
----------------------------------------------
trial-2400 gprs:nanobts+band-900 ping_idle_ping.py
----------------------------------------------
06:39:55.897405 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:55.909335 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
06:39:56.054292 tst                ping_idle_ping.py: using LAC 39098
06:39:56.183747 tst                ping_idle_ping.py: using RAC 83
06:39:56.314320 tst                ping_idle_ping.py: using CellId 39098
06:39:56.445940 tst                ping_idle_ping.py: using BVCI 39099
06:39:56.471198 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:56.482670 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:56.493867 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:56.505095 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:56.516077 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:56.527258 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:56.538618 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
06:39:56.549801 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
06:39:56.832515 tst             ping_idle_ping.py:24: start network...
06:39:56.961742 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:39:57.450721 run         create_hlr_db(pid=18810): Launched
06:39:57.629401 bus                          /gobi_6: Setting Powered False
06:39:58.649462 run         create_hlr_db(pid=18810): Terminated: ok {rc=0}
06:39:59.086577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18812): Launched
06:39:59.416324 run   osmo-hlr_10.42.42.2(pid=18813): Launched
06:39:59.537055 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:40:00.112884 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18815): Launched
06:40:00.446782 run   osmo-stp_10.42.42.5(pid=18816): Launched
06:40:00.567628 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:40:01.155057 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18818): Launched
06:40:01.275375 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:40:01.612830 run              patchelf(pid=18819): Launched
06:40:01.800136 run   osmo-stp_10.42.42.5(pid=18816): ERR: Terminated: ERROR {rc=1}  [trial-2400↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18816)]
06:40:01.980008 run   osmo-stp_10.42.42.5(pid=18816): stdout: 
| (launched: 2022-12-14_06:40:00.281896)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:40:02.117164 run   osmo-stp_10.42.42.5(pid=18816): stderr: 
| [0;m[38;5;43m20221214064000483 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214064000483 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214064000483 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214064000483 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214064000484 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214064000484 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214064000484 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:40:02.249857 run   osmo-stp_10.42.42.5(pid=18816): stdout: 
| (launched: 2022-12-14_06:40:00.281896)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:40:02.382970 run   osmo-stp_10.42.42.5(pid=18816): stderr: 
| [0;m[38;5;43m20221214064000483 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214064000483 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214064000483 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214064000483 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214064000484 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214064000484 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214064000484 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:40:02.539987 run              patchelf(pid=18819): Terminating (SIGINT)
06:40:02.724567 run              patchelf(pid=18819): Terminated: ok {rc=0}
06:40:02.758166 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18816): Process ended prematurely: osmo-stp_10.42.42.5(pid=18816) [trial-2400↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18816)]  [trial-2400↪gprs:nanobts+band-900↪ping_idle_ping.py:27]
06:40:02.767600 tst             ping_idle_ping.py:27: Test FAILED (6.9 sec)
06:40:02.830793 run   osmo-hlr_10.42.42.2(pid=18813): ERR: Terminated: ERROR {rc=237}  [trial-2400↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18813)]
06:40:02.882445 run   osmo-hlr_10.42.42.2(pid=18813): stdout: 
| (launched: 2022-12-14_06:39:59.253696) 
06:40:02.934736 run   osmo-hlr_10.42.42.2(pid=18813): stderr: 
| [0;m[1;31m20221214063959456 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214063959456 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214063959456 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214063959456 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214063959457 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214063959457 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214063959472 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214063959480 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214063959481 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214063959481 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:40:02.979342 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18812): Terminating (SIGTERM)
06:40:03.022058 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18815): Terminating (SIGTERM)
06:40:03.064106 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18818): Terminating (SIGTERM)
06:40:03.074125 ---      ParallelTerminationStrategy: PID 18812 died...
06:40:03.130491 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18812): Terminated: ok {rc=0}
06:40:03.140871 ---      ParallelTerminationStrategy: PID 18815 died...
06:40:03.196804 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18815): Terminated: ok {rc=0}
06:40:03.206971 ---      ParallelTerminationStrategy: PID 18818 died...
06:40:03.262811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18818): Terminated: ok {rc=0}
06:40:03.348842 bus                          /gobi_6: Setting Powered False
