
----------------------------------------------
trial-2402 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
09:25:45.732235 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:45.744166 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
09:25:45.938302 tst               switch_tch_pdch.py: using LAC 39966
09:25:46.066203 tst               switch_tch_pdch.py: using RAC 186
09:25:46.186979 tst               switch_tch_pdch.py: using CellId 39966
09:25:46.340588 tst               switch_tch_pdch.py: using BVCI 39967
09:25:46.372810 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:46.388026 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:46.401942 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:46.417128 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:46.433531 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:46.450573 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:46.467362 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
09:25:46.484418 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
09:25:46.610727 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
09:25:46.890072 tst            switch_tch_pdch.py:51: start network...
09:25:47.016577 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:25:47.466212 run          create_hlr_db(pid=1031): Launched
09:25:47.587552 bus                          /gobi_6: Setting Powered False
09:25:48.658540 run          create_hlr_db(pid=1031): Terminated: ok {rc=0}
09:25:49.052684 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1033): Launched
09:25:49.371222 run    osmo-hlr_10.42.42.2(pid=1034): Launched
09:25:49.490574 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:25:50.016708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1036): Launched
09:25:50.333161 run    osmo-stp_10.42.42.5(pid=1037): Launched
09:25:50.446104 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:25:50.972194 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1039): Launched
09:25:51.084452 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:25:51.362103 run               patchelf(pid=1040): Launched
09:25:51.547041 run    osmo-stp_10.42.42.5(pid=1037): ERR: Terminated: ERROR {rc=1}  [trial-2402↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1037)]
09:25:51.682130 run    osmo-stp_10.42.42.5(pid=1037): stdout: 
| (launched: 2022-12-14_09:25:50.177255)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:25:51.817322 run    osmo-stp_10.42.42.5(pid=1037): stderr: 
| [0;m[38;5;43m20221214092550365 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214092550365 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214092550366 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214092550366 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214092550367 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214092550367 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214092550367 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:25:51.948436 run    osmo-stp_10.42.42.5(pid=1037): stdout: 
| (launched: 2022-12-14_09:25:50.177255)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:25:52.075276 run    osmo-stp_10.42.42.5(pid=1037): stderr: 
| [0;m[38;5;43m20221214092550365 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214092550365 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214092550366 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214092550366 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214092550367 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214092550367 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214092550367 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:25:52.216623 run               patchelf(pid=1040): Terminating (SIGINT)
09:25:52.382240 run               patchelf(pid=1040): Terminated: ok {rc=0}
09:25:52.412473 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=1037): Process ended prematurely: osmo-stp_10.42.42.5(pid=1037) [trial-2402↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1037)]  [trial-2402↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
09:25:52.421348 tst            switch_tch_pdch.py:54: Test FAILED (6.7 sec)
09:25:52.481327 run    osmo-hlr_10.42.42.2(pid=1034): ERR: Terminated: ERROR {rc=237}  [trial-2402↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1034)]
09:25:52.530588 run    osmo-hlr_10.42.42.2(pid=1034): stdout: 
| (launched: 2022-12-14_09:25:49.213959) 
09:25:52.580481 run    osmo-hlr_10.42.42.2(pid=1034): stderr: 
| [0;m[1;31m20221214092549407 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214092549407 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214092549408 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214092549408 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214092549408 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214092549408 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214092549421 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214092549430 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214092549431 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214092549431 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:25:52.622733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1033): Terminating (SIGTERM)
09:25:52.662464 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1036): Terminating (SIGTERM)
09:25:52.702103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1039): Terminating (SIGTERM)
09:25:52.711240 ---      ParallelTerminationStrategy: PID 1033 died...
09:25:52.764752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1033): Terminated: ok {rc=0}
09:25:52.774241 ---      ParallelTerminationStrategy: PID 1036 died...
09:25:52.827352 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1036): Terminated: ok {rc=0}
09:25:52.836834 ---      ParallelTerminationStrategy: PID 1039 died...
09:25:52.889855 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1039): Terminated: ok {rc=0}
09:25:52.977542 bus                          /gobi_0: Setting Powered False
09:25:54.080475 bus                          /gobi_0: Setting Powered False
09:25:55.191956 bus                          /gobi_6: Setting Powered False
