
----------------------------------------------
trial-2400 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
06:12:28.867141 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:28.878553 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
06:12:29.019805 tst         cs_paging_gprs_active.py: using LAC 38954
06:12:29.143902 tst         cs_paging_gprs_active.py: using RAC 194
06:12:29.267120 tst         cs_paging_gprs_active.py: using CellId 38954
06:12:29.391424 tst         cs_paging_gprs_active.py: using BVCI 38955
06:12:29.415259 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.426528 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.437557 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.448557 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.459926 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.471322 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.482809 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.494084 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
06:12:29.505618 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
06:12:29.626276 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
06:12:29.913209 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
06:12:30.043685 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:12:30.369407 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16337): Launched
06:12:30.639188 run iperf3-srv_10.42.42.10(pid=16338): Launched
06:12:30.831089 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
06:12:30.964592 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
06:12:31.312942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16339): Launched
06:12:31.607916 run iperf3-srv_10.42.42.10(pid=16340): Launched
06:12:31.804202 tst      cs_paging_gprs_active.py:38: start network...
06:12:31.939393 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:12:32.438688 run         create_hlr_db(pid=16341): Launched
06:12:32.619227 bus                          /gobi_6: Setting Powered False
06:12:33.639954 run         create_hlr_db(pid=16341): Terminated: ok {rc=0}
06:12:34.084023 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16343): Launched
06:12:34.419265 run   osmo-hlr_10.42.42.2(pid=16344): Launched
06:12:34.543984 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:12:35.122283 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16346): Launched
06:12:35.455262 run   osmo-stp_10.42.42.5(pid=16347): Launched
06:12:35.576348 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:12:36.155061 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16349): Launched
06:12:36.274068 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:12:36.563961 run              patchelf(pid=16350): Launched
06:12:36.757547 run   osmo-stp_10.42.42.5(pid=16347): ERR: Terminated: ERROR {rc=1}  [trial-2400↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16347)]
06:12:36.899722 run   osmo-stp_10.42.42.5(pid=16347): stdout: 
| (launched: 2022-12-14_06:12:35.291882)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:12:37.041767 run   osmo-stp_10.42.42.5(pid=16347): stderr: 
| [0;m[38;5;43m20221214061235486 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214061235486 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214061235486 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214061235487 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214061235487 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214061235487 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214061235487 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:12:37.180159 run   osmo-stp_10.42.42.5(pid=16347): stdout: 
| (launched: 2022-12-14_06:12:35.291882)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:12:37.316088 run   osmo-stp_10.42.42.5(pid=16347): stderr: 
| [0;m[38;5;43m20221214061235486 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214061235486 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214061235486 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214061235487 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214061235487 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214061235487 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214061235487 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:12:37.473873 run              patchelf(pid=16350): Terminating (SIGINT)
06:12:37.659265 run              patchelf(pid=16350): Terminated: ok {rc=0}
06:12:37.693147 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16347): Process ended prematurely: osmo-stp_10.42.42.5(pid=16347) [trial-2400↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16347)]  [trial-2400↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
06:12:37.703178 tst      cs_paging_gprs_active.py:38: Test FAILED (8.9 sec)
06:12:37.765982 run   osmo-hlr_10.42.42.2(pid=16344): ERR: Terminated: ERROR {rc=237}  [trial-2400↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16344)]
06:12:37.817254 run   osmo-hlr_10.42.42.2(pid=16344): stdout: 
| (launched: 2022-12-14_06:12:34.254591) 
06:12:37.869444 run   osmo-hlr_10.42.42.2(pid=16344): stderr: 
| [0;m[1;31m20221214061234453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214061234453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214061234453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214061234453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214061234453 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214061234454 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214061234466 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214061234475 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214061234476 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214061234476 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:12:37.913871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16337): Terminating (SIGTERM)
06:12:37.956257 run iperf3-srv_10.42.42.10(pid=16338): Terminating (SIGTERM)
06:12:37.998430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16339): Terminating (SIGTERM)
06:12:38.040191 run iperf3-srv_10.42.42.10(pid=16340): Terminating (SIGTERM)
06:12:38.082767 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16343): Terminating (SIGTERM)
06:12:38.125185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16346): Terminating (SIGTERM)
06:12:38.167189 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16349): Terminating (SIGTERM)
06:12:38.176844 ---      ParallelTerminationStrategy: PID 16337 died...
06:12:38.233539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16337): Terminated: ok {rc=0}
06:12:38.243702 ---      ParallelTerminationStrategy: PID 16338 died...
06:12:38.299543 run iperf3-srv_10.42.42.10(pid=16338): Terminated {rc=256}
06:12:38.309963 ---      ParallelTerminationStrategy: PID 16339 died...
06:12:38.365793 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16339): Terminated: ok {rc=0}
06:12:38.375856 ---      ParallelTerminationStrategy: PID 16340 died...
06:12:38.431308 run iperf3-srv_10.42.42.10(pid=16340): Terminated {rc=256}
06:12:38.441409 ---      ParallelTerminationStrategy: PID 16343 died...
06:12:38.496687 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16343): Terminated: ok {rc=0}
06:12:38.506817 ---      ParallelTerminationStrategy: PID 16346 died...
06:12:38.562694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16346): Terminated: ok {rc=0}
06:12:38.572847 ---      ParallelTerminationStrategy: PID 16349 died...
06:12:38.628353 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16349): Terminated: ok {rc=0}
06:12:38.715289 bus                          /gobi_0: Setting Powered False
06:12:39.821458 bus                          /gobi_0: Setting Powered False
06:12:40.929980 bus                          /gobi_6: Setting Powered False
