Skipping 401 KB..
Full Log /usr/bin/install -c -m 644 RANAP_BroadcastAssistanceDataDecipheringKeys.h RANAP_Cause.h RANAP_CauseMisc.h RANAP_CauseNAS.h RANAP_CauseNon-Standard.h RANAP_CauseProtocol.h RANAP_CauseRadioNetworkExtension.h RANAP_CauseRadioNetwork.h RANAP_CauseTransmissionNetwork.h RANAP_Cell-Access-Mode.h RANAP_CellBased.h RANAP_Cell-Capacity-Class-Value.h RANAP_Cell-Id.h RANAP_CellIdList.h RANAP_CellLoadInformationGroup.h RANAP_CellLoadInformation.h RANAP_CellType.h RANAP_CGI.h RANAP_ChosenEncryptionAlgorithm.h RANAP_ChosenIntegrityProtectionAlgorithm.h RANAP_CI.h RANAP_ClassmarkInformation2.h RANAP_ClassmarkInformation3.h RANAP_ClientType.h RANAP_CN-DeactivateTrace.h RANAP_CN-DomainIndicator.h RANAP_CN-ID.h RANAP_CN-InvokeTrace.h RANAP_CNMBMSLinkingInformation.h RANAP_CommonID.h RANAP_Correlation-ID.h RANAP_CriticalityDiagnostics.h RANAP_CriticalityDiagnostics-IE-List.h RANAP_CriticalityDiagnostics-IE-List-Value.h RANAP_Criticality.h RANAP_CSFB-Information.h RANAP_CSG-Id.h RANAP_CSG-Id-List.h RANAP_CSG-Membership-Status.h RANAP_DataPDUType.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_DataVolumeList.h RANAP_DataVolumeList-Value.h RANAP_DataVolumeReference.h RANAP_DataVolumeReport.h RANAP_DataVolumeReportingIndication.h RANAP_DataVolumeReportList.h RANAP_DataVolumeReportRequest.h RANAP_DCH-ID.h RANAP_DeliveryOfErroneousSDU.h RANAP_DeliveryOrder.h RANAP_DeltaRAListofIdleModeUEs.h RANAP_DirectInformationTransfer.h RANAP_DirectReportingIndicator.h RANAP_DirectTransfer.h RANAP_DirectTransfer-IE-ContainerList.h RANAP_DirectTransferInformationItem-RANAP-RelocInf.h RANAP_DL-GTP-PDU-SequenceNumber.h RANAP_DL-N-PDU-SequenceNumber.h RANAP_D-RNTI.h RANAP_DRX-CycleLengthCoefficient.h RANAP_DSCH-ID.h RANAP_EARFCN-Extended.h RANAP_E-DCH-MAC-d-Flow-ID.h RANAP_ENB-ID.h RANAP_EncryptionAlgorithm.h RANAP_EncryptionInformation.h RANAP_EncryptionKey.h RANAP_End-Of-CSFB.h RANAP_EnhancedRelocationCompleteConfirm.h RANAP_EnhancedRelocationCompleteFailure.h RANAP_EnhancedRelocationCompleteRequest.h RANAP_EnhancedRelocationCompleteResponse.h RANAP_EquipmentsToBeTraced.h RANAP_ErrorIndication.h RANAP_EUTRANFrequencies.h RANAP_EUTRANFrequencies-Value.h RANAP_E-UTRAN-Service-Handover.h RANAP_Event1F-Parameters.h RANAP_Event1I-Parameters.h RANAP_Event.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_ExtendedGuaranteedBitrate.h RANAP_ExtendedMaxBitrate.h RANAP_ExtendedRNC-ID.h RANAP_ForwardingIndication.h RANAP_ForwardSRNS-Context.h RANAP_FrameSequenceNumber.h RANAP_FrequenceLayerConvergenceFlag.h RANAP_GA-AltitudeAndDirection.h RANAP_GA-EllipsoidArc.h RANAP_GANSS-PositioningDataSet.h RANAP_GANSS-PositioningMethodAndUsage.h RANAP_GA-Point.h RANAP_GA-PointWithAltitudeAndUncertaintyEllipsoid.h RANAP_GA-PointWithAltitude.h RANAP_GA-PointWithUnCertaintyEllipse.h RANAP_GA-PointWithUnCertainty.h RANAP_GA-Polygon.h RANAP_GA-Polygon-Value.h RANAP_GA-UncertaintyEllipse.h RANAP_GeographicalArea.h RANAP_GeographicalCoordinates.h RANAP_GERAN-BSC-Container.h RANAP_GERAN-Cell-ID.h RANAP_GERAN-Classmark.h RANAP_GERAN-Iumode-RAB-Failed-RABAssgntResponse-Item.h RANAP_GERAN-Iumode-RAB-Failed-RABAssgntResponse-List.h RANAP_GlobalCN-ID.h RANAP_GlobalRNC-ID.h RANAP_GTP-TEI.h RANAP_GuaranteedBitrate.h RANAP_HigherBitratesThan16MbpsFlag.h RANAP_HorizontalSpeedAndBearing.h RANAP_HorizontalVelocity.h RANAP_HorizontalVelocityWithUncertainty.h RANAP_HorizontalWithVerticalVelocityAndUncertainty.h RANAP_HorizontalWithVerticalVelocity.h RANAP_HS-DSCH-MAC-d-Flow-ID.h RANAP_IE-Extensions.h RANAP_IE.h RANAP_IMEIGroup.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_IMEI.h RANAP_IMEIList.h RANAP_IMEISVGroup.h RANAP_IMEISV.h RANAP_IMEISVList.h RANAP_ImmediateMDT.h RANAP_IMSI.h RANAP_IncludeVelocity.h RANAP_InformationExchangeID.h RANAP_InformationExchangeType.h RANAP_InformationRequested.h RANAP_InformationRequestType.h RANAP_InformationTransferConfirmation.h RANAP_InformationTransferFailure.h RANAP_InformationTransferID.h RANAP_InformationTransferIndication.h RANAP_InformationTransferType.h RANAP_InitialUE-Message.h RANAP_InitiatingMessage.h RANAP_IntegrityProtectionAlgorithm.h RANAP_IntegrityProtectionInformation.h RANAP_IntegrityProtectionKey.h RANAP_InterfacesToTraceItem.h RANAP_InterSystemInformationTransferType.h RANAP_InterSystemInformation-TransparentContainer.h RANAP_IPMulticastAddress.h RANAP_IRAT-Measurement-Configuration.h RANAP_IRATmeasurementParameters.h RANAP_Iu-ReleaseCommand.h RANAP_Iu-ReleaseComplete.h RANAP_Iu-ReleaseRequest.h RANAP_IuSigConId-IE-ContainerList.h RANAP_IuSignallingConnectionIdentifier.h RANAP_IuTransportAssociation.h RANAP_JoinedMBMSBearerService-IEs.h RANAP_JoinedMBMSBearerService-IEs-Value.h RANAP_KeyStatus.h RANAP_L3-Information.h RANAP_LABased.h RANAP_LAC.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_LAI.h RANAP_LAI-List.h RANAP_LA-LIST.h RANAP_LA-LIST-Value.h RANAP_LAListofIdleModeUEs.h RANAP_LastKnownServiceArea.h RANAP_LastVisitedUTRANCell-Item.h RANAP_LeftMBMSBearerService-IEs.h RANAP_LeftMBMSBearerService-IEs-Value.h RANAP_LHN-ID.h RANAP_Links-to-log.h RANAP_ListOfInterfacesToTrace.h RANAP_ListOF-SNAs.h RANAP_LoadValue.h RANAP_LocationRelatedDataFailure.h RANAP_LocationRelatedDataRequest.h RANAP_LocationRelatedDataRequestType.h RANAP_LocationRelatedDataRequestTypeSpecificToGERANIuMode.h RANAP_LocationRelatedDataResponse.h RANAP_LocationReport.h RANAP_LocationReportingControl.h RANAP_LocationReportingTransferInformation.h RANAP_LoggedMDT.h RANAP_LoggingDuration.h RANAP_LoggingInterval.h RANAP_M1Report.h RANAP_M2Report.h RANAP_M4-Collection-Parameters.h RANAP_M4-Period.h RANAP_M4Report.h RANAP_M4-Threshold.h RANAP_M5-Period.h RANAP_M5Report.h RANAP_M6-Period.h RANAP_M6Report.h RANAP_M7-Period.h RANAP_M7Report.h RANAP_Management-Based-MDT-Allowed.h RANAP_MaxBitrate.h RANAP_MaxSDU-Size.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_MBMSBearerServiceType.h RANAP_MBMSCNDe-Registration.h RANAP_MBMSCNDe-RegistrationRequest.h RANAP_MBMSCNDe-RegistrationResponse.h RANAP_MBMSCountingInformation.h RANAP_MBMSHCIndicator.h RANAP_MBMSIPMulticastAddressandAPNlist.h RANAP_MBMSIPMulticastAddressandAPNRequest.h RANAP_MBMSLinkingInformation.h RANAP_MBMS-PTP-RAB-ID.h RANAP_MBMSRABEstablishmentIndication.h RANAP_MBMSRABReleaseFailure.h RANAP_MBMSRABRelease.h RANAP_MBMSRABReleaseRequest.h RANAP_MBMSRegistrationFailure.h RANAP_MBMSRegistrationRequest.h RANAP_MBMSRegistrationRequestType.h RANAP_MBMSRegistrationResponse.h RANAP_MBMSServiceArea.h RANAP_MBMSSessionDuration.h RANAP_MBMSSessionIdentity.h RANAP_MBMSSessionRepetitionNumber.h RANAP_MBMSSessionStartFailure.h RANAP_MBMSSessionStart.h RANAP_MBMSSessionStartResponse.h RANAP_MBMSSessionStop.h RANAP_MBMSSessionStopResponse.h RANAP_MBMSSessionUpdateFailure.h RANAP_MBMSSessionUpdate.h RANAP_MBMSSessionUpdateResponse.h RANAP_MBMSSynchronisationInformation.h RANAP_MBMSUELinkingRequest.h RANAP_MBMSUELinkingResponse.h RANAP_MDT-Activation.h RANAP_MDTAreaScope.h RANAP_MDT-Configuration.h RANAP_MDTMode.h RANAP_MDT-PLMN-List.h RANAP_MDT-Report-Parameters.h RANAP_MeasBand.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_MeasurementQuantity.h RANAP_MeasurementsToActivate.h RANAP_MessageStructure.h RANAP_MessageStructure-Value.h RANAP_MSISDN.h RANAP_NAS-PDU.h RANAP_NAS-SequenceNumber.h RANAP_NAS-SynchronisationIndicator.h RANAP_NewBSS-To-OldBSS-Information.h RANAP_NewRAListofIdleModeUEs.h RANAP_NonSearchingIndication.h RANAP_NotEmptyRAListofIdleModeUEs.h RANAP_NRTLoadInformationValue.h RANAP_NumberOfIuInstances.h RANAP_NumberOfSteps.h RANAP_Offload-RAB-Parameters-APN.h RANAP_Offload-RAB-Parameters-ChargingCharacteristics.h RANAP_Offload-RAB-Parameters.h RANAP_OldBSS-ToNewBSS-Information.h RANAP_OMC-ID.h RANAP_Outcome.h RANAP_Out-Of-UTRAN.h RANAP_Overload.h RANAP_PagingAreaID.h RANAP_PagingCause.h RANAP_Paging.h RANAP_PDP-Type-extension.h RANAP_PDP-Type.h RANAP_PDP-TypeInformation-extension.h RANAP_PDP-TypeInformation.h RANAP_PDUType14FrameSequenceNumber.h RANAP_PeriodicLocationInfo.h RANAP_PeriodicReportingIndicator.h RANAP_PermanentNAS-UE-ID.h RANAP_PermittedEncryptionAlgorithms.h RANAP_PermittedIntegrityProtectionAlgorithms.h RANAP_PLMNidentity.h RANAP_PLMNs-in-shared-network.h RANAP_PLMNs-in-shared-network-Value.h RANAP_Port-Number.