
----------------------------------------------
trial-2403 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
11:05:29.343724 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.355495 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
11:05:29.498224 tst         cs_paging_gprs_active.py: using LAC 40492
11:05:29.626504 tst         cs_paging_gprs_active.py: using RAC 202
11:05:29.751945 tst         cs_paging_gprs_active.py: using CellId 40492
11:05:29.868742 tst         cs_paging_gprs_active.py: using BVCI 40493
11:05:29.891889 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.903335 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.914743 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.926062 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.937567 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.948809 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.960269 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.971515 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
11:05:29.983219 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
11:05:30.101791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
11:05:30.395363 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
11:05:30.529907 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:05:30.879476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11512): Launched
11:05:31.190859 run iperf3-srv_10.42.42.10(pid=11513): Launched
11:05:31.381573 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
11:05:31.512799 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:05:31.854477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11514): Launched
11:05:32.131635 run iperf3-srv_10.42.42.10(pid=11515): Launched
11:05:32.323353 tst      cs_paging_gprs_active.py:38: start network...
11:05:32.452200 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:05:32.932608 run         create_hlr_db(pid=11516): Launched
11:05:33.106565 bus                          /gobi_6: Setting Powered False
11:05:34.127649 run         create_hlr_db(pid=11516): Terminated: ok {rc=0}
11:05:34.532476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11518): Launched
11:05:34.838585 run   osmo-hlr_10.42.42.2(pid=11519): Launched
11:05:34.957112 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:05:35.490012 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11521): Launched
11:05:35.794399 run   osmo-stp_10.42.42.5(pid=11522): Launched
11:05:35.910486 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:05:36.441582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11524): Launched
11:05:36.549371 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:05:36.815828 run              patchelf(pid=11525): Launched
11:05:36.994164 run   osmo-stp_10.42.42.5(pid=11522): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11522)]
11:05:37.124147 run   osmo-stp_10.42.42.5(pid=11522): stdout: 
| (launched: 2022-12-14_11:05:35.643110)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:05:37.254558 run   osmo-stp_10.42.42.5(pid=11522): stderr: 
| [0;m[38;5;43m20221214110535811 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214110535811 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214110535812 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214110535812 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214110535812 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214110535812 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214110535813 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:05:37.379896 run   osmo-stp_10.42.42.5(pid=11522): stdout: 
| (launched: 2022-12-14_11:05:35.643110)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:05:37.504658 run   osmo-stp_10.42.42.5(pid=11522): stderr: 
| [0;m[38;5;43m20221214110535811 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214110535811 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214110535812 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214110535812 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214110535812 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214110535812 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214110535813 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:05:37.649880 run              patchelf(pid=11525): Terminating (SIGINT)
11:05:37.820633 run              patchelf(pid=11525): Terminated: ok {rc=0}
11:05:37.852288 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11522): Process ended prematurely: osmo-stp_10.42.42.5(pid=11522) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11522)]  [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
11:05:37.861783 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
11:05:37.922948 run   osmo-hlr_10.42.42.2(pid=11519): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11519)]
11:05:37.973055 run   osmo-hlr_10.42.42.2(pid=11519): stdout: 
| (launched: 2022-12-14_11:05:34.686714) 
11:05:38.023388 run   osmo-hlr_10.42.42.2(pid=11519): stderr: 
| [0;m[1;31m20221214110534858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214110534858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214110534858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214110534858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214110534858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214110534858 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214110534873 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214110534881 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214110534882 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214110534882 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:05:38.066162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11512): Terminating (SIGTERM)
11:05:38.106503 run iperf3-srv_10.42.42.10(pid=11513): Terminating (SIGTERM)
11:05:38.146684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11514): Terminating (SIGTERM)
11:05:38.186806 run iperf3-srv_10.42.42.10(pid=11515): Terminating (SIGTERM)
11:05:38.227396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11518): Terminating (SIGTERM)
11:05:38.267662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11521): Terminating (SIGTERM)
11:05:38.307857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11524): Terminating (SIGTERM)
11:05:38.317072 ---      ParallelTerminationStrategy: PID 11512 died...
11:05:38.370956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11512): Terminated: ok {rc=0}
11:05:38.380488 ---      ParallelTerminationStrategy: PID 11513 died...
11:05:38.433685 run iperf3-srv_10.42.42.10(pid=11513): Terminated {rc=256}
11:05:38.443084 ---      ParallelTerminationStrategy: PID 11514 died...
11:05:38.496694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11514): Terminated: ok {rc=0}
11:05:38.506117 ---      ParallelTerminationStrategy: PID 11515 died...
11:05:38.560103 run iperf3-srv_10.42.42.10(pid=11515): Terminated {rc=256}
11:05:38.569785 ---      ParallelTerminationStrategy: PID 11518 died...
11:05:38.622792 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11518): Terminated: ok {rc=0}
11:05:38.632250 ---      ParallelTerminationStrategy: PID 11521 died...
11:05:38.685835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11521): Terminated: ok {rc=0}
11:05:38.695349 ---      ParallelTerminationStrategy: PID 11524 died...
11:05:38.748812 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11524): Terminated: ok {rc=0}
11:05:38.838105 bus                          /gobi_0: Setting Powered False
11:05:39.941198 bus                          /gobi_0: Setting Powered False
11:05:41.046911 bus                          /gobi_6: Setting Powered False
