
----------------------------------------------
trial-2404 gprs:nanobts+band-900 iperf3m4.py
----------------------------------------------
12:35:59.332669 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.344648 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
12:35:59.487528 tst                      iperf3m4.py: using LAC 40940
12:35:59.613784 tst                      iperf3m4.py: using RAC 140
12:35:59.740332 tst                      iperf3m4.py: using CellId 40940
12:35:59.870810 tst                      iperf3m4.py: using BVCI 40941
12:35:59.895665 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.907056 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.918184 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.929154 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.940045 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.951095 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.962297 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.973205 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
12:35:59.984281 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
12:36:00.101372 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
12:36:00.223168 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
12:36:00.339997 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
12:36:00.634702 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003...
12:36:00.769973 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:36:01.129973 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22660): Launched
12:36:01.417115 run iperf3-srv_10.42.42.10(pid=22661): Launched
12:36:01.608924 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004...
12:36:01.741413 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:36:02.083954 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22662): Launched
12:36:02.347769 run iperf3-srv_10.42.42.10(pid=22663): Launched
12:36:02.530635 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005...
12:36:02.656043 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:36:02.968072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22664): Launched
12:36:03.227224 run iperf3-srv_10.42.42.10(pid=22665): Launched
12:36:03.409759 tst                    iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006...
12:36:03.534609 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:36:03.846979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22666): Launched
12:36:04.106524 run iperf3-srv_10.42.42.10(pid=22667): Launched
12:36:04.289251 tst                    iperf3m4.py:8: start network...
12:36:04.414474 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:36:04.888913 run         create_hlr_db(pid=22668): Launched
12:36:05.062161 bus                          /gobi_6: Setting Powered False
12:36:06.083981 run         create_hlr_db(pid=22668): Terminated: ok {rc=0}
12:36:06.487013 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22670): Launched
12:36:06.790579 run   osmo-hlr_10.42.42.2(pid=22671): Launched
12:36:06.909408 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:36:07.442760 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22673): Launched
12:36:07.746306 run   osmo-stp_10.42.42.5(pid=22674): Launched
12:36:07.856380 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:36:08.381562 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22676): Launched
12:36:08.488534 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:36:08.751280 run              patchelf(pid=22677): Launched
12:36:08.927727 run   osmo-stp_10.42.42.5(pid=22674): ERR: Terminated: ERROR {rc=1}  [trial-2404↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22674)]
12:36:09.056842 run   osmo-stp_10.42.42.5(pid=22674): stdout: 
| (launched: 2022-12-14_12:36:07.596202)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:36:09.186417 run   osmo-stp_10.42.42.5(pid=22674): stderr: 
| [0;m[38;5;43m20221214123607765 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214123607766 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214123607766 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214123607766 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214123607767 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214123607767 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214123607767 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:36:09.310778 run   osmo-stp_10.42.42.5(pid=22674): stdout: 
| (launched: 2022-12-14_12:36:07.596202)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:36:09.434013 run   osmo-stp_10.42.42.5(pid=22674): stderr: 
| [0;m[38;5;43m20221214123607765 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214123607766 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214123607766 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214123607766 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214123607767 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214123607767 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214123607767 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:36:09.577972 run              patchelf(pid=22677): Terminating (SIGINT)
12:36:09.747628 run              patchelf(pid=22677): Terminated: ok {rc=0}
12:36:09.779101 tst                    iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22674): Process ended prematurely: osmo-stp_10.42.42.5(pid=22674) [trial-2404↪gprs:nanobts+band-900↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22674)]  [trial-2404↪gprs:nanobts+band-900↪iperf3m4.py:8]
12:36:09.788258 tst                    iperf3m4.py:8: Test FAILED (10.5 sec)
12:36:09.848861 run   osmo-hlr_10.42.42.2(pid=22671): ERR: Terminated: ERROR {rc=237}  [trial-2404↪gprs:nanobts+band-900↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22671)]
12:36:09.897738 run   osmo-hlr_10.42.42.2(pid=22671): stdout: 
| (launched: 2022-12-14_12:36:06.640893) 
12:36:09.947256 run   osmo-hlr_10.42.42.2(pid=22671): stderr: 
| [0;m[1;31m20221214123606815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214123606815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214123606815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214123606815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214123606815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214123606815 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214123606827 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:nanobts+band-900/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214123606835 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214123606836 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214123606836 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:36:09.989818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22660): Terminating (SIGTERM)
12:36:10.029726 run iperf3-srv_10.42.42.10(pid=22661): Terminating (SIGTERM)
12:36:10.069795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22662): Terminating (SIGTERM)
12:36:10.109734 run iperf3-srv_10.42.42.10(pid=22663): Terminating (SIGTERM)
12:36:10.149709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22664): Terminating (SIGTERM)
12:36:10.189487 run iperf3-srv_10.42.42.10(pid=22665): Terminating (SIGTERM)
12:36:10.229402 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22666): Terminating (SIGTERM)
12:36:10.269278 run iperf3-srv_10.42.42.10(pid=22667): Terminating (SIGTERM)
12:36:10.309610 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22670): Terminating (SIGTERM)
12:36:10.349399 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22673): Terminating (SIGTERM)
12:36:10.389511 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22676): Terminating (SIGTERM)
12:36:10.398731 ---      ParallelTerminationStrategy: PID 22660 died...
12:36:10.452131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22660): Terminated: ok {rc=0}
12:36:10.461763 ---      ParallelTerminationStrategy: PID 22661 died...
12:36:10.514673 run iperf3-srv_10.42.42.10(pid=22661): Terminated {rc=256}
12:36:10.524149 ---      ParallelTerminationStrategy: PID 22662 died...
12:36:10.576895 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22662): Terminated: ok {rc=0}
12:36:10.586368 ---      ParallelTerminationStrategy: PID 22663 died...
12:36:10.639088 run iperf3-srv_10.42.42.10(pid=22663): Terminated {rc=256}
12:36:10.648668 ---      ParallelTerminationStrategy: PID 22664 died...
12:36:10.701719 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22664): Terminated: ok {rc=0}
12:36:10.711582 ---      ParallelTerminationStrategy: PID 22665 died...
12:36:10.764381 run iperf3-srv_10.42.42.10(pid=22665): Terminated {rc=256}
12:36:10.773960 ---      ParallelTerminationStrategy: PID 22666 died...
12:36:10.827078 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22666): Terminated: ok {rc=0}
12:36:10.836601 ---      ParallelTerminationStrategy: PID 22667 died...
12:36:10.889479 run iperf3-srv_10.42.42.10(pid=22667): Terminated {rc=256}
12:36:10.899039 ---      ParallelTerminationStrategy: PID 22670 died...
12:36:10.952555 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22670): Terminated: ok {rc=0}
12:36:10.962194 ---      ParallelTerminationStrategy: PID 22673 died...
12:36:11.015162 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22673): Terminated: ok {rc=0}
12:36:11.024752 ---      ParallelTerminationStrategy: PID 22676 died...
12:36:11.077839 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22676): Terminated: ok {rc=0}
12:36:11.165578 bus                          /gobi_4: Setting Powered False
12:36:12.267853 bus                          /gobi_4: Setting Powered False
12:36:13.374985 bus                          /gobi_1: Setting Powered False
12:36:14.481192 bus                          /gobi_1: Setting Powered False
12:36:15.588974 bus                          /gobi_0: Setting Powered False
12:36:16.710280 bus                          /gobi_0: Setting Powered False
12:36:17.826004 bus                          /gobi_6: Setting Powered False