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_PositionData.h RANAP_PositionDataSpecificToGERANIuMode.h RANAP_PositioningDataDiscriminator.h RANAP_PositioningDataSet.h RANAP_PositioningMethodAndUsage.h RANAP_PositioningPriority.h RANAP_Pre-emptionCapability.h RANAP_Pre-emptionVulnerability.h RANAP_Presence.h RANAP_Priority-Class-Indicator.h RANAP_PriorityLevel.h RANAP_PrivateIE-ID.h RANAP_PrivateMessage.h RANAP_ProcedureCode.h RANAP_ProtocolError-IE-ContainerList.h RANAP_ProtocolExtensionContainer.h RANAP_ProtocolExtensionField.h RANAP_ProtocolExtensionID.h RANAP_ProtocolIE-Container.h RANAP_ProtocolIE-ContainerPair.h RANAP_ProtocolIE-FieldPair.h RANAP_ProtocolIE-ID.h RANAP_ProvidedData.h RANAP_P-TMSI.h RANAP_QueuingAllowed.h RANAP_RABased.h RANAP_RAB-AssignmentRequest.h RANAP_RAB-AssignmentResponse.h RANAP_RAB-AsymmetryIndicator.h RANAP_RAB-ContextItem.h RANAP_RAB-ContextItem-RANAP-RelocInf.h RANAP_RAB-ContextList.h RANAP_RAB-ContextList-RANAP-RelocInf.h RANAP_RAB-DataForwardingItem.h RANAP_RAB-DataForwardingItem-SRNS-CtxReq.h RANAP_RAB-DataForwardingList.h RANAP_RAB-DataForwardingList-SRNS-CtxReq.h RANAP_RABDataVolumeReport.h RANAP_RABDataVolumeReport-Value.h RANAP_RAB-DataVolumeReportItem.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_RAB-DataVolumeReportList.h RANAP_RAB-DataVolumeReportRequestItem.h RANAP_RAB-DataVolumeReportRequestList.h RANAP_RAB-FailedItem-EnhRelocInfoRes.h RANAP_RAB-FailedItem.h RANAP_RAB-FailedList-EnhRelocInfoRes.h RANAP_RAB-FailedList.h RANAP_RAB-ID.h RANAP_RAB-IE-ContainerList.h RANAP_RAB-IE-ContainerPairList.h RANAP_RAB-ModifyItem.h RANAP_RAB-ModifyList.h RANAP_RAB-ModifyRequest.h RANAP_RAB-Parameter-ExtendedGuaranteedBitrateList.h RANAP_RAB-Parameter-ExtendedMaxBitrateList.h RANAP_RAB-Parameter-GuaranteedBitrateList.h RANAP_RAB-Parameter-MaxBitrateList.h RANAP_RAB-Parameters.h RANAP_RABParametersList.h RANAP_RABParametersList-Value.h RANAP_RAB-QueuedItem.h RANAP_RAB-QueuedList.h RANAP_RAB-ReleasedItem.h RANAP_RAB-ReleasedItem-IuRelComp.h RANAP_RAB-ReleasedList.h RANAP_RAB-ReleasedList-IuRelComp.h RANAP_RAB-ReleaseFailedList.h RANAP_RAB-ReleaseItem.h RANAP_RAB-ReleaseList.h RANAP_RAB-ReleaseRequest.h RANAP_RAB-RelocationReleaseItem.h RANAP_RAB-RelocationReleaseList.h RANAP_RABs-ContextFailedtoTransferItem.h RANAP_RABs-ContextFailedtoTransferList.h RANAP_RAB-SetupItem-EnhancedRelocCompleteReq.h RANAP_RAB-SetupItem-EnhancedRelocCompleteRes.h RANAP_RAB-SetupItem-EnhRelocInfoReq.h RANAP_RAB-SetupItem-EnhRelocInfoRes.h RANAP_RAB-SetupItem-RelocReqAck.h RANAP_RAB-SetupItem-RelocReq.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_RAB-SetupList-EnhancedRelocCompleteReq.h RANAP_RAB-SetupList-EnhancedRelocCompleteRes.h RANAP_RAB-SetupList-EnhRelocInfoReq.h RANAP_RAB-SetupList-EnhRelocInfoRes.h RANAP_RAB-SetupList-RelocReqAck.h RANAP_RAB-SetupList-RelocReq.h RANAP_RAB-SetupOrModifiedItem.h RANAP_RAB-SetupOrModifiedList.h RANAP_RAB-SetupOrModifyItemFirst.h RANAP_RAB-SetupOrModifyItemSecond.h RANAP_RAB-SetupOrModifyList.h RANAP_RABs-failed-to-reportItem.h RANAP_RABs-failed-to-reportList.h RANAP_RAB-SubflowCombinationBitRate.h RANAP_RAB-ToBeReleasedItem-EnhancedRelocCompleteRes.h RANAP_RAB-ToBeReleasedList-EnhancedRelocCompleteRes.h RANAP_RAB-TrCH-Mapping.h RANAP_RAB-TrCH-MappingItem.h RANAP_RAC.h RANAP_RAI.h RANAP_RAI-List.h RANAP_RAListofIdleModeUEs.h RANAP_RAListwithNoIdleModeUEsAnyMore.h RANAP_RANAP-EnhancedRelocationInformationRequest.h RANAP_RANAP-EnhancedRelocationInformationResponse.h RANAP_RANAP-PDU.h RANAP_RANAP-RelocationInformation.h RANAP_RAofIdleModeUEs.h RANAP_RateControlAllowed.h RANAP_RAT-Type.h RANAP_RedirectAttemptFlag.h RANAP_RedirectionCompleted.h RANAP_RedirectionIndication.h RANAP_RejectCauseValue.h RANAP_RelocationCancelAcknowledge.h RANAP_RelocationCancel.h RANAP_RelocationCommand.h RANAP_RelocationComplete.h RANAP_RelocationDetect.h RANAP_RelocationFailure.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_RelocationPreparationFailure.h RANAP_RelocationRequestAcknowledge.h RANAP_RelocationRequest.h RANAP_RelocationRequired.h RANAP_RelocationRequirement.h RANAP_RelocationType.h RANAP_RepetitionNumber0.h RANAP_RepetitionNumber1.h RANAP_ReportAmount.h RANAP_ReportArea.h RANAP_ReportChangeOfSAI.h RANAP_ReportInterval.h RANAP_RequestedGANSSAssistanceData.h RANAP_RequestedGPSAssistanceData.h RANAP_RequestedLocationRelatedDataType.h RANAP_RequestedMBMSIPMulticastAddressandAPNRequest.h RANAP_RequestedMulticastServiceList.h RANAP_Requested-RAB-Parameter-ExtendedGuaranteedBitrateList.h RANAP_Requested-RAB-Parameter-ExtendedMaxBitrateList.h RANAP_Requested-RAB-Parameter-GuaranteedBitrateList.h RANAP_Requested-RAB-Parameter-MaxBitrateList.h RANAP_Requested-RAB-Parameter-Values.h RANAP_RequestType.h RANAP_ResetAcknowledge.h RANAP_Reset.h RANAP_ResetResourceAckItem.h RANAP_ResetResourceAckList.h RANAP_ResetResourceAcknowledge.h RANAP_ResetResource.h RANAP_ResetResourceItem.h RANAP_ResetResourceList.h RANAP_ResidualBitErrorRatio.h RANAP_ResponseTime.h RANAP_RIMInformation.h RANAP_RIMRoutingAddress.h RANAP_RIM-Transfer.h RANAP_RNC-ID.h RANAP_RNCTraceInformation.h RANAP_RNSAPRelocationParameters.h RANAP_RRC-Container.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_RSRQ-Extension.h RANAP_RSRQ-Type.h RANAP_RSRVCC-HO-Indication.h RANAP_RSRVCC-Information.h RANAP_RSRVCC-Operation-Possible.h RANAP_RTLoadValue.h RANAP_SAC.h RANAP_SAI.h RANAP_SAPI.h RANAP_SDU-ErrorRatio.h RANAP_SDU-FormatInformationParameterItem.h RANAP_SDU-FormatInformationParameters.h RANAP_SDU-ParameterItem.h RANAP_SDU-Parameters.h RANAP_SecurityModeCommand.h RANAP_SecurityModeComplete.h RANAP_SecurityModeReject.h RANAP_Service-Handover.h RANAP_Session-Re-establishment-Indicator.h RANAP_SessionUpdateID.h RANAP_Shared-Network-Information.h RANAP_SignallingIndication.h RANAP_SNA-Access-Information.h RANAP_SNAC.h RANAP_SourceBSS-ToTargetBSS-TransparentContainer.h RANAP_SourceCellID.h RANAP_SourceeNodeB-ToTargeteNodeB-TransparentContainer.h RANAP_SourceID.h RANAP_SourceRNC-ID.h RANAP_SourceRNC-ToTargetRNC-TransparentContainer.h RANAP_SourceStatisticsDescriptor.h RANAP_Source-ToTarget-TransparentContainer.h RANAP_SourceUTRANCellID.h RANAP_SRB-ID.h RANAP_SRB-TrCH-Mapping.h RANAP_SRB-TrCH-MappingItem.h RANAP_SRNS-ContextRequest.h RANAP_SRNS-ContextResponse.h RANAP_SRNS-DataForwardCommand.h RANAP_SRVCC-CSKeysRequest.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_SRVCC-CSKeysResponse.h RANAP_SRVCC-HO-Indication.h RANAP_SRVCC-Information.h RANAP_SRVCC-Operation-Possible.h RANAP_SubflowSDU-Size.h RANAP_SubscriberProfileIDforRFP.h RANAP_SuccessfulOutcome.h RANAP_SupportedBitrate.h RANAP_SupportedRAB-ParameterBitrateList.h RANAP_TAC.h RANAP_TAI.h RANAP_TargetBSS-ToSourceBSS-TransparentContainer.h RANAP_TargetCellId.h RANAP_TargetENB-ID.h RANAP_TargeteNodeB-ToSourceeNodeB-TransparentContainer.h RANAP_TargetID.h RANAP_TargetRNC-ID.h RANAP_TargetRNC-ToSourceRNC-TransparentContainer.h RANAP_Target-ToSource-TransparentContainer.h RANAP_TBCD-STRING.h RANAP_TemporaryUE-ID.h RANAP_TimeToMBMSDataTransfer.h RANAP_Time-UE-StayedInCell-EnhancedGranularity.h RANAP_Time-UE-StayedInCell.h RANAP_TimingDifferenceULDL.h RANAP_TMGI.h RANAP_TMSI.h RANAP_TNLInformationEnhRelInfoReq.h RANAP_TNLInformationEnhRelInfoRes.h RANAP_TraceDepth.h RANAP_TraceInformation.h RANAP_TracePropagationParameters.h RANAP_TraceRecordingSessionInformation.h RANAP_TraceRecordingSessionReference.h RANAP_TraceReference.h RANAP_TraceType.h RANAP_TrafficClass.h RANAP_TrafficHandlingPriority.h RANAP_TransferDelay.h RANAP_TransportLayerAddress.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
