
----------------------------------------------
trial-2403 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
10:58:05.072672 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.084673 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
10:58:05.214106 tst                ping_idle_ping.py: using LAC 40453
10:58:05.331028 tst                ping_idle_ping.py: using RAC 163
10:58:05.454177 tst                ping_idle_ping.py: using CellId 40453
10:58:05.569196 tst                ping_idle_ping.py: using BVCI 40454
10:58:05.591986 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.603116 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.614041 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.624838 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.635904 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.647408 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.658932 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:58:05.670418 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:58:05.965190 tst             ping_idle_ping.py:24: start network...
10:58:06.099361 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:58:06.623653 run         create_hlr_db(pid=10990): Launched
10:58:06.810872 bus                          /gobi_6: Setting Powered False
10:58:07.833058 run         create_hlr_db(pid=10990): Terminated: ok {rc=0}
10:58:08.264018 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10992): Launched
10:58:08.588435 run   osmo-hlr_10.42.42.2(pid=10993): Launched
10:58:08.708541 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:58:09.271243 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10995): Launched
10:58:09.595065 run   osmo-stp_10.42.42.5(pid=10996): Launched
10:58:09.710900 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:58:10.271133 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10998): Launched
10:58:10.385199 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:58:10.668674 run              patchelf(pid=10999): Launched
10:58:10.857011 run   osmo-stp_10.42.42.5(pid=10996): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10996)]
10:58:10.994809 run   osmo-stp_10.42.42.5(pid=10996): stdout: 
| (launched: 2022-12-14_10:58:09.434579)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:58:11.133503 run   osmo-stp_10.42.42.5(pid=10996): stderr: 
| [0;m[38;5;43m20221214105809625 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214105809625 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214105809625 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214105809625 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105809626 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105809626 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105809626 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:58:11.266370 run   osmo-stp_10.42.42.5(pid=10996): stdout: 
| (launched: 2022-12-14_10:58:09.434579)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:58:11.397817 run   osmo-stp_10.42.42.5(pid=10996): stderr: 
| [0;m[38;5;43m20221214105809625 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214105809625 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214105809625 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214105809625 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105809626 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105809626 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105809626 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:58:11.551797 run              patchelf(pid=10999): Terminating (SIGINT)
10:58:11.732515 run              patchelf(pid=10999): Terminated: ok {rc=0}
10:58:11.765567 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10996): Process ended prematurely: osmo-stp_10.42.42.5(pid=10996) [trial-2403↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10996)]  [trial-2403↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
10:58:11.774926 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
10:58:11.838605 run   osmo-hlr_10.42.42.2(pid=10993): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10993)]
10:58:11.890785 run   osmo-hlr_10.42.42.2(pid=10993): stdout: 
| (launched: 2022-12-14_10:58:08.427389) 
10:58:11.943464 run   osmo-hlr_10.42.42.2(pid=10993): stderr: 
| [0;m[1;31m20221214105808622 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214105808622 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214105808622 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214105808622 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214105808623 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214105808623 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214105808636 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214105808646 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214105808646 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214105808646 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:58:11.988259 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10992): Terminating (SIGTERM)
10:58:12.030547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10995): Terminating (SIGTERM)
10:58:12.073444 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10998): Terminating (SIGTERM)
10:58:12.083252 ---      ParallelTerminationStrategy: PID 10992 died...
10:58:12.140255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10992): Terminated: ok {rc=0}
10:58:12.150603 ---      ParallelTerminationStrategy: PID 10995 died...
10:58:12.206963 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10995): Terminated: ok {rc=0}
10:58:12.217259 ---      ParallelTerminationStrategy: PID 10998 died...
10:58:12.273365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10998): Terminated: ok {rc=0}
10:58:12.360861 bus                          /gobi_6: Setting Powered False
