
----------------------------------------------
trial-2403 gprs:nanobts+band-900 iperf3m4.py
----------------------------------------------
11:02:51.206819 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.218337 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
11:02:51.362387 tst                      iperf3m4.py: using LAC 40479
11:02:51.492073 tst                      iperf3m4.py: using RAC 189
11:02:51.625303 tst                      iperf3m4.py: using CellId 40479
11:02:51.748474 tst                      iperf3m4.py: using BVCI 40480
11:02:51.771739 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.782769 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.793675 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.804440 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.815974 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.827613 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.839297 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.850725 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
11:02:51.862263 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
11:02:51.986940 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
11:02:52.107361 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
11:02:52.228641 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
11:02:52.525329 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
11:02:52.661352 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:02:53.001221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11330): Launched
11:02:53.283733 run iperf3-srv_10.42.42.10(pid=11331): Launched
11:02:53.484574 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
11:02:53.620405 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:02:53.960615 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11332): Launched
11:02:54.243851 run iperf3-srv_10.42.42.10(pid=11333): Launched
11:02:54.443832 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
11:02:54.580021 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:02:54.921486 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11334): Launched
11:02:55.203941 run iperf3-srv_10.42.42.10(pid=11335): Launched
11:02:55.404768 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
11:02:55.540937 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:02:55.883224 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11336): Launched
11:02:56.167218 run iperf3-srv_10.42.42.10(pid=11337): Launched
11:02:56.367801 tst                    iperf3m4.py:8: start network...
11:02:56.503751 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:02:57.030134 run         create_hlr_db(pid=11338): Launched
11:02:57.219228 bus                          /gobi_6: Setting Powered False
11:02:58.240909 run         create_hlr_db(pid=11338): Terminated: ok {rc=0}
11:02:58.654344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11340): Launched
11:02:58.964579 run   osmo-hlr_10.42.42.2(pid=11341): Launched
11:02:59.084140 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:02:59.626033 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11343): Launched
11:02:59.935232 run   osmo-stp_10.42.42.5(pid=11344): Launched
11:03:00.046215 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:03:00.583092 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11346): Launched
11:03:00.692377 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:03:00.986544 run              patchelf(pid=11347): Launched
11:03:01.175392 run   osmo-stp_10.42.42.5(pid=11344): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11344)]
11:03:01.310526 run   osmo-stp_10.42.42.5(pid=11344): stdout: 
| (launched: 2022-12-14_11:02:59.781843)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:03:01.448302 run   osmo-stp_10.42.42.5(pid=11344): stderr: 
| [0;m[38;5;43m20221214110259949 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214110259949 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214110259950 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214110259950 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214110259951 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214110259951 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214110259951 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:03:01.579270 run   osmo-stp_10.42.42.5(pid=11344): stdout: 
| (launched: 2022-12-14_11:02:59.781843)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:03:01.708672 run   osmo-stp_10.42.42.5(pid=11344): stderr: 
| [0;m[38;5;43m20221214110259949 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214110259949 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214110259950 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214110259950 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214110259951 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214110259951 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214110259951 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:03:01.859988 run              patchelf(pid=11347): Terminating (SIGINT)
11:03:02.038184 run              patchelf(pid=11347): Terminated: ok {rc=0}
11:03:02.071672 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11344): Process ended prematurely: osmo-stp_10.42.42.5(pid=11344) [trial-2403↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11344)]  [trial-2403↪gprs:nanobts+band-900↪iperf3m4.py:8]
11:03:02.082306 tst                    iperf3m4.py:8: Test FAILED (10.9 sec)
11:03:02.147437 run   osmo-hlr_10.42.42.2(pid=11341): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:nanobts+band-900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11341)]
11:03:02.199042 run   osmo-hlr_10.42.42.2(pid=11341): stdout: 
| (launched: 2022-12-14_11:02:58.809970) 
11:03:02.251415 run   osmo-hlr_10.42.42.2(pid=11341): stderr: 
| [0;m[1;31m20221214110258983 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214110258983 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214110258983 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214110258983 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214110258984 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214110258984 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214110258996 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214110259006 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214110259006 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214110259006 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:03:02.295769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11330): Terminating (SIGTERM)
11:03:02.336708 run iperf3-srv_10.42.42.10(pid=11331): Terminating (SIGTERM)
11:03:02.377647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11332): Terminating (SIGTERM)
11:03:02.418432 run iperf3-srv_10.42.42.10(pid=11333): Terminating (SIGTERM)
11:03:02.459328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11334): Terminating (SIGTERM)
11:03:02.500143 run iperf3-srv_10.42.42.10(pid=11335): Terminating (SIGTERM)
11:03:02.541085 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11336): Terminating (SIGTERM)
11:03:02.581880 run iperf3-srv_10.42.42.10(pid=11337): Terminating (SIGTERM)
11:03:02.622951 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11340): Terminating (SIGTERM)
11:03:02.663833 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11343): Terminating (SIGTERM)
11:03:02.704768 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11346): Terminating (SIGTERM)
11:03:02.714295 ---      ParallelTerminationStrategy: PID 11330 died...
11:03:02.769842 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11330): Terminated: ok {rc=0}
11:03:02.779552 ---      ParallelTerminationStrategy: PID 11331 died...
11:03:02.834577 run iperf3-srv_10.42.42.10(pid=11331): Terminated {rc=256}
11:03:02.844328 ---      ParallelTerminationStrategy: PID 11332 died...
11:03:02.898985 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11332): Terminated: ok {rc=0}
11:03:02.908657 ---      ParallelTerminationStrategy: PID 11333 died...
11:03:02.963278 run iperf3-srv_10.42.42.10(pid=11333): Terminated {rc=256}
11:03:02.972895 ---      ParallelTerminationStrategy: PID 11334 died...
11:03:03.027371 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11334): Terminated: ok {rc=0}
11:03:03.037053 ---      ParallelTerminationStrategy: PID 11335 died...
11:03:03.091687 run iperf3-srv_10.42.42.10(pid=11335): Terminated {rc=256}
11:03:03.101840 ---      ParallelTerminationStrategy: PID 11336 died...
11:03:03.156623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11336): Terminated: ok {rc=0}
11:03:03.166255 ---      ParallelTerminationStrategy: PID 11337 died...
11:03:03.220731 run iperf3-srv_10.42.42.10(pid=11337): Terminated {rc=256}
11:03:03.230415 ---      ParallelTerminationStrategy: PID 11340 died...
11:03:03.285002 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11340): Terminated: ok {rc=0}
11:03:03.294652 ---      ParallelTerminationStrategy: PID 11343 died...
11:03:03.349322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11343): Terminated: ok {rc=0}
11:03:03.359019 ---      ParallelTerminationStrategy: PID 11346 died...
11:03:03.413775 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11346): Terminated: ok {rc=0}
11:03:03.503350 bus                          /gobi_4: Setting Powered False
11:03:04.606947 bus                          /gobi_4: Setting Powered False
11:03:05.719266 bus                          /gobi_1: Setting Powered False
11:03:06.825829 bus                          /gobi_1: Setting Powered False
11:03:07.934980 bus                          /gobi_0: Setting Powered False
11:03:09.043432 bus                          /gobi_0: Setting Powered False
11:03:10.153334 bus                          /gobi_6: Setting Powered False