/usr/bin/install -c -m 644 RANAP_TransportLayerInformation.h RANAP_TrCH-ID.h RANAP_TrCH-ID-List.h RANAP_TriggerID.h RANAP_TriggeringMessage.h RANAP_TunnelInformation.h RANAP_TypeOfError.h RANAP_UE-AggregateMaximumBitRateDownlink.h RANAP_UE-AggregateMaximumBitRate.h RANAP_UE-AggregateMaximumBitRateUplink.h RANAP_UE-History-Information.h RANAP_UE-ID.h RANAP_UeRadioCapabilityMatchRequest.h RANAP_UeRadioCapabilityMatchResponse.h RANAP_UESBI-IuA.h RANAP_UESBI-IuB.h RANAP_UESBI-Iu.h RANAP_UESpecificInformationIndication.h RANAP_UL-GTP-PDU-SequenceNumber.h RANAP_UL-N-PDU-SequenceNumber.h RANAP_UnsuccessfulLinking-IEs.h RANAP_UnsuccessfulLinking-IEs-Value.h RANAP_UnsuccessfullyTransmittedDataVolume.h RANAP_UnsuccessfulOutcome.h RANAP_UPInformation.h RANAP_UPInitialisationFrame.h RANAP_UplinkInformationExchangeFailure.h RANAP_UplinkInformationExchangeRequest.h RANAP_UplinkInformationExchangeResponse.h RANAP_UP-ModeVersions.h RANAP_USCH-ID.h RANAP_UserPlaneInformation.h RANAP_UserPlaneMode.h RANAP_UTRAN-CellID.h RANAP_VelocityEstimate.h RANAP_VerticalAccuracyCode.h RANAP_VerticalSpeedDirection.h RANAP_VerticalVelocity.h RANAP_VoiceSupportMatchIndicator.h '/build/deps/install/stow/osmo-iuh/include/osmocom/ranap'
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/ranap'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/ranap'
Making install in rua
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom/rua'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom/rua'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-iuh/include/osmocom/rua'
/usr/bin/install -c -m 644 rua_common.h rua_ies_defs.h rua_msg_factory.h RUA_Ansi-41-IDNNS.h RUA_Cause.h RUA_CauseMisc.h RUA_CauseProtocol.h RUA_CauseRadioNetwork.h RUA_CauseTransport.h RUA_CN-DomainIndicator.h RUA_Connect.h RUA_ConnectionlessTransfer.h RUA_Context-ID.h RUA_CriticalityDiagnostics.h RUA_CriticalityDiagnostics-IE-List.h RUA_CriticalityDiagnostics-IE-List-Value.h RUA_Criticality.h RUA_CSGMembershipStatus.h RUA_DirectTransfer.h RUA_Disconnect.h RUA_ErrorIndication.h RUA_Establishment-Cause.h RUA_Gsm-map-IDNNS.h RUA_IE-Extensions.h RUA_IE.h RUA_InitiatingMessage.h RUA_IntraDomainNasNodeSelector.h RUA_Presence.h RUA_PrivateIE-ID.h RUA_PrivateMessage.h RUA_ProcedureCode.h RUA_ProtocolIE-ID.h RUA_RANAP-Message.h RUA_RoutingParameter.h RUA_RUA-PDU.h RUA_SuccessfulOutcome.h RUA_TriggeringMessage.h RUA_TypeOfError.h RUA_UnsuccessfulOutcome.h '/build/deps/install/stow/osmo-iuh/include/osmocom/rua'
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/rua'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/rua'
Making install in sabp
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom/sabp'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom/sabp'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-iuh/include/osmocom/sabp'
/usr/bin/install -c -m 644 sabp_ies_defs.h sabp_common.h SABP_InitiatingMessage.h SABP_SABP-PDU.h SABP_SuccessfulOutcome.h SABP_UnsuccessfulOutcome.h SABP_Criticality.h SABP_Presence.h SABP_ProcedureCode.h SABP_ProtocolExtensionID.h SABP_ProtocolIE-ID.h SABP_TriggeringMessage.h SABP_IE-Extensions.h SABP_Available-Bandwidth.h SABP_Broadcast-Message-Content.h SABP_Broadcast-Message-Content-Validity-Indicator.h SABP_Category.h SABP_Cause.h SABP_Criticality-Diagnostics.h SABP_CriticalityDiagnostics-IE-List.h SABP_CriticalityDiagnostics-IE-List-Value.h SABP_MessageStructure.h SABP_MessageStructure-Value.h SABP_Data-Coding-Scheme.h SABP_Failure-List.h SABP_Failure-List-Item.h SABP_Message-Identifier.h SABP_New-Serial-Number.h SABP_Number-of-Broadcasts-Completed-List.h SABP_Number-of-Broadcasts-Completed-List-Item.h SABP_Number-Of-Broadcasts-Completed-Info.h SABP_Number-of-Broadcasts-Requested.h SABP_Old-Serial-Number.h SABP_Paging-ETWS-Indicator.h SABP_Radio-Resource-Loading-List.h SABP_Radio-Resource-Loading-List-Item.h SABP_Recovery-Indication.h SABP_RepetitionNumber0.h SABP_RepetitionNumber1.h SABP_Repetition-Period.h '/build/deps/install/stow/osmo-iuh/include/osmocom/sabp'
/usr/bin/install -c -m 644 SABP_Serial-Number.h SABP_Service-Area-Identifier.h SABP_Service-Areas-List.h SABP_TypeOfError.h SABP_WarningSecurityInfo.h SABP_Warning-Type.h SABP_Write-Replace.h SABP_Write-Replace-Complete.h SABP_Write-Replace-Failure.h SABP_Kill.h SABP_Kill-Complete.h SABP_Kill-Failure.h SABP_Load-Query.h SABP_Load-Query-Complete.h SABP_Load-Query-Failure.h SABP_Message-Status-Query.h SABP_Message-Status-Query-Complete.h SABP_Message-Status-Query-Failure.h SABP_Reset.h SABP_Reset-Complete.h SABP_Reset-Failure.h SABP_Restart.h SABP_Failure.h SABP_Error-Indication.h SABP_IE.h '/build/deps/install/stow/osmo-iuh/include/osmocom/sabp'
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/sabp'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/sabp'
Making install in iuh
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom/iuh'
make[4]: Entering directory '/build/deps/osmo-iuh/include/osmocom'
make[5]: Entering directory '/build/deps/osmo-iuh/include/osmocom'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/deps/osmo-iuh/include/osmocom'
make[4]: Leaving directory '/build/deps/osmo-iuh/include/osmocom'
make[3]: Leaving directory '/build/deps/osmo-iuh/include/osmocom'
make[3]: Entering directory '/build/deps/osmo-iuh/include'
make[4]: Entering directory '/build/deps/osmo-iuh/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-iuh/include'
make[3]: Leaving directory '/build/deps/osmo-iuh/include'
make[2]: Leaving directory '/build/deps/osmo-iuh/include'
Making install in doc
make[2]: Entering directory '/build/deps/osmo-iuh/doc'
make[3]: Entering directory '/build/deps/osmo-iuh/doc'
make[4]: Entering directory '/build/deps/osmo-iuh/doc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-iuh/doc'
make[3]: Leaving directory '/build/deps/osmo-iuh/doc'
make[2]: Leaving directory '/build/deps/osmo-iuh/doc'
Making install in tests
make[2]: Entering directory '/build/deps/osmo-iuh/tests'
make[3]: Entering directory '/build/deps/osmo-iuh/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/deps/osmo-iuh/tests'
make[2]: Leaving directory '/build/deps/osmo-iuh/tests'
make[2]: Entering directory '/build/deps/osmo-iuh'
make[3]: Entering directory '/build/deps/osmo-iuh'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-iuh/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmo-hnbap.pc libosmo-ranap.pc libosmo-rua.pc libosmo-sabp.pc '/build/deps/install/stow/osmo-iuh/lib/pkgconfig'
make[3]: Leaving directory '/build/deps/osmo-iuh'
make[2]: Leaving directory '/build/deps/osmo-iuh'
make[1]: Leaving directory '/build/deps/osmo-iuh'
+ STOW_DIR=/build/deps/install/stow stow --restow osmo-iuh
+ osmo-build-dep.sh osmo-mgw
+ mkdir -p /build/deps
=============================== osmo-mgw ===============================
+ cd /build/deps
+ osmo-deps.sh osmo-mgw
+ project=osmo-mgw
+ branch=master
+ git branch -a
+ grep -c remotes/origin/master$
+ [ x1 != x0 ]
+ branch=origin/master
+ test -d osmo-mgw
+ cd osmo-mgw
+ git fetch --tags origin
+ git fetch origin
+ deps= osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
+ [ -d ]
+ [ -d layer1-headers ]
+ git checkout -f origin/master
HEAD is now at fa393fa1e doc: example configs: fix deprecation warnings
+ git rev-parse HEAD
fa393fa1e9bd75047f48eeea42d20f8c61f8866b
+ cd osmo-mgw
+ mkdir -p /build/deps/install/stow
+ osmo_source_subdir osmo-mgw
+ subdir=
+ [ -n ]
+ autoreconf --install --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
configure.ac:93: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:93: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:93: the top level
configure.ac:105: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:105: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:105: the top level
configure.ac:110: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:110: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:110: the top level
configure.ac:186: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:186: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:186: the top level
configure.ac:188: warning: AC_OUTPUT should be used without arguments.
