33:17.154362 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:33:17.736355 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18087): Launched
06:33:18.070404 run   osmo-stp_10.42.42.5(pid=18088): Launched
06:33:18.193143 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:33:18.775916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18090): Launched
06:33:18.895836 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:33:19.189219 run              patchelf(pid=18091): Launched
06:33:19.387012 run   osmo-stp_10.42.42.5(pid=18088): ERR: Terminated: ERROR {rc=1}  [trial-2400↪gprs:nanobts+band-1900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18088)]
06:33:19.530272 run   osmo-stp_10.42.42.5(pid=18088): stdout: 
| (launched: 2022-12-14_06:33:17.906778)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:33:19.673946 run   osmo-stp_10.42.42.5(pid=18088): stderr: 
| [0;m[38;5;43m20221214063318099 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214063318100 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214063318100 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214063318100 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214063318101 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214063318101 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214063318101 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:33:19.813007 run   osmo-stp_10.42.42.5(pid=18088): stdout: 
| (launched: 2022-12-14_06:33:17.906778)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:33:19.950085 run   osmo-stp_10.42.42.5(pid=18088): stderr: 
| [0;m[38;5;43m20221214063318099 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214063318100 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214063318100 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214063318100 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214063318101 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214063318101 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214063318101 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:33:20.110073 run              patchelf(pid=18091): Terminating (SIGINT)
06:33:20.298100 run              patchelf(pid=18091): Terminated: ok {rc=0}
06:33:20.332316 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18088): Process ended prematurely: osmo-stp_10.42.42.5(pid=18088) [trial-2400↪gprs:nanobts+band-1900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18088)]  [trial-2400↪gprs:nanobts+band-1900↪iperf3m4.py:8]
06:33:20.342398 tst                    iperf3m4.py:8: Test FAILED (11.5 sec)
06:33:20.405764 run   osmo-hlr_10.42.42.2(pid=18085): ERR: Terminated: ERROR {rc=237}  [trial-2400↪gprs:nanobts+band-1900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18085)]
06:33:20.457374 run   osmo-hlr_10.42.42.2(pid=18085): stdout: 
| (launched: 2022-12-14_06:33:16.689661) 
06:33:20.509955 run   osmo-hlr_10.42.42.2(pid=18085): stderr: 
| [0;m[1;31m20221214063316916 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214063316916 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214063316916 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214063316916 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214063316916 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214063316916 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214063316932 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:nanobts+band-1900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214063316952 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214063316952 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214063316952 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:33:20.554721 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18074): Terminating (SIGTERM)
06:33:20.597039 run iperf3-srv_10.42.42.10(pid=18075): Terminating (SIGTERM)
06:33:20.639264 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18076): Terminating (SIGTERM)
06:33:20.681409 run iperf3-srv_10.42.42.10(pid=18077): Terminating (SIGTERM)
06:33:20.723862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18078): Terminating (SIGTERM)
06:33:20.766165 run iperf3-srv_10.42.42.10(pid=18079): Terminating (SIGTERM)
06:33:20.808528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18080): Terminating (SIGTERM)
06:33:20.850618 run iperf3-srv_10.42.42.10(pid=18081): Terminating (SIGTERM)
06:33:20.892642 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18084): Terminating (SIGTERM)
06:33:20.934741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18087): Terminating (SIGTERM)
06:33:20.977151 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18090): Terminating (SIGTERM)
06:33:20.987279 ---      ParallelTerminationStrategy: PID 18074 died...
06:33:21.044282 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18074): Terminated: ok {rc=0}
06:33:21.054611 ---      ParallelTerminationStrategy: PID 18075 died...
06:33:21.111306 run iperf3-srv_10.42.42.10(pid=18075): Terminated {rc=256}
06:33:21.121998 ---      ParallelTerminationStrategy: PID 18076 died...
06:33:21.178790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18076): Terminated: ok {rc=0}
06:33:21.189190 ---      ParallelTerminationStrategy: PID 18077 died...
06:33:21.245691 run iperf3-srv_10.42.42.10(pid=18077): Terminated {rc=256}
06:33:21.255932 ---      ParallelTerminationStrategy: PID 18078 died...
06:33:21.312138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18078): Terminated: ok {rc=0}
06:33:21.322538 ---      ParallelTerminationStrategy: PID 18079 died...
06:33:21.378861 run iperf3-srv_10.42.42.10(pid=18079): Terminated {rc=256}
06:33:21.389226 ---      ParallelTerminationStrategy: PID 18080 died...
06:33:21.445744 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18080): Terminated: ok {rc=0}
06:33:21.456449 ---      ParallelTerminationStrategy: PID 18081 died...
06:33:21.513442 run iperf3-srv_10.42.42.10(pid=18081): Terminated {rc=256}
06:33:21.523754 ---      ParallelTerminationStrategy: PID 18084 died...
06:33:21.580269 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18084): Terminated: ok {rc=0}
06:33:21.590695 ---      ParallelTerminationStrategy: PID 18087 died...
06:33:21.647054 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18087): Terminated: ok {rc=0}
06:33:21.657442 ---      ParallelTerminationStrategy: PID 18090 died...
06:33:21.714294 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18090): Terminated: ok {rc=0}
06:33:21.802586 bus                          /gobi_4: Setting Powered False
06:33:22.909828 bus                          /gobi_4: Setting Powered False
06:33:24.017777 bus                          /gobi_1: Setting Powered False
06:33:25.120516 bus                          /gobi_1: Setting Powered False
06:33:26.231247 bus                          /gobi_0: Setting Powered False
06:33:27.331858 bus                          /gobi_0: Setting Powered False
06:33:28.440912 bus                          /gobi_6: Setting Powered False
