
----------------------------------------------
trial-2402 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
08:51:44.294273 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.306173 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
08:51:44.453452 tst         cs_paging_gprs_active.py: using LAC 39785
08:51:44.582809 tst         cs_paging_gprs_active.py: using RAC 5
08:51:44.710152 tst         cs_paging_gprs_active.py: using CellId 39785
08:51:44.837720 tst         cs_paging_gprs_active.py: using BVCI 39786
08:51:44.862967 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.875065 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.886689 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.898567 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.910124 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.921732 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.933395 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.944853 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
08:51:44.956645 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
08:51:45.074544 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
08:51:45.360342 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
08:51:45.488881 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:51:45.807352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30194): Launched
08:51:46.122101 run iperf3-srv_10.42.42.10(pid=30195): Launched
08:51:46.400414 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
08:51:46.561383 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:51:46.911616 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30196): Launched
08:51:47.195008 run iperf3-srv_10.42.42.10(pid=30197): Launched
08:51:47.385397 tst      cs_paging_gprs_active.py:38: start network...
08:51:47.514403 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:51:47.998081 run         create_hlr_db(pid=30198): Launched
08:51:48.173455 bus                          /gobi_6: Setting Powered False
08:51:49.195326 run         create_hlr_db(pid=30198): Terminated: ok {rc=0}
08:51:49.600517 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30200): Launched
08:51:49.906132 run   osmo-hlr_10.42.42.2(pid=30201): Launched
08:51:50.023792 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:51:50.560865 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30203): Launched
08:51:50.865918 run   osmo-stp_10.42.42.5(pid=30204): Launched
08:51:50.977410 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:51:51.510424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30206): Launched
08:51:51.619218 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:51:51.885815 run              patchelf(pid=30207): Launched
08:51:52.064522 run   osmo-stp_10.42.42.5(pid=30204): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30204)]
08:51:52.195076 run   osmo-stp_10.42.42.5(pid=30204): stdout: 
| (launched: 2022-12-14_08:51:50.715524)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:51:52.325706 run   osmo-stp_10.42.42.5(pid=30204): stderr: 
| [0;m[38;5;43m20221214085150889 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214085150889 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214085150889 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214085150890 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214085150890 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214085150890 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214085150891 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:51:52.452241 run   osmo-stp_10.42.42.5(pid=30204): stdout: 
| (launched: 2022-12-14_08:51:50.715524)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:51:52.577879 run   osmo-stp_10.42.42.5(pid=30204): stderr: 
| [0;m[38;5;43m20221214085150889 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214085150889 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214085150889 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214085150890 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214085150890 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214085150890 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214085150891 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:51:52.723148 run              patchelf(pid=30207): Terminating (SIGINT)
08:51:52.893770 run              patchelf(pid=30207): Terminated: ok {rc=0}
08:51:52.924925 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30204): Process ended prematurely: osmo-stp_10.42.42.5(pid=30204) [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30204)]  [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
08:51:52.934281 tst      cs_paging_gprs_active.py:38: Test FAILED (8.7 sec)
08:51:52.995260 run   osmo-hlr_10.42.42.2(pid=30201): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30201)]
08:51:53.044788 run   osmo-hlr_10.42.42.2(pid=30201): stdout: 
| (launched: 2022-12-14_08:51:49.755757) 
08:51:53.094747 run   osmo-hlr_10.42.42.2(pid=30201): stderr: 
| [0;m[1;31m20221214085149932 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214085149932 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214085149932 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214085149932 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214085149932 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214085149932 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214085149947 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214085149956 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214085149956 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214085149956 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:51:53.137492 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30194): Terminating (SIGTERM)
08:51:53.177453 run iperf3-srv_10.42.42.10(pid=30195): Terminating (SIGTERM)
08:51:53.217624 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30196): Terminating (SIGTERM)
08:51:53.257672 run iperf3-srv_10.42.42.10(pid=30197): Terminating (SIGTERM)
08:51:53.297843 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30200): Terminating (SIGTERM)
08:51:53.337909 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30203): Terminating (SIGTERM)
08:51:53.377713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30206): Terminating (SIGTERM)
08:51:53.386832 ---      ParallelTerminationStrategy: PID 30194 died...
08:51:53.439949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30194): Terminated: ok {rc=0}
08:51:53.449471 ---      ParallelTerminationStrategy: PID 30195 died...
08:51:53.502808 run iperf3-srv_10.42.42.10(pid=30195): Terminated {rc=256}
08:51:53.512316 ---      ParallelTerminationStrategy: PID 30196 died...
08:51:53.565870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30196): Terminated: ok {rc=0}
08:51:53.575327 ---      ParallelTerminationStrategy: PID 30197 died...
08:51:53.628493 run iperf3-srv_10.42.42.10(pid=30197): Terminated {rc=256}
08:51:53.637983 ---      ParallelTerminationStrategy: PID 30200 died...
08:51:53.691452 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30200): Terminated: ok {rc=0}
08:51:53.700922 ---      ParallelTerminationStrategy: PID 30203 died...
08:51:53.754347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30203): Terminated: ok {rc=0}
08:51:53.763897 ---      ParallelTerminationStrategy: PID 30206 died...
08:51:53.817602 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30206): Terminated: ok {rc=0}
08:51:53.906105 bus                          /gobi_0: Setting Powered False
08:51:55.009844 bus                          /gobi_0: Setting Powered False
08:51:56.121017 bus                          /gobi_6: Setting Powered False