configure.ac:188: You should run autoupdate.
configure.ac:23: installing './compile'
configure.ac:25: installing './config.guess'
configure.ac:25: installing './config.sub'
configure.ac:9: installing './install-sh'
configure.ac:9: installing './missing'
src/libosmo-mgcp-client/Makefile.am: installing './depcomp'
+ ./configure --prefix=/build/deps/install/stow/osmo-mgw --with-systemdsystemunitdir=/build/deps/install/stow/osmo-mgw/lib/systemd/system
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for library containing dlopen... none required
checking for library containing dlsym... none required
checking for libosmocore >= 1.9.0... yes
checking for libosmogsm >= 1.9.0... yes
checking for libosmoctrl >= 1.9.0... yes
checking for libosmovty >= 1.9.0... yes
checking for libosmo-netif >= 1.4.0... yes
checking for libosmoabis >= 1.5.0... yes
checking for libosmotrau >= 1.5.0... yes
checking whether to enable code coverage support... no
checking whether to enable VTY/CTRL tests... no
CFLAGS=" -std=gnu11 -DBUILDING_LIBOSMOMGCPCLIENT -pthread"
CPPFLAGS=" -DBUILDING_LIBOSMOMGCPCLIENT -pthread"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmo-mgcp-client.pc
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/mgcp_client/Makefile
config.status: creating include/osmocom/mgcp/Makefile
config.status: creating src/Makefile
config.status: creating src/libosmo-mgcp-client/Makefile
config.status: creating src/libosmo-mgcp/Makefile
config.status: creating src/osmo-mgw/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating tests/mgcp_client/Makefile
config.status: creating tests/mgcp/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating bscconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ [ -n ]
+ make -j 12 install
echo 1.12.1.50-fa393 > .version-t && mv .version-t .version
make install-recursive
make[1]: Entering directory '/build/deps/osmo-mgw'
Making install in include
make[2]: Entering directory '/build/deps/osmo-mgw/include'
Making install in osmocom
make[3]: Entering directory '/build/deps/osmo-mgw/include/osmocom'
Making install in mgcp_client
make[4]: Entering directory '/build/deps/osmo-mgw/include/osmocom/mgcp_client'
echo -e "/*\n\n DO NOT EDIT THIS FILE!\n THIS IS OVERWRITTEN DURING BUILD\n This is an automatic copy of <osmocom/mgcp/mgcp_common.h>\n\n */" > mgcp_common.h
cat ../../../include/osmocom/mgcp/mgcp_common.h >> mgcp_common.h
make install-am
make[5]: Entering directory '/build/deps/osmo-mgw/include/osmocom/mgcp_client'
make[6]: Entering directory '/build/deps/osmo-mgw/include/osmocom/mgcp_client'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/deps/osmo-mgw/include/osmocom/mgcp_client'
make[5]: Leaving directory '/build/deps/osmo-mgw/include/osmocom/mgcp_client'
make[4]: Leaving directory '/build/deps/osmo-mgw/include/osmocom/mgcp_client'
Making install in mgcp
make[4]: Entering directory '/build/deps/osmo-mgw/include/osmocom/mgcp'
make[5]: Entering directory '/build/deps/osmo-mgw/include/osmocom/mgcp'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/deps/osmo-mgw/include/osmocom/mgcp'
make[4]: Leaving directory '/build/deps/osmo-mgw/include/osmocom/mgcp'
make[4]: Entering directory '/build/deps/osmo-mgw/include/osmocom'
make[5]: Entering directory '/build/deps/osmo-mgw/include/osmocom'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/deps/osmo-mgw/include/osmocom'
make[4]: Leaving directory '/build/deps/osmo-mgw/include/osmocom'
make[3]: Leaving directory '/build/deps/osmo-mgw/include/osmocom'
make[3]: Entering directory '/build/deps/osmo-mgw/include'
make[4]: Entering directory '/build/deps/osmo-mgw/include'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/include'
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/include'
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client'
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client'
/usr/bin/install -c -m 644 osmocom/mgcp_client/defs.h osmocom/mgcp_client/mgcp_client.h osmocom/mgcp_client/mgcp_client_endpoint_fsm.h osmocom/mgcp_client/mgcp_client_fsm.h osmocom/mgcp_client/mgcp_client_pool.h '/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client'
/usr/bin/install -c -m 644 osmocom/mgcp_client/mgcp_common.h '/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client'
make[4]: Leaving directory '/build/deps/osmo-mgw/include'
make[3]: Leaving directory '/build/deps/osmo-mgw/include'
make[2]: Leaving directory '/build/deps/osmo-mgw/include'
Making install in src
make[2]: Entering directory '/build/deps/osmo-mgw/src'
Making install in libosmo-mgcp-client
make[3]: Entering directory '/build/deps/osmo-mgw/src/libosmo-mgcp-client'
CC mgcp_client.lo
CC mgcp_client_vty.lo
CC mgcp_client_fsm.lo
CC mgcp_client_endpoint_fsm.lo
CC mgcp_client_pool.lo
CCLD libosmo-mgcp-client.la
make[4]: Entering directory '/build/deps/osmo-mgw/src/libosmo-mgcp-client'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmo-mgcp-client.la '/build/deps/install/stow/osmo-mgw/lib'
libtool: install: /usr/bin/install -c .libs/libosmo-mgcp-client.so.12.1.0 /build/deps/install/stow/osmo-mgw/lib/libosmo-mgcp-client.so.12.1.0
libtool: install: (cd /build/deps/install/stow/osmo-mgw/lib && { ln -s -f libosmo-mgcp-client.so.12.1.0 libosmo-mgcp-client.so.12 || { rm -f libosmo-mgcp-client.so.12 && ln -s libosmo-mgcp-client.so.12.1.0 libosmo-mgcp-client.so.12; }; })
libtool: install: (cd /build/deps/install/stow/osmo-mgw/lib && { ln -s -f libosmo-mgcp-client.so.12.1.0 libosmo-mgcp-client.so || { rm -f libosmo-mgcp-client.so && ln -s libosmo-mgcp-client.so.12.1.0 libosmo-mgcp-client.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmo-mgcp-client.lai /build/deps/install/stow/osmo-mgw/lib/libosmo-mgcp-client.la
libtool: install: /usr/bin/install -c .libs/libosmo-mgcp-client.a /build/deps/install/stow/osmo-mgw/lib/libosmo-mgcp-client.a
libtool: install: chmod 644 /build/deps/install/stow/osmo-mgw/lib/libosmo-mgcp-client.a
libtool: install: ranlib /build/deps/install/stow/osmo-mgw/lib/libosmo-mgcp-client.a
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/osmo-mgw/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/osmo-mgw/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/osmo-mgw/src/libosmo-mgcp-client'
make[3]: Leaving directory '/build/deps/osmo-mgw/src/libosmo-mgcp-client'
Making install in libosmo-mgcp
make[3]: Entering directory '/build/deps/osmo-mgw/src/libosmo-mgcp'
CC mgcp_protocol.o
CC mgcp_network.o
CC mgcp_osmux.o
CC mgcp_vty.o
CC mgcp_codec.o
CC mgcp_sdp.o
CC mgcp_msg.o
CC mgcp_conn.o
CC mgcp_stat.o
CC mgcp_endp.o
CC mgcp_trunk.o
CC mgcp_ratectr.o
CC mgcp_e1.o
CC mgcp_iuup.o
AR libosmo-mgcp.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[4]: Entering directory '/build/deps/osmo-mgw/src/libosmo-mgcp'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/src/libosmo-mgcp'
make[3]: Leaving directory '/build/deps/osmo-mgw/src/libosmo-mgcp'
Making install in osmo-mgw
make[3]: Entering directory '/build/deps/osmo-mgw/src/osmo-mgw'
CC mgw_main.o
CCLD osmo-mgw
make[4]: Entering directory '/build/deps/osmo-mgw/src/osmo-mgw'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-mgw '/build/deps/install/stow/osmo-mgw/bin'
libtool: install: /usr/bin/install -c osmo-mgw /build/deps/install/stow/osmo-mgw/bin/osmo-mgw
make[4]: Leaving directory '/build/deps/osmo-mgw/src/osmo-mgw'
make[3]: Leaving directory '/build/deps/osmo-mgw/src/osmo-mgw'
make[3]: Entering directory '/build/deps/osmo-mgw/src'
make[4]: Entering directory '/build/deps/osmo-mgw/src'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/src'
make[3]: Leaving directory '/build/deps/osmo-mgw/src'
make[2]: Leaving directory '/build/deps/osmo-mgw/src'
Making install in tests
make[2]: Entering directory '/build/deps/osmo-mgw/tests'
Making install in mgcp_client
make[3]: Entering directory '/build/deps/osmo-mgw/tests/mgcp_client'
make[4]: Entering directory '/build/deps/osmo-mgw/tests/mgcp_client'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/tests/mgcp_client'
make[3]: Leaving directory '/build/deps/osmo-mgw/tests/mgcp_client'
Making install in mgcp
make[3]: Entering directory '/build/deps/osmo-mgw/tests/mgcp'
make[4]: Entering directory '/build/deps/osmo-mgw/tests/mgcp'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/tests/mgcp'
make[3]: Leaving directory '/build/deps/osmo-mgw/tests/mgcp'
make[3]: Entering directory '/build/deps/osmo-mgw/tests'
make[4]: Entering directory '/build/deps/osmo-mgw/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/tests'
make[3]: Leaving directory '/build/deps/osmo-mgw/tests'
make[2]: Leaving directory '/build/deps/osmo-mgw/tests'
Making install in doc
make[2]: Entering directory '/build/deps/osmo-mgw/doc'
Making install in examples
make[3]: Entering directory '/build/deps/osmo-mgw/doc/examples'
make[4]: Entering directory '/build/deps/osmo-mgw/doc/examples'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/etc/osmocom'
/usr/bin/install -c -m 644 osmo-mgw/osmo-mgw.cfg '/build/deps/install/stow/osmo-mgw/etc/osmocom'
make install-data-hook
make[5]: Entering directory '/build/deps/osmo-mgw/doc/examples'
for f in $(find . -name '*.cfg*' | sed -e 's,^.,,'); do \
j="/build/deps/install/stow/osmo-mgw/share/doc/osmo-mgw/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ./$f $j; \
done
make[5]: Leaving directory '/build/deps/osmo-mgw/doc/examples'
make[4]: Leaving directory '/build/deps/osmo-mgw/doc/examples'
make[3]: Leaving directory '/build/deps/osmo-mgw/doc/examples'
Making install in manuals
