
----------------------------------------------
trial-2404 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py
----------------------------------------------
12:09:32.959257 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:32.970837 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
12:09:33.109163 tst         cs_paging_gprs_active.py: using LAC 40798
12:09:33.232393 tst         cs_paging_gprs_active.py: using RAC 253
12:09:33.351795 tst         cs_paging_gprs_active.py: using CellId 40798
12:09:33.472271 tst         cs_paging_gprs_active.py: using BVCI 40799
12:09:33.495608 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.507109 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.518498 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.529851 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.541663 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.553379 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.565306 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.577028 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
12:09:33.589119 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
12:09:33.713117 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
12:09:33.994529 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
12:09:34.121551 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:09:34.437803 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19993): Launched
12:09:34.701966 run iperf3-srv_10.42.42.10(pid=19994): Launched
12:09:34.887505 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
12:09:35.014215 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:09:35.332904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19995): Launched
12:09:35.595561 run iperf3-srv_10.42.42.10(pid=19996): Launched
12:09:35.780471 tst      cs_paging_gprs_active.py:38: start network...
12:09:35.906881 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:09:36.387012 run         create_hlr_db(pid=19997): Launched
12:09:36.562647 bus                          /gobi_6: Setting Powered False
12:09:37.585239 run         create_hlr_db(pid=19997): Terminated: ok {rc=0}
12:09:38.021678 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19999): Launched
12:09:38.351190 run   osmo-hlr_10.42.42.2(pid=20000): Launched
12:09:38.473100 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:09:39.041419 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20002): Launched
12:09:39.370429 run   osmo-stp_10.42.42.5(pid=20003): Launched
12:09:39.487641 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:09:40.058218 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20005): Launched
12:09:40.174010 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:09:40.458381 run              patchelf(pid=20006): Launched
12:09:40.648239 run   osmo-stp_10.42.42.5(pid=20003): ERR: Terminated: ERROR {rc=1}  [trial-2404↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20003)]
12:09:40.787430 run   osmo-stp_10.42.42.5(pid=20003): stdout: 
| (launched: 2022-12-14_12:09:39.207900)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:09:40.926801 run   osmo-stp_10.42.42.5(pid=20003): stderr: 
| [0;m[38;5;43m20221214120939403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214120939403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214120939403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214120939404 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214120939404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214120939404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214120939404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:09:41.061100 run   osmo-stp_10.42.42.5(pid=20003): stdout: 
| (launched: 2022-12-14_12:09:39.207900)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
12:09:41.194545 run   osmo-stp_10.42.42.5(pid=20003): stderr: 
| [0;m[38;5;43m20221214120939403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214120939403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214120939403 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214120939404 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214120939404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214120939404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214120939404 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
12:09:41.349767 run              patchelf(pid=20006): Terminating (SIGINT)
12:09:41.531653 run              patchelf(pid=20006): Terminated: ok {rc=0}
12:09:41.565102 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20003): Process ended prematurely: osmo-stp_10.42.42.5(pid=20003) [trial-2404↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20003)]  [trial-2404↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38]
12:09:41.575132 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
12:09:41.637893 run   osmo-hlr_10.42.42.2(pid=20000): ERR: Terminated: ERROR {rc=237}  [trial-2404↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20000)]
12:09:41.689385 run   osmo-hlr_10.42.42.2(pid=20000): stdout: 
| (launched: 2022-12-14_12:09:38.187896) 
12:09:41.741449 run   osmo-hlr_10.42.42.2(pid=20000): stderr: 
| [0;m[1;31m20221214120938388 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214120938388 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214120938388 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214120938388 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214120938388 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214120938389 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214120938399 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214120938408 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214120938408 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214120938408 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
12:09:41.785707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19993): Terminating (SIGTERM)
12:09:41.828283 run iperf3-srv_10.42.42.10(pid=19994): Terminating (SIGTERM)
12:09:41.870112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19995): Terminating (SIGTERM)
12:09:41.911794 run iperf3-srv_10.42.42.10(pid=19996): Terminating (SIGTERM)
12:09:41.953632 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19999): Terminating (SIGTERM)
12:09:41.995198 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20002): Terminating (SIGTERM)
12:09:42.036933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20005): Terminating (SIGTERM)
12:09:42.046536 ---      ParallelTerminationStrategy: PID 19993 died...
12:09:42.102751 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19993): Terminated: ok {rc=0}
12:09:42.112809 ---      ParallelTerminationStrategy: PID 19994 died...
12:09:42.168238 run iperf3-srv_10.42.42.10(pid=19994): Terminated {rc=256}
12:09:42.178128 ---      ParallelTerminationStrategy: PID 19995 died...
12:09:42.233340 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19995): Terminated: ok {rc=0}
12:09:42.243208 ---      ParallelTerminationStrategy: PID 19996 died...
12:09:42.298461 run iperf3-srv_10.42.42.10(pid=19996): Terminated {rc=256}
12:09:42.308253 ---      ParallelTerminationStrategy: PID 19999 died...
12:09:42.363636 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19999): Terminated: ok {rc=0}
12:09:42.373603 ---      ParallelTerminationStrategy: PID 20002 died...
12:09:42.428985 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20002): Terminated: ok {rc=0}
12:09:42.438940 ---      ParallelTerminationStrategy: PID 20005 died...
12:09:42.494184 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20005): Terminated: ok {rc=0}
12:09:42.581348 bus                          /gobi_0: Setting Powered False
12:09:43.687717 bus                          /gobi_0: Setting Powered False
12:09:44.796536 bus                          /gobi_6: Setting Powered False
