
----------------------------------------------
trial-2403 gprs:nanobts+band-1900 iperf3m4.py
----------------------------------------------
10:56:36.666677 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:36.678547 tst           gprs:nanobts+band-1900: Using 1 x bts (candidates: 1)
10:56:36.811050 tst                      iperf3m4.py: using LAC 40446
10:56:36.936796 tst                      iperf3m4.py: using RAC 156
10:56:37.068108 tst                      iperf3m4.py: using CellId 40446
10:56:37.193823 tst                      iperf3m4.py: using BVCI 40447
10:56:37.218424 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.229694 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.240631 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.251643 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.262667 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.273790 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.285048 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.296016 tst           gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9)
10:56:37.307239 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
10:56:37.425975 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
10:56:37.544556 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
10:56:37.664176 tst           gprs:nanobts+band-1900: Using 1 x modem (candidates: 4)
10:56:37.944213 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
10:56:38.070843 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:56:38.389159 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10883): Launched
10:56:38.649533 run iperf3-srv_10.42.42.10(pid=10884): Launched
10:56:38.832914 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
10:56:38.958259 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:56:39.271691 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10885): Launched
10:56:39.531870 run iperf3-srv_10.42.42.10(pid=10886): Launched
10:56:39.715211 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
10:56:39.840412 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:56:40.154127 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10887): Launched
10:56:40.416404 run iperf3-srv_10.42.42.10(pid=10888): Launched
10:56:40.599648 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
10:56:40.724882 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:56:41.040401 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10889): Launched
10:56:41.299635 run iperf3-srv_10.42.42.10(pid=10890): Launched
10:56:41.481965 tst                    iperf3m4.py:8: start network...
10:56:41.606673 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:56:42.082150 run         create_hlr_db(pid=10891): Launched
10:56:42.256264 bus                          /gobi_6: Setting Powered False
10:56:43.277746 run         create_hlr_db(pid=10891): Terminated: ok {rc=0}
10:56:43.710986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10893): Launched
10:56:44.033693 run   osmo-hlr_10.42.42.2(pid=10894): Launched
10:56:44.155441 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:56:44.722907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10896): Launched
10:56:45.046807 run   osmo-stp_10.42.42.5(pid=10897): Launched
10:56:45.166452 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:56:45.738449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10899): Launched
10:56:45.856019 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:56:46.182258 run              patchelf(pid=10900): Launched
10:56:46.383744 run   osmo-stp_10.42.42.5(pid=10897): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:nanobts+band-1900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10897)]
10:56:46.543553 run   osmo-stp_10.42.42.5(pid=10897): stdout: 
| (launched: 2022-12-14_10:56:44.886836)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:56:46.696340 run   osmo-stp_10.42.42.5(pid=10897): stderr: 
| [0;m[38;5;43m20221214105645074 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214105645074 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214105645075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214105645075 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105645076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105645076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105645076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:56:46.837860 run   osmo-stp_10.42.42.5(pid=10897): stdout: 
| (launched: 2022-12-14_10:56:44.886836)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:56:46.975072 run   osmo-stp_10.42.42.5(pid=10897): stderr: 
| [0;m[38;5;43m20221214105645074 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214105645074 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214105645075 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214105645075 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214105645076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214105645076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214105645076 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:56:47.135748 run              patchelf(pid=10900): Terminating (SIGINT)
10:56:47.323309 run              patchelf(pid=10900): Terminated: ok {rc=0}
10:56:47.357402 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10897): Process ended prematurely: osmo-stp_10.42.42.5(pid=10897) [trial-2403↪gprs:nanobts+band-1900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10897)]  [trial-2403↪gprs:nanobts+band-1900↪iperf3m4.py:8]
10:56:47.367706 tst                    iperf3m4.py:8: Test FAILED (10.7 sec)
10:56:47.431590 run   osmo-hlr_10.42.42.2(pid=10894): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:nanobts+band-1900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10894)]
10:56:47.484023 run   osmo-hlr_10.42.42.2(pid=10894): stdout: 
| (launched: 2022-12-14_10:56:43.875119) 
10:56:47.537570 run   osmo-hlr_10.42.42.2(pid=10894): stderr: 
| [0;m[1;31m20221214105644068 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214105644069 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214105644069 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214105644069 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214105644069 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214105644069 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214105644081 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-1900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214105644091 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214105644092 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214105644092 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:56:47.582814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10883): Terminating (SIGTERM)
10:56:47.625537 run iperf3-srv_10.42.42.10(pid=10884): Terminating (SIGTERM)
10:56:47.667998 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10885): Terminating (SIGTERM)
10:56:47.710421 run iperf3-srv_10.42.42.10(pid=10886): Terminating (SIGTERM)
10:56:47.753137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10887): Terminating (SIGTERM)
10:56:47.795357 run iperf3-srv_10.42.42.10(pid=10888): Terminating (SIGTERM)
10:56:47.837815 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10889): Terminating (SIGTERM)
10:56:47.880115 run iperf3-srv_10.42.42.10(pid=10890): Terminating (SIGTERM)
10:56:47.922562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10893): Terminating (SIGTERM)
10:56:47.964616 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10896): Terminating (SIGTERM)
10:56:48.006885 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10899): Terminating (SIGTERM)
10:56:48.016301 ---      ParallelTerminationStrategy: PID 10883 died...
10:56:48.072805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10883): Terminated: ok {rc=0}
10:56:48.083154 ---      ParallelTerminationStrategy: PID 10884 died...
10:56:48.139523 run iperf3-srv_10.42.42.10(pid=10884): Terminated {rc=256}
10:56:48.149765 ---      ParallelTerminationStrategy: PID 10885 died...
10:56:48.206207 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10885): Terminated: ok {rc=0}
10:56:48.216329 ---      ParallelTerminationStrategy: PID 10886 died...
10:56:48.272419 run iperf3-srv_10.42.42.10(pid=10886): Terminated {rc=256}
10:56:48.282618 ---      ParallelTerminationStrategy: PID 10887 died...
10:56:48.339012 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10887): Terminated: ok {rc=0}
10:56:48.349304 ---      ParallelTerminationStrategy: PID 10888 died...
10:56:48.405347 run iperf3-srv_10.42.42.10(pid=10888): Terminated {rc=256}
10:56:48.415529 ---      ParallelTerminationStrategy: PID 10889 died...
10:56:48.472430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10889): Terminated: ok {rc=0}
10:56:48.482636 ---      ParallelTerminationStrategy: PID 10890 died...
10:56:48.539300 run iperf3-srv_10.42.42.10(pid=10890): Terminated {rc=256}
10:56:48.549935 ---      ParallelTerminationStrategy: PID 10893 died...
10:56:48.605977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10893): Terminated: ok {rc=0}
10:56:48.616149 ---      ParallelTerminationStrategy: PID 10896 died...
10:56:48.672147 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10896): Terminated: ok {rc=0}
10:56:48.682337 ---      ParallelTerminationStrategy: PID 10899 died...
10:56:48.738683 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10899): Terminated: ok {rc=0}
10:56:48.826209 bus                          /gobi_4: Setting Powered False
10:56:49.933833 bus                          /gobi_4: Setting Powered False
10:56:51.041739 bus                          /gobi_1: Setting Powered False
10:56:52.149177 bus                          /gobi_1: Setting Powered False
10:56:53.256920 bus                          /gobi_0: Setting Powered False
10:56:54.362970 bus                          /gobi_0: Setting Powered False
10:56:55.471496 bus                          /gobi_6: Setting Powered False