make[3]: Entering directory '/build/deps/osmo-mgw/doc/manuals'
make[4]: Entering directory '/build/deps/osmo-mgw/doc/manuals'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/doc/manuals'
make[3]: Leaving directory '/build/deps/osmo-mgw/doc/manuals'
make[3]: Entering directory '/build/deps/osmo-mgw/doc'
make[4]: Entering directory '/build/deps/osmo-mgw/doc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/doc'
make[3]: Leaving directory '/build/deps/osmo-mgw/doc'
make[2]: Leaving directory '/build/deps/osmo-mgw/doc'
Making install in contrib
make[2]: Entering directory '/build/deps/osmo-mgw/contrib'
Making install in systemd
make[3]: Entering directory '/build/deps/osmo-mgw/contrib/systemd'
make[4]: Entering directory '/build/deps/osmo-mgw/contrib/systemd'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/lib/systemd/system'
/usr/bin/install -c -m 644 osmo-mgw.service '/build/deps/install/stow/osmo-mgw/lib/systemd/system'
make[4]: Leaving directory '/build/deps/osmo-mgw/contrib/systemd'
make[3]: Leaving directory '/build/deps/osmo-mgw/contrib/systemd'
make[3]: Entering directory '/build/deps/osmo-mgw/contrib'
make[4]: Entering directory '/build/deps/osmo-mgw/contrib'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/osmo-mgw/contrib'
make[3]: Leaving directory '/build/deps/osmo-mgw/contrib'
make[2]: Leaving directory '/build/deps/osmo-mgw/contrib'
make[2]: Entering directory '/build/deps/osmo-mgw'
make[3]: Entering directory '/build/deps/osmo-mgw'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/osmo-mgw/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmo-mgcp-client.pc '/build/deps/install/stow/osmo-mgw/lib/pkgconfig'
make[3]: Leaving directory '/build/deps/osmo-mgw'
make[2]: Leaving directory '/build/deps/osmo-mgw'
make[1]: Leaving directory '/build/deps/osmo-mgw'
+ STOW_DIR=/build/deps/install/stow stow --restow osmo-mgw
+ CONFIG=
+ '[' 0 = 1 ']'
+ '[' 0 = 1 ']'
+ '[' 0 = 1 ']'
+ set +x
=============================== osmo-hnbgw ===============================
+ cd /build
+ autoreconf --install --force
aclocal: warning: couldn't open directory 'm4': No such file or directory
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
configure.ac:84: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:84: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:84: the top level
configure.ac:132: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:132: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:132: the top level
configure.ac:153: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:153: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:153: the top level
configure.ac:232: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:232: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:232: the top level
configure.ac:234: warning: AC_OUTPUT should be used without arguments.
configure.ac:234: You should run autoupdate.
configure.ac:23: installing './compile'
configure.ac:25: installing './config.guess'
configure.ac:25: installing './config.sub'
configure.ac:9: installing './install-sh'
configure.ac:9: installing './missing'
doc/charts/Makefile.am:10: warning: '%'-style pattern rules are a GNU make extension
doc/charts/Makefile.am:13: warning: '%'-style pattern rules are a GNU make extension
doc/charts/Makefile.am:18: warning: ':='-style assignments are not portable
src/osmo-hnbgw/Makefile.am: installing './depcomp'
+ ./configure --enable-sanitize --enable-external-tests --enable-werror
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for library containing sctp_recvmsg... -lsctp
checking for libasn1c >= 0.9.30... yes
checking for libosmocore >= 1.9.0... yes
checking for libosmovty >= 1.9.0... yes
checking for libosmoctrl >= 1.9.0... yes
checking for libosmogsm >= 1.9.0... yes
checking for libosmo-netif >= 1.4.0... yes
checking for libosmo-sigtran >= 1.8.0... yes
checking for libosmo-rua >= 1.5.0... yes
checking for libosmo-ranap >= 1.5.0... yes
checking for libosmo-hnbap >= 1.5.0... yes
checking for libosmo-mgcp-client >= 1.12.0... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/hnbgw/Makefile
config.status: creating src/Makefile
config.status: creating src/osmo-hnbgw/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating tests/ranap_rab_ass/Makefile
config.status: creating tests/umts_cell_id/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating doc/charts/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 12
echo 1.5.0.75-8b59 > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '/build'
Making all in include
make[2]: Entering directory '/build/include'
Making all in osmocom
make[3]: Entering directory '/build/include/osmocom'
Making all in hnbgw
make[4]: Entering directory '/build/include/osmocom/hnbgw'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/include/osmocom/hnbgw'
make[4]: Entering directory '/build/include/osmocom'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/include/osmocom'
make[3]: Leaving directory '/build/include/osmocom'
make[3]: Entering directory '/build/include'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/include'
make[2]: Leaving directory '/build/include'
Making all in src
make[2]: Entering directory '/build/src'
Making all in osmo-hnbgw
make[3]: Entering directory '/build/src/osmo-hnbgw'
CC osmo_hnbgw_main.o
CC hnbgw.lo
CC hnbgw_hnbap.lo
CC hnbgw_l3.lo
CC hnbgw_rua.lo
CC hnbgw_ranap.lo
CC hnbgw_vty.lo
CC context_map.lo
CC context_map_rua.lo
CC context_map_sccp.lo
CC cnlink.lo
CC hnbgw_cn.lo
CC ranap_rab_ass.lo
CC mgw_fsm.lo
CC kpi_dtap.lo
CC kpi_ranap.lo
CC tdefs.lo
CC nft_kpi.lo
mgw_fsm.c: In function 'mgw_fsm_crcx_hnb_onenter':
mgw_fsm.c:180:9: warning: 'codecs' is deprecated: use ptmap[i].codec instead [-Wdeprecated-declarations]
180 | mgw_info.codecs[0] = CODEC_IUFP;
| ^~~~~~~~
In file included from /build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client/mgcp_client_endpoint_fsm.h:4,
from mgw_fsm.c:48:
/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client/mgcp_client_fsm.h:33:26: note: declared here
33 | enum mgcp_codecs codecs[MGCP_MAX_CODECS]
| ^~~~~~
mgw_fsm.c:181:9: warning: 'codecs_len' is deprecated: use ptmap[] and ptmap_len instead [-Wdeprecated-declarations]
181 | mgw_info.codecs_len = 1;
| ^~~~~~~~
/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client/mgcp_client_fsm.h:35:22: note: declared here
35 | unsigned int codecs_len
| ^~~~~~~~~~
mgw_fsm.c: In function 'mgw_fsm_mdcx_hnb_onenter':
mgw_fsm.c:368:9: warning: 'codecs' is deprecated: use ptmap[i].codec instead [-Wdeprecated-declarations]
368 | mgw_info.codecs[0] = CODEC_IUFP;
| ^~~~~~~~
/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client/mgcp_client_fsm.h:33:26: note: declared here
33 | enum mgcp_codecs codecs[MGCP_MAX_CODECS]
| ^~~~~~
mgw_fsm.c:369:9: warning: 'codecs_len' is deprecated: use ptmap[] and ptmap_len instead [-Wdeprecated-declarations]
369 | mgw_info.codecs_len = 1;
| ^~~~~~~~
/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client/mgcp_client_fsm.h:35:22: note: declared here
35 | unsigned int codecs_len
| ^~~~~~~~~~
mgw_fsm.c: In function 'mgw_fsm_crcx_msc_onenter':
mgw_fsm.c:452:9: warning: 'codecs' is deprecated: use ptmap[i].codec instead [-Wdeprecated-declarations]
452 | mgw_info.codecs[0] = CODEC_IUFP;
| ^~~~~~~~
/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client/mgcp_client_fsm.h:33:26: note: declared here
33 | enum mgcp_codecs codecs[MGCP_MAX_CODECS]
| ^~~~~~
mgw_fsm.c:453:9: warning: 'codecs_len' is deprecated: use ptmap[] and ptmap_len instead [-Wdeprecated-declarations]
453 | mgw_info.codecs_len = 1;
| ^~~~~~~~
/build/deps/install/stow/osmo-mgw/include/osmocom/mgcp_client/mgcp_client_fsm.h:35:22: note: declared here
35 | unsigned int codecs_len
| ^~~~~~~~~~
CCLD libhnbgw.la
CCLD osmo-hnbgw
make[3]: Leaving directory '/build/src/osmo-hnbgw'
make[3]: Entering directory '/build/src'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/src'
make[2]: Leaving directory '/build/src'
Making all in tests
make[2]: Entering directory '/build/tests'
Making all in ranap_rab_ass
make[3]: Entering directory '/build/tests/ranap_rab_ass'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/ranap_rab_ass'
Making all in umts_cell_id
make[3]: Entering directory '/build/tests/umts_cell_id'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/tests/umts_cell_id'
make[3]: Entering directory '/build/tests'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
Making all in doc
make[2]: Entering directory '/build/doc'
Making all in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/examples'
Making all in manuals
make[3]: Entering directory '/build/doc/manuals'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/manuals'
Making all in charts
make[3]: Entering directory '/build/doc/charts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/charts'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making all in contrib
make[2]: Entering directory '/build/contrib'
Making all in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
make[2]: Entering directory '/build'
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ make check
make check-recursive
make[1]: Entering directory '/build'
Making check in include
make[2]: Entering directory '/build/include'
Making check in osmocom
make[3]: Entering directory '/build/include/osmocom'
Making check in hnbgw
make[4]: Entering directory '/build/include/osmocom/hnbgw'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/include/osmocom/hnbgw'
