
----------------------------------------------
trial-2402 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py
----------------------------------------------
09:24:35.123843 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.134889 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
09:24:35.291062 tst         cs_paging_gprs_active.py: using LAC 39960
09:24:35.407398 tst         cs_paging_gprs_active.py: using RAC 180
09:24:35.526666 tst         cs_paging_gprs_active.py: using CellId 39960
09:24:35.642532 tst         cs_paging_gprs_active.py: using BVCI 39961
09:24:35.665543 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.676506 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.687350 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.698245 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.709604 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.720792 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.732209 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.743330 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
09:24:35.754753 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
09:24:35.876297 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
09:24:36.171213 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
09:24:36.305726 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
09:24:36.639632 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=941): Launched
09:24:36.918660 run  iperf3-srv_10.42.42.10(pid=942): Launched
09:24:37.115562 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
09:24:37.250175 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
09:24:37.583797 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=943): Launched
09:24:37.862595 run  iperf3-srv_10.42.42.10(pid=944): Launched
09:24:38.059594 tst      cs_paging_gprs_active.py:38: start network...
09:24:38.193951 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
09:24:38.710033 run           create_hlr_db(pid=945): Launched
09:24:38.895232 bus                          /gobi_6: Setting Powered False
09:24:39.917426 run           create_hlr_db(pid=945): Terminated: ok {rc=0}
09:24:40.322028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=947): Launched
09:24:40.627245 run     osmo-hlr_10.42.42.2(pid=948): Launched
09:24:40.746456 run              osmo-stp_10.42.42.5: Starting osmo-stp
09:24:41.273378 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=950): Launched
09:24:41.577600 run     osmo-stp_10.42.42.5(pid=951): Launched
09:24:41.688594 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
09:24:42.214743 run pcap-recorder_any(filters='host 10.42.42.6')(pid=954): Launched
09:24:42.322317 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
09:24:42.593955 run                patchelf(pid=955): Launched
09:24:42.771355 run     osmo-stp_10.42.42.5(pid=951): ERR: Terminated: ERROR {rc=1}  [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=951)]
09:24:42.901331 run     osmo-stp_10.42.42.5(pid=951): stdout: 
| (launched: 2022-12-14_09:24:41.426335)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:24:43.031474 run     osmo-stp_10.42.42.5(pid=951): stderr: 
| [0;m[38;5;43m20221214092441595 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214092441596 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214092441596 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214092441596 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214092441597 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214092441597 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214092441597 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:24:43.157142 run     osmo-stp_10.42.42.5(pid=951): stdout: 
| (launched: 2022-12-14_09:24:41.426335)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
09:24:43.281666 run     osmo-stp_10.42.42.5(pid=951): stderr: 
| [0;m[38;5;43m20221214092441595 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214092441596 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214092441596 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214092441596 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214092441597 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214092441597 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214092441597 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
09:24:43.426416 run                patchelf(pid=955): Terminating (SIGINT)
09:24:43.595951 run                patchelf(pid=955): Terminated: ok {rc=0}
09:24:43.627290 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=951): Process ended prematurely: osmo-stp_10.42.42.5(pid=951) [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=951)]  [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38]
09:24:43.636740 tst      cs_paging_gprs_active.py:38: Test FAILED (8.5 sec)
09:24:43.697484 run     osmo-hlr_10.42.42.2(pid=948): ERR: Terminated: ERROR {rc=237}  [trial-2402↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=948)]
09:24:43.746701 run     osmo-hlr_10.42.42.2(pid=948): stdout: 
| (launched: 2022-12-14_09:24:40.475106) 
09:24:43.796565 run     osmo-hlr_10.42.42.2(pid=948): stderr: 
| [0;m[1;31m20221214092440647 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214092440647 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214092440647 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214092440647 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214092440647 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214092440647 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214092440660 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214092440670 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214092440670 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214092440671 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
09:24:43.839121 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=941): Terminating (SIGTERM)
09:24:43.879160 run  iperf3-srv_10.42.42.10(pid=942): Terminating (SIGTERM)
09:24:43.919189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=943): Terminating (SIGTERM)
09:24:43.959056 run  iperf3-srv_10.42.42.10(pid=944): Terminating (SIGTERM)
09:24:43.999036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=947): Terminating (SIGTERM)
09:24:44.038870 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=950): Terminating (SIGTERM)
09:24:44.078893 run pcap-recorder_any(filters='host 10.42.42.6')(pid=954): Terminating (SIGTERM)
09:24:44.088052 ---      ParallelTerminationStrategy: PID 941 died...
09:24:44.141701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=941): Terminated: ok {rc=0}
09:24:44.151187 ---      ParallelTerminationStrategy: PID 942 died...
09:24:44.204341 run  iperf3-srv_10.42.42.10(pid=942): Terminated {rc=256}
09:24:44.213845 ---      ParallelTerminationStrategy: PID 943 died...
09:24:44.266961 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=943): Terminated: ok {rc=0}
09:24:44.276323 ---      ParallelTerminationStrategy: PID 944 died...
09:24:44.329483 run  iperf3-srv_10.42.42.10(pid=944): Terminated {rc=256}
09:24:44.338998 ---      ParallelTerminationStrategy: PID 947 died...
09:24:44.392231 run pcap-recorder_any(filters='host 10.42.42.2')(pid=947): Terminated: ok {rc=0}
09:24:44.401741 ---      ParallelTerminationStrategy: PID 950 died...
09:24:44.454958 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=950): Terminated: ok {rc=0}
09:24:44.464486 ---      ParallelTerminationStrategy: PID 954 died...
09:24:44.517540 run pcap-recorder_any(filters='host 10.42.42.6')(pid=954): Terminated: ok {rc=0}
09:24:44.606271 bus                          /gobi_0: Setting Powered False
09:24:45.714074 bus                          /gobi_0: Setting Powered False
09:24:46.826258 bus                          /gobi_6: Setting Powered False
