
----------------------------------------------
trial-2402 gprs:nanobts+band-900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
09:36:40.255942 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.268905 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
09:36:40.407468 tst                ping_idle_ping.py: using LAC 40025
09:36:40.526494 tst                ping_idle_ping.py: using RAC 245
09:36:40.649906 tst                ping_idle_ping.py: using CellId 40025
09:36:40.781907 tst                ping_idle_ping.py: using BVCI 40026
09:36:40.804462 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.815720 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.826579 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.837341 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.848301 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.859382 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.870649 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
09:36:40.881745 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
09:36:41.154240 tst             ping_idle_ping.py:24: start network...
09:36:41.276843 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:36:41.746326 run          create_hlr_db(pid=1813): Launched
09:36:41.916562 bus                          /gobi_6: Setting Powered False
09:36:42.938806 run          create_hlr_db(pid=1813): Terminated: ok {rc=0}
09:36:43.360940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1816): Launched
09:36:43.679077 run    osmo-hlr_10.42.42.2(pid=1817): Launched
09:36:43.798941 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:36:44.358324 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1820): Launched
09:36:44.676774 run    osmo-stp_10.42.42.5(pid=1821): Launched
09:36:44.792201 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:36:45.347643 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1823): Launched
09:36:45.460285 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:36:45.737345 run               patchelf(pid=1824): Launched
09:36:45.943145 run    osmo-stp_10.42.42.5(pid=1821): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1821)]
09:36:46.082851 run    osmo-stp_10.42.42.5(pid=1821): stdout: 
| (launched: 2022-12-14_09:36:44.519913)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:36:46.226236 run    osmo-stp_10.42.42.5(pid=1821): stderr: 
| [0;m[38;5;43m20221214093644706 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214093644706 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214093644707 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214093644707 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214093644708 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214093644708 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214093644708 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:36:46.362166 run    osmo-stp_10.42.42.5(pid=1821): stdout: 
| (launched: 2022-12-14_09:36:44.519913)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:36:46.496047 run    osmo-stp_10.42.42.5(pid=1821): stderr: 
| [0;m[38;5;43m20221214093644706 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214093644706 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214093644707 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214093644707 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214093644708 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214093644708 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214093644708 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:36:46.651826 run               patchelf(pid=1824): Terminating (SIGINT)
09:36:46.834929 run               patchelf(pid=1824): Terminated: ok {rc=0}
09:36:46.868503 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=1821): Process ended prematurely: osmo-stp_10.42.42.5(pid=1821) [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1821)]  [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27]
09:36:46.878625 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
09:36:46.943498 run    osmo-hlr_10.42.42.2(pid=1817): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1817)]
09:36:46.996186 run    osmo-hlr_10.42.42.2(pid=1817): stdout: 
| (launched: 2022-12-14_09:36:43.522572) 
09:36:47.049751 run    osmo-hlr_10.42.42.2(pid=1817): stderr: 
| [0;m[1;31m20221214093643717 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214093643717 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214093643717 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214093643717 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214093643717 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214093643717 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214093643730 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:nanobts+band-900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214093643738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214093643738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214093643738 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:36:47.096284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1816): Terminating (SIGTERM)
09:36:47.145879 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1820): Terminating (SIGTERM)
09:36:47.189692 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1823): Terminating (SIGTERM)
09:36:47.199516 ---      ParallelTerminationStrategy: PID 1816 died...
09:36:47.253431 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1816): Terminated: ok {rc=0}
09:36:47.263123 ---      ParallelTerminationStrategy: PID 1820 died...
09:36:47.316831 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1820): Terminated: ok {rc=0}
09:36:47.326502 ---      ParallelTerminationStrategy: PID 1823 died...
09:36:47.380013 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1823): Terminated: ok {rc=0}
09:36:47.467236 bus                          /gobi_6: Setting Powered False