make[4]: Entering directory '/build/include/osmocom'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/include/osmocom'
make[3]: Leaving directory '/build/include/osmocom'
make[3]: Entering directory '/build/include'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/include'
make[2]: Leaving directory '/build/include'
Making check in src
make[2]: Entering directory '/build/src'
Making check in osmo-hnbgw
make[3]: Entering directory '/build/src/osmo-hnbgw'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/src/osmo-hnbgw'
make[3]: Entering directory '/build/src'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/src'
make[2]: Leaving directory '/build/src'
Making check in tests
make[2]: Entering directory '/build/tests'
Making check in ranap_rab_ass
make[3]: Entering directory '/build/tests/ranap_rab_ass'
make ranap_rab_ass_test
make[4]: Entering directory '/build/tests/ranap_rab_ass'
CC ranap_rab_ass_test.o
CCLD ranap_rab_ass_test
make[4]: Leaving directory '/build/tests/ranap_rab_ass'
make[3]: Leaving directory '/build/tests/ranap_rab_ass'
Making check in umts_cell_id
make[3]: Entering directory '/build/tests/umts_cell_id'
make umts_cell_id_test
make[4]: Entering directory '/build/tests/umts_cell_id'
CC umts_cell_id_test.o
CCLD umts_cell_id_test
make[4]: Leaving directory '/build/tests/umts_cell_id'
make[3]: Leaving directory '/build/tests/umts_cell_id'
make[3]: Entering directory '/build/tests'
make check-local
make[4]: Entering directory '/build/tests'
:;{ \
echo '# Signature of the current package.' && \
echo 'm4_define([AT_PACKAGE_NAME],' && \
echo ' [osmo-hnbgw])' && \
echo 'm4_define([AT_PACKAGE_TARNAME],' && \
echo ' [osmo-hnbgw])' && \
echo 'm4_define([AT_PACKAGE_VERSION],' && \
echo ' [1.5.0.75-8b59])' && \
echo 'm4_define([AT_PACKAGE_STRING],' && \
echo ' [osmo-hnbgw 1.5.0.75-8b59])' && \
echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \
echo ' [openbsc@lists.osmocom.org])'; \
echo 'm4_define([AT_PACKAGE_URL],' && \
echo ' [])'; \
} >'./package.m4'
/bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at
mv testsuite.tmp testsuite
/bin/bash './testsuite'
## ------------------------------------ ##
## osmo-hnbgw 1.5.0.75-8b59 test suite. ##
## ------------------------------------ ##
Regression tests.
1: ranap_rab_ass ok
2: umts_cell_id ok
## ------------- ##
## Test results. ##
## ------------- ##
All 2 tests were successful.
make python-tests
make[5]: Entering directory '/build/tests'
make vty-test
make[6]: Entering directory '/build/tests'
osmo_verify_transcript_vty.py -v \
-n OsmoHNBGW -p 4261 \
-r "../src/osmo-hnbgw/osmo-hnbgw \
-c ./osmo-hnbgw-vty-test.cfg" \
./*.vty
rate_ctr.c:86 validating counter group 0x56015951d7e0(iucs) with 3 counters
rate_ctr.c:86 validating counter group 0x56015951d820(iups) with 3 counters
20240606052228333 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4261 (telnet_interface.c:88)
[38;5;33m20240606052228333 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4262 (control_if.c:1024)[0;m
20240606052228333 [1;33mDHNBAP[0;m [1;33mNOTICE[0;m Using RNC-Id 23 (osmo_hnbgw_main.c:300)[0;m
20240606052228333 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Listening for Iuh at 0.0.0.0 29169 (osmo_hnbgw_main.c:303)[0;m
[38;5;51m20240606052228333 [1;33mDLMGCP[0;m[38;5;51m [1;33mNOTICE[0;m[38;5;51m MGW(mgw) MGCP client: using endpoint domain '@mgw' (mgcp_client.c:932)[0;m
[1;33m20240606052228333 [1;33mDMGW[0;m[1;33m [1;33mNOTICE[0;m[1;33m MGW pool with 1 pool members configured, (ignoring MGW configuration in VTY node 'mgcp'). (hnbgw.c:955)[0;m
[38;5;45m20240606052228333 [1;31mDLSCCP[0;m[38;5;45m [1;31mERROR[0;m[38;5;45m SS7 instance 0: no primary point-code set, using default point-code (sccp_user.c:560)[0;m
[38;5;45m20240606052228333 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using SS7 instance 0, pc:0.23.5 (sccp_user.c:566)[0;m
[38;5;45m20240606052228333 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Creating AS instance (sccp_user.c:573)[0;m
[38;5;45m20240606052228333 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using AS instance as-clnt-msc-0 (sccp_user.c:584)[0;m
[38;5;45m20240606052228333 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Creating default route (sccp_user.c:590)[0;m
[38;5;45m20240606052228333 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 (sccp_user.c:629)[0;m
20240606052228333 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Trying to dispatch event 17 to non-existent FSM instance! (osmo_ss7_as.c:118)
20240606052228333 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m backtrace() returned 13 addresses (backtrace.c:42)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(+0x1210f) [0x7fbf4ca4810f] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7fbf4ca48343] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7fbf4ca52b21] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7fbf4cf2c5f7] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7fbf4cf4dfc5] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13bcbc) [0x56015949dcbc] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13d125) [0x56015949f125] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13d2f8) [0x56015949f2f8] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0xe13f0) [0x5601594433f0] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7fbf4c22624a] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7fbf4c226305] (backtrace.c:53)
20240606052228334 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0xdf481) [0x560159441481] (backtrace.c:53)
[38;5;45m20240606052228334 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using ASP instance asp-clnt-msc-0 (sccp_user.c:699)[0;m
[38;5;43m20240606052228334 [1;33mDLSS7[0;m[38;5;43m [1;33mNOTICE[0;m[38;5;43m 0: Creating SCCP instance (osmo_ss7.c:408)[0;m
[33m20240606052228334 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (msc-0) created SCCP instance on cs7 instance 0 (hnbgw_cn.c:880)[0;m
[33m20240606052228334 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) (hnbgw_cn.c:795)[0;m
[33m20240606052228334 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) (hnbgw_cn.c:795)[0;m
[38;5;51m20240606052228334 [1;31mDLMGCP[0;m[38;5;51m [1;31mERROR[0;m[38;5;51m MGW(mgw) Failed to read: r=127.0.0.1:2427<->l=127.0.0.1:2729: -111='Unknown error -111' (mgcp_client.c:789)[0;m
20240606052228335 [1;31mDRANAP[0;m [1;31mERROR[0;m (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) (cnlink.c:171)[0;m
[38;5;43m20240606052228335 [1;31mDLSS7[0;m[38;5;43m [1;31mERROR[0;m[38;5;43m Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:232)[0;m
20240606052228335 [1;31mDRANAP[0;m [1;31mERROR[0;m (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) (cnlink.c:171)[0;m
[38;5;43m20240606052228335 [1;31mDLSS7[0;m[38;5;43m [1;31mERROR[0;m[38;5;43m Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:232)[0;m
Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./osmo-hnbgw-vty-test.cfg
OsmoHNBGW> enable
OsmoHNBGW# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
disable
configure [terminal]
copy running-config startup-config
shutdown
show startup-config
show version
show online-help
terminal length <0-512>
terminal no length
who
show history
terminal monitor
terminal no monitor
show cs7 instance <0-15> users
show cs7 (sua|m3ua|ipa) [<0-65534>]
show cs7 (sua|m3ua|ipa) (sctp|tcp) [<0-65534>]
show cs7 config
cs7 instance <0-15> asp NAME disconnect
show cs7 instance <0-15> asp
show cs7 instance <0-15> asp name ASP_NAME
show cs7 instance <0-15> asp-remaddr
show cs7 instance <0-15> asp-remaddr name ASP_NAME
show cs7 instance <0-15> asp-assoc-status
show cs7 instance <0-15> asp-assoc-status name ASP_NAME
show cs7 instance <0-15> as (active|all|m3ua|sua)
show cs7 instance <0-15> route
show cs7 instance <0-15> sccp addressbook
show cs7 instance <0-15> sccp users
show cs7 instance <0-15> sccp ssn <0-65535>
show cs7 instance <0-15> sccp connections
show cs7 instance <0-15> sccp timers
show cnlink
show hnb all
show hnb NAME
show ue all
show talloc
show fsm NAME
show fsm all
show fsm-state-graph NAME
show fsm-instances NAME
show fsm-instances all
mgw <0-255> reconnect
mgw <0-255> block
mgw <0-255> unblock
show mgw-pool
show timer [(mgw|hnbgw)] [TNNNN]
show nri
(msc|sgsn) <0-1000> ranap reset
logging enable
logging disable
logging filter all (0|1)
logging color (0|1)
logging timestamp (0|1)
logging print extended-timestamp (0|1)
logging print thread-id (0|1)
logging print category (0|1)
logging print category-hex (0|1)
logging print level (0|1)
logging print file (0|1|basename) [last]
logging set-log-mask MASK
logging level (main|hnbap|rua|ranap|mgw|hnb|cn|nft|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp|lnsdata|lnssignal|liuup|lpfcp|lcsn1|lio) (debug|info|notice|error|fatal)
logging level set-all (debug|info|notice|error|fatal)
logging level force-all (debug|info|notice|error|fatal)
no logging level force-all
logp (main|hnbap|rua|ranap|mgw|hnb|cn|nft|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro|lns|lbssgp|lnsdata|lnssignal|liuup|lpfcp|lcsn1|lio) (debug|info|notice|error|fatal) .LOGMESSAGE
show logging vty
show alarms
show talloc-context (application|global|all) (full|brief|DEPTH)
show talloc-context (application|global|all) (full|brief|DEPTH) tree ADDRESS
show talloc-context (application|global|all) (full|brief|DEPTH) filter REGEXP
show stats [skip-zero]
show stats level (global|peer|subscriber) [skip-zero]
show asciidoc counters
show rate-counters [skip-zero]
stats report
stats reset
OsmoHNBGW# msc?
