
----------------------------------------------
trial-2403 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
10:36:12.831361 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:12.842598 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
10:36:12.981574 tst         cs_paging_gprs_active.py: using LAC 40337
10:36:13.105226 tst         cs_paging_gprs_active.py: using RAC 47
10:36:13.224335 tst         cs_paging_gprs_active.py: using CellId 40337
10:36:13.343353 tst         cs_paging_gprs_active.py: using BVCI 40338
10:36:13.366508 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.377671 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.388655 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.399712 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.411086 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.422450 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.433880 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.445170 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:36:13.456781 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:36:13.578968 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:36:13.858835 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
10:36:13.985313 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:36:14.301692 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8925): Launched
10:36:14.564769 run iperf3-srv_10.42.42.10(pid=8926): Launched
10:36:14.750113 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
10:36:14.876445 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:36:15.193435 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8927): Launched
10:36:15.456471 run iperf3-srv_10.42.42.10(pid=8928): Launched
10:36:15.640916 tst      cs_paging_gprs_active.py:38: start network...
10:36:15.767013 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:36:16.291098 run          create_hlr_db(pid=8929): Launched
10:36:16.470796 bus                          /gobi_6: Setting Powered False
10:36:17.490945 run          create_hlr_db(pid=8929): Terminated: ok {rc=0}
10:36:17.920028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8931): Launched
10:36:18.226428 run    osmo-hlr_10.42.42.2(pid=8932): Launched
10:36:18.340825 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:36:18.869087 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8934): Launched
10:36:19.173787 run    osmo-stp_10.42.42.5(pid=8935): Launched
10:36:19.284176 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:36:19.814452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8937): Launched
10:36:19.922417 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:36:20.189204 run               patchelf(pid=8938): Launched
10:36:20.368145 run    osmo-stp_10.42.42.5(pid=8935): ERR: Terminated: ERROR {rc=1}  [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8935)]
10:36:20.499025 run    osmo-stp_10.42.42.5(pid=8935): stdout: 
| (launched: 2022-12-14_10:36:19.023062)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:36:20.630121 run    osmo-stp_10.42.42.5(pid=8935): stderr: 
| [0;m[38;5;43m20221214103619193 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214103619193 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214103619194 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214103619194 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214103619194 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214103619194 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214103619195 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:36:20.755894 run    osmo-stp_10.42.42.5(pid=8935): stdout: 
| (launched: 2022-12-14_10:36:19.023062)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:36:20.880325 run    osmo-stp_10.42.42.5(pid=8935): stderr: 
| [0;m[38;5;43m20221214103619193 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214103619193 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214103619194 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214103619194 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214103619194 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214103619194 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214103619195 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:36:21.026454 run               patchelf(pid=8938): Terminating (SIGINT)
10:36:21.198000 run               patchelf(pid=8938): Terminated: ok {rc=0}
10:36:21.229741 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8935): Process ended prematurely: osmo-stp_10.42.42.5(pid=8935) [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8935)]  [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
10:36:21.239434 tst      cs_paging_gprs_active.py:38: Test FAILED (8.4 sec)
10:36:21.299999 run    osmo-hlr_10.42.42.2(pid=8932): ERR: Terminated: ERROR {rc=237}  [trial-2403↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8932)]
10:36:21.349513 run    osmo-hlr_10.42.42.2(pid=8932): stdout: 
| (launched: 2022-12-14_10:36:18.075196) 
10:36:21.399770 run    osmo-hlr_10.42.42.2(pid=8932): stderr: 
| [0;m[1;31m20221214103618252 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214103618252 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214103618252 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214103618252 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214103618252 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214103618252 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214103618267 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214103618277 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214103618277 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214103618277 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:36:21.442737 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8925): Terminating (SIGTERM)
10:36:21.483261 run iperf3-srv_10.42.42.10(pid=8926): Terminating (SIGTERM)
10:36:21.523962 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8927): Terminating (SIGTERM)
10:36:21.564298 run iperf3-srv_10.42.42.10(pid=8928): Terminating (SIGTERM)
10:36:21.604778 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8931): Terminating (SIGTERM)
10:36:21.645252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8934): Terminating (SIGTERM)
10:36:21.685876 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8937): Terminating (SIGTERM)
10:36:21.695060 ---      ParallelTerminationStrategy: PID 8925 died...
10:36:21.749499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8925): Terminated: ok {rc=0}
10:36:21.759166 ---      ParallelTerminationStrategy: PID 8926 died...
10:36:21.812930 run iperf3-srv_10.42.42.10(pid=8926): Terminated {rc=256}
10:36:21.822407 ---      ParallelTerminationStrategy: PID 8927 died...
10:36:21.876230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8927): Terminated: ok {rc=0}
10:36:21.885894 ---      ParallelTerminationStrategy: PID 8928 died...
10:36:21.939646 run iperf3-srv_10.42.42.10(pid=8928): Terminated {rc=256}
10:36:21.949350 ---      ParallelTerminationStrategy: PID 8931 died...
10:36:22.003081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8931): Terminated: ok {rc=0}
10:36:22.012676 ---      ParallelTerminationStrategy: PID 8934 died...
10:36:22.066456 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8934): Terminated: ok {rc=0}
10:36:22.076078 ---      ParallelTerminationStrategy: PID 8937 died...
10:36:22.129531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8937): Terminated: ok {rc=0}
10:36:22.213600 bus                          /gobi_0: Setting Powered False
10:36:23.321446 bus                          /gobi_0: Setting Powered False
10:36:24.433212 bus                          /gobi_6: Setting Powered False
