
----------------------------------------------
trial-2405 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py
----------------------------------------------
13:52:26.343380 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:26.355179 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
13:52:26.517886 tst         cs_paging_gprs_active.py: using LAC 41343
13:52:26.645784 tst         cs_paging_gprs_active.py: using RAC 33
13:52:26.773666 tst         cs_paging_gprs_active.py: using CellId 41343
13:52:26.901804 tst         cs_paging_gprs_active.py: using BVCI 41344
13:52:26.926298 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:26.937714 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:26.948746 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:26.959918 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:26.972044 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:26.984004 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:26.996019 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:27.007764 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:52:27.019767 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
13:52:27.142218 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
13:52:27.436780 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
13:52:27.572526 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:52:27.907630 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29651): Launched
13:52:28.185296 run iperf3-srv_10.42.42.10(pid=29652): Launched
13:52:28.384044 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
13:52:28.519629 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:52:28.854866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29653): Launched
13:52:29.132230 run iperf3-srv_10.42.42.10(pid=29654): Launched
13:52:29.330973 tst      cs_paging_gprs_active.py:38: start network...
13:52:29.466569 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:52:29.974006 run         create_hlr_db(pid=29655): Launched
13:52:30.161542 bus                          /gobi_6: Setting Powered False
13:52:31.173922 run         create_hlr_db(pid=29655): Terminated: ok {rc=0}
13:52:31.612997 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29657): Launched
13:52:32.027178 run   osmo-hlr_10.42.42.2(pid=29658): Launched
13:52:32.225666 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:52:32.791106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29660): Launched
13:52:33.113223 run   osmo-stp_10.42.42.5(pid=29661): Launched
13:52:33.231095 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:52:33.793500 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29663): Launched
13:52:33.908816 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:52:34.197271 run              patchelf(pid=29664): Launched
13:52:34.386484 run   osmo-stp_10.42.42.5(pid=29661): ERR: Terminated: ERROR {rc=1}  [trial-2405↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29661)]
13:52:34.524687 run   osmo-stp_10.42.42.5(pid=29661): stdout: 
| (launched: 2022-12-14_13:52:32.955227)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:52:34.663757 run   osmo-stp_10.42.42.5(pid=29661): stderr: 
| [0;m[38;5;43m20221214135233145 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214135233145 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214135233145 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214135233146 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214135233148 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214135233148 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214135233148 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:52:34.798322 run   osmo-stp_10.42.42.5(pid=29661): stdout: 
| (launched: 2022-12-14_13:52:32.955227)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:52:34.931548 run   osmo-stp_10.42.42.5(pid=29661): stderr: 
| [0;m[38;5;43m20221214135233145 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214135233145 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214135233145 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214135233146 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214135233148 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214135233148 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214135233148 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:52:35.086396 run              patchelf(pid=29664): Terminating (SIGINT)
13:52:35.267666 run              patchelf(pid=29664): Terminated: ok {rc=0}
13:52:35.300902 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29661): Process ended prematurely: osmo-stp_10.42.42.5(pid=29661) [trial-2405↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29661)]  [trial-2405↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38]
13:52:35.310794 tst      cs_paging_gprs_active.py:38: Test FAILED (9.0 sec)
13:52:35.373906 run   osmo-hlr_10.42.42.2(pid=29658): ERR: Terminated: ERROR {rc=237}  [trial-2405↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29658)]
13:52:35.425252 run   osmo-hlr_10.42.42.2(pid=29658): stdout: 
| (launched: 2022-12-14_13:52:31.769300) 
13:52:35.477135 run   osmo-hlr_10.42.42.2(pid=29658): stderr: 
| [0;m[1;31m20221214135232102 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214135232102 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214135232102 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214135232102 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214135232102 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214135232102 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214135232128 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214135232136 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214135232145 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214135232145 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:52:35.521317 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29651): Terminating (SIGTERM)
13:52:35.563113 run iperf3-srv_10.42.42.10(pid=29652): Terminating (SIGTERM)
13:52:35.605050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29653): Terminating (SIGTERM)
13:52:35.646810 run iperf3-srv_10.42.42.10(pid=29654): Terminating (SIGTERM)
13:52:35.688579 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29657): Terminating (SIGTERM)
13:52:35.730458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29660): Terminating (SIGTERM)
13:52:35.772462 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29663): Terminating (SIGTERM)
13:52:35.782170 ---      ParallelTerminationStrategy: PID 29651 died...
13:52:35.838552 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29651): Terminated: ok {rc=0}
13:52:35.848673 ---      ParallelTerminationStrategy: PID 29652 died...
13:52:35.904654 run iperf3-srv_10.42.42.10(pid=29652): Terminated {rc=256}
13:52:35.914629 ---      ParallelTerminationStrategy: PID 29653 died...
13:52:35.970634 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29653): Terminated: ok {rc=0}
13:52:35.980631 ---      ParallelTerminationStrategy: PID 29654 died...
13:52:36.036678 run iperf3-srv_10.42.42.10(pid=29654): Terminated {rc=256}
13:52:36.046849 ---      ParallelTerminationStrategy: PID 29657 died...
13:52:36.102935 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29657): Terminated: ok {rc=0}
13:52:36.113143 ---      ParallelTerminationStrategy: PID 29660 died...
13:52:36.169340 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29660): Terminated: ok {rc=0}
13:52:36.179490 ---      ParallelTerminationStrategy: PID 29663 died...
13:52:36.235544 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29663): Terminated: ok {rc=0}
13:52:36.322801 bus                          /gobi_0: Setting Powered False
13:52:37.425887 bus                          /gobi_0: Setting Powered False
13:52:38.535639 bus                          /gobi_6: Setting Powered False