msc Manipulate an IuCS link to an MSC
OsmoHNBGW# msc ?
<0-1000> MSC/SGSN nr
OsmoHNBGW# msc 0 ?
ranap Manipulate RANAP layer of Iu-interface
OsmoHNBGW# msc 0 ranap ?
reset Flip this CN link to disconnected state and re-send RANAP RESET
OsmoHNBGW# sgsn?
sgsn Manipulate an IuPS link to an SGSN
OsmoHNBGW# sgsn ?
<0-1000> MSC/SGSN nr
OsmoHNBGW# sgsn 0 ?
ranap Manipulate RANAP layer of Iu-interface
OsmoHNBGW# sgsn 0 ranap ?
reset Flip this CN link to disconnected state and re-send RANAP RESET
OsmoHNBGW# configure terminal
OsmoHNBGW(config)# ### cnpool doc strings
OsmoHNBGW(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
cs7 instance <0-15>
hnbgw
msc <0-1000>
sgsn <0-1000>
apply sccp
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
OsmoHNBGW(config)# apply?
apply Immediately use configuration modified via telnet VTY, and restart components as needed.
OsmoHNBGW(config)# apply ?
sccp For telnet VTY: apply all SCCP and NRI config changes made to any CN pools and CN links in the running osmo-hnbgw process. If 'remote-addr' changed, related SCCP links will be restarted, possibly dropping active UE contexts. This is run implicitly on program startup, only useful to apply changes made later via telnet VTY.
OsmoHNBGW(config)# hnbgw
OsmoHNBGW(config-hnbgw)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
plmn <1-999> <0-999>
rnc-id <0-65535>
log-prefix (hnb-id|umts-cell-id)
hnb-policy (accept-all|closed)
iuh
iucs
iups
hnb UMTS_CELL_ID
no hnb IDENTITY_INFO
nft-kpi [TABLE_NAME]
no nft-kpi
mgcp
mgw <0-255>
no mgw <0-255>
timer [(mgw|hnbgw)] [TNNNN] [(<0-2147483647>|default)]
OsmoHNBGW(config-hnbgw)# iucs?
iucs Configure IuCS options
OsmoHNBGW(config-hnbgw)# iups?
iups Configure IuPS options
OsmoHNBGW(config-hnbgw)# iucs
OsmoHNBGW(config-hnbgw-iucs)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
nri bitlen <1-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
OsmoHNBGW(config-hnbgw-iucs)# nri?
nri Mapping of Network Resource Indicators to this CN peer, for CN pooling
OsmoHNBGW(config-hnbgw-iucs)# nri ?
bitlen Set number of bits that an NRI has, to extract from TMSI identities (always starting just after the TMSI's most significant octet).
null Define NULL-NRI values that cause re-assignment of an MS to a different CN peer, for CN pooling.
OsmoHNBGW(config-hnbgw-iucs)# nri bitlen ?
<1-15> bit count (default: 10)
OsmoHNBGW(config-hnbgw-iucs)# nri null ?
add Add NULL-NRI value (or range)
del Remove NRI value or range from the NRI mapping for this CN link
OsmoHNBGW(config-hnbgw-iucs)# nri null add ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iucs)# nri null add 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iucs)# nri null del ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iucs)# nri null del 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iucs)# exit
OsmoHNBGW(config-hnbgw)# iups
OsmoHNBGW(config-hnbgw-iups)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
nri bitlen <1-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
OsmoHNBGW(config-hnbgw-iups)# nri?
nri Mapping of Network Resource Indicators to this CN peer, for CN pooling
OsmoHNBGW(config-hnbgw-iups)# nri ?
bitlen Set number of bits that an NRI has, to extract from TMSI identities (always starting just after the TMSI's most significant octet).
null Define NULL-NRI values that cause re-assignment of an MS to a different CN peer, for CN pooling.
OsmoHNBGW(config-hnbgw-iups)# nri bitlen ?
<1-15> bit count (default: 10)
OsmoHNBGW(config-hnbgw-iups)# nri null ?
add Add NULL-NRI value (or range)
del Remove NRI value or range from the NRI mapping for this CN link
OsmoHNBGW(config-hnbgw-iups)# nri null add ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iups)# nri null add 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iups)# nri null del ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iups)# nri null del 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iups)# exit
OsmoHNBGW(config-hnbgw)# exit
OsmoHNBGW(config)# msc?
msc Configure an IuCS link to an MSC
OsmoHNBGW(config)# msc ?
<0-1000> MSC nr
OsmoHNBGW(config)# sgsn?
sgsn Configure an IuPS link to an SGSN
OsmoHNBGW(config)# sgsn ?
<0-1000> SGSN nr
OsmoHNBGW(config)# ### The config file has no 'msc' or 'sgsn', so defaults have been set up
OsmoHNBGW(config)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config)# msc 1
OsmoHNBGW(config-msc)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
remote-addr NAME
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
show nri
apply sccp
allow-attach
no allow-attach
allow-emergency
no allow-emergency
OsmoHNBGW(config-msc)# remote-addr?
remote-addr SCCP address to send RANAP/SCCP to
OsmoHNBGW(config-msc)# remote-addr ?
NAME SCCP address book entry name (see 'cs7 instance' / 'sccp-address')
OsmoHNBGW(config-msc)# show nri?
nri Mapping of Network Resource Indicators to this CN peer, for CN pooling
OsmoHNBGW(config-msc)# apply?
apply Immediately use configuration modified via telnet VTY, and restart components as needed.
OsmoHNBGW(config-msc)# apply ?
sccp For telnet VTY: apply SCCP and NRI config changes made to this CN link in the running osmo-hnbgw process. If 'remote-addr' changed, related SCCP links will be restarted, possibly dropping active UE contexts. This is run implicitly on program startup, only useful to apply changes made later via telnet VTY.
OsmoHNBGW(config-msc)# allow-attach?
allow-attach Allow this CN link to attach new subscribers (default).
OsmoHNBGW(config-msc)# allow-emergency?
allow-emergency Allow CM ServiceRequests with type emergency on this CN link
OsmoHNBGW(config-msc)# no ?
allow-attach Do not assign new subscribers to this CN link. Useful if an CN link in an CN link pool is configured to off-load subscribers. The CN link will still be operational for already IMSI-Attached subscribers, but the NAS node selection function will skip this CN link for new subscribers
allow-emergency Do not serve CM ServiceRequests with type emergency on this CN link
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# sgsn 1
OsmoHNBGW(config-sgsn)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
remote-addr NAME
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
show nri
apply sccp
allow-attach
no allow-attach
allow-emergency
no allow-emergency
OsmoHNBGW(config-sgsn)# remote-addr?
remote-addr SCCP address to send RANAP/SCCP to
OsmoHNBGW(config-sgsn)# remote-addr ?
NAME SCCP address book entry name (see 'cs7 instance' / 'sccp-address')
OsmoHNBGW(config-sgsn)# show nri?
nri Mapping of Network Resource Indicators to this CN peer, for CN pooling
OsmoHNBGW(config-sgsn)# apply?
apply Immediately use configuration modified via telnet VTY, and restart components as needed.
OsmoHNBGW(config-sgsn)# apply ?
sccp For telnet VTY: apply SCCP and NRI config changes made to this CN link in the running osmo-hnbgw process. If 'remote-addr' changed, related SCCP links will be restarted, possibly dropping active UE contexts. This is run implicitly on program startup, only useful to apply changes made later via telnet VTY.
OsmoHNBGW(config-sgsn)# allow-attach?
allow-attach Allow this CN link to attach new subscribers (default).
OsmoHNBGW(config-sgsn)# allow-emergency?
allow-emergency Allow CM ServiceRequests with type emergency on this CN link
OsmoHNBGW(config-sgsn)# no ?
allow-attach Do not assign new subscribers to this CN link. Useful if an CN link in an CN link pool is configured to off-load subscribers. The CN link will still be operational for already IMSI-Attached subscribers, but the NAS node selection function will skip this CN link for new subscribers
allow-emergency Do not serve CM ServiceRequests with type emergency on this CN link
OsmoHNBGW(config-sgsn)# exit
OsmoHNBGW(config)# ### Just by entering the nodes above, 'msc 1' and 'sgsn 1' now exist
OsmoHNBGW(config)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
msc 1
sgsn 0
sgsn 1
end
OsmoHNBGW(config)# ### Add {msc,sgsn}x{2,3}
OsmoHNBGW(config)# msc 2
OsmoHNBGW(config-msc)# remote-addr addr-msc2
OsmoHNBGW(config-msc)# no allow-attach
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# msc 3
OsmoHNBGW(config-msc)# remote-addr addr-msc3
OsmoHNBGW(config-msc)# allow-emergency
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# sgsn 2
OsmoHNBGW(config-sgsn)# remote-addr addr-sgsn2
OsmoHNBGW(config-sgsn)# exit
OsmoHNBGW(config)# sgsn 3
OsmoHNBGW(config-sgsn)# remote-addr addr-sgsn3
OsmoHNBGW(config-sgsn)# exit
OsmoHNBGW(config)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
msc 1
msc 2
remote-addr addr-msc2
no allow-attach
msc 3
remote-addr addr-msc3
allow-emergency
sgsn 0
sgsn 1
sgsn 2
remote-addr addr-sgsn2
sgsn 3
remote-addr addr-sgsn3
end
OsmoHNBGW(config)# ### Re-entering existing nodes works (does not create new ones)
OsmoHNBGW(config)# msc 2
OsmoHNBGW(config-msc)# allow-attach
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# msc 3
OsmoHNBGW(config-msc)# remote-addr addr-msc4
OsmoHNBGW(config-msc)# no allow-emergency
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# sgsn 2
OsmoHNBGW(config-sgsn)# remote-addr addr-sgsn4
OsmoHNBGW(config-sgsn)# exit
OsmoHNBGW(config)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
msc 1
msc 2
remote-addr addr-msc2
msc 3
remote-addr addr-msc4
sgsn 0
sgsn 1
sgsn 2
remote-addr addr-sgsn4
sgsn 3
remote-addr addr-sgsn3
end
OsmoHNBGW(config)# ### Legacy configuration {'iups','iucs'} / 'remote-addr' redirects to {'msc 0','sgsn 0'}:
OsmoHNBGW(config)# hnbgw
OsmoHNBGW(config-hnbgw)# iucs
OsmoHNBGW(config-hnbgw-iucs)# remote-addr?
% There is no matched command.
OsmoHNBGW(config-hnbgw-iucs)# remote-addr ?
% There is no matched command.
OsmoHNBGW(config-hnbgw-iucs)# remote-addr addr-msc0
20240606052228435 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m config: Deprecated: instead of hnbgw/iucs/remote-addr, use 'msc 0'/remote-addr (hnbgw_vty.c:485)
% Deprecated: instead of hnbgw/iucs/remote-addr, use 'msc 0'/remote-addr
OsmoHNBGW(config-hnbgw-iucs)# exit
OsmoHNBGW(config-hnbgw)# iups
OsmoHNBGW(config-hnbgw-iups)# remote-addr?
% There is no matched command.
OsmoHNBGW(config-hnbgw-iups)# remote-addr ?
% There is no matched command.
OsmoHNBGW(config-hnbgw-iups)# remote-addr addr-sgsn0
20240606052228435 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m config: Deprecated: instead of hnbgw/iups/remote-addr, use 'sgsn 0'/remote-addr (hnbgw_vty.c:485)
% Deprecated: instead of hnbgw/iups/remote-addr, use 'sgsn 0'/remote-addr
OsmoHNBGW(config-hnbgw-iups)# exit
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
remote-addr addr-msc0
msc 1
msc 2
remote-addr addr-msc2
msc 3
remote-addr addr-msc4
sgsn 0
remote-addr addr-sgsn0
sgsn 1
sgsn 2
remote-addr addr-sgsn4
sgsn 3
remote-addr addr-sgsn3
end
OsmoHNBGW(config-hnbgw)# ### placement of the new 'msc' and 'sgsn' nodes must be below 'pfcp' and 'mgw' nodes
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
remote-addr addr-msc0
msc 1
msc 2
remote-addr addr-msc2
msc 3
remote-addr addr-msc4
sgsn 0
remote-addr addr-sgsn0
sgsn 1
sgsn 2
remote-addr addr-sgsn4
sgsn 3
remote-addr addr-sgsn3
end
rate_ctr.c:86 validating counter group 0x55d1dc2e77e0(iucs) with 3 counters
rate_ctr.c:86 validating counter group 0x55d1dc2e7820(iups) with 3 counters
20240606052228612 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4261 (telnet_interface.c:88)
[38;5;33m20240606052228612 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4262 (control_if.c:1024)[0;m
20240606052228612 [1;33mDHNBAP[0;m [1;33mNOTICE[0;m Using RNC-Id 23 (osmo_hnbgw_main.c:300)[0;m
20240606052228612 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Listening for Iuh at 0.0.0.0 29169 (osmo_hnbgw_main.c:303)[0;m
[38;5;51m20240606052228612 [1;33mDLMGCP[0;m[38;5;51m [1;33mNOTICE[0;m[38;5;51m MGW(mgw) MGCP client: using endpoint domain '@mgw' (mgcp_client.c:932)[0;m
[1;33m20240606052228612 [1;33mDMGW[0;m[1;33m [1;33mNOTICE[0;m[1;33m MGW pool with 1 pool members configured, (ignoring MGW configuration in VTY node 'mgcp'). (hnbgw.c:955)[0;m
[38;5;45m20240606052228612 [1;31mDLSCCP[0;m[38;5;45m [1;31mERROR[0;m[38;5;45m SS7 instance 0: no primary point-code set, using default point-code (sccp_user.c:560)[0;m
[38;5;45m20240606052228612 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using SS7 instance 0, pc:0.23.5 (sccp_user.c:566)[0;m
[38;5;45m20240606052228612 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Creating AS instance (sccp_user.c:573)[0;m
[38;5;45m20240606052228612 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using AS instance as-clnt-msc-0 (sccp_user.c:584)[0;m
[38;5;45m20240606052228612 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Creating default route (sccp_user.c:590)[0;m
[38;5;45m20240606052228612 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 (sccp_user.c:629)[0;m
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Trying to dispatch event 17 to non-existent FSM instance! (osmo_ss7_as.c:118)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m backtrace() returned 13 addresses (backtrace.c:42)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(+0x1210f) [0x7f8ccb59c10f] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f8ccb59c343] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f8ccb5a6b21] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f8ccba805f7] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f8ccbaa1fc5] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13bcbc) [0x55d1dc267cbc] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13d125) [0x55d1dc269125] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13d2f8) [0x55d1dc2692f8] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0xe13f0) [0x55d1dc20d3f0] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f8ccad7a24a] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f8ccad7a305] (backtrace.c:53)
20240606052228613 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0xdf481) [0x55d1dc20b481] (backtrace.c:53)
[38;5;45m20240606052228613 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using ASP instance asp-clnt-msc-0 (sccp_user.c:699)[0;m
[38;5;43m20240606052228613 [1;33mDLSS7[0;m[38;5;43m [1;33mNOTICE[0;m[38;5;43m 0: Creating SCCP instance (osmo_ss7.c:408)[0;m
[33m20240606052228613 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (msc-0) created SCCP instance on cs7 instance 0 (hnbgw_cn.c:880)[0;m
[33m20240606052228613 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) (hnbgw_cn.c:795)[0;m
[33m20240606052228613 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) (hnbgw_cn.c:795)[0;m
[38;5;51m20240606052228613 [1;31mDLMGCP[0;m[38;5;51m [1;31mERROR[0;m[38;5;51m MGW(mgw) Failed to read: r=127.0.0.1:2427<->l=127.0.0.1:2729: -111='Unknown error -111' (mgcp_client.c:789)[0;m
20240606052228614 [1;31mDRANAP[0;m [1;31mERROR[0;m (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) (cnlink.c:171)[0;m
[38;5;43m20240606052228614 [1;31mDLSS7[0;m[38;5;43m [1;31mERROR[0;m[38;5;43m Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:232)[0;m
20240606052228614 [1;31mDRANAP[0;m [1;31mERROR[0;m (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) (cnlink.c:171)[0;m
[38;5;43m20240606052228614 [1;31mDLSS7[0;m[38;5;43m [1;31mERROR[0;m[38;5;43m Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:232)[0;m
Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./osmo-hnbgw-vty-test.cfg
OsmoHNBGW> show nri
hnbgw
iucs
nri bitlen 10
% No NULL-NRI entries
iups
nri bitlen 10
% No NULL-NRI entries
msc 0
% no NRI mappings
sgsn 0
% no NRI mappings
OsmoHNBGW> enable
OsmoHNBGW# configure terminal
OsmoHNBGW(config)# msc 0
OsmoHNBGW(config-msc)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
remote-addr NAME
nri add <0-32767> [<0-32767>]
nri del <0-32767> [<0-32767>]
show nri
apply sccp
allow-attach
no allow-attach
allow-emergency
no allow-emergency
OsmoHNBGW(config-msc)# nri ?
add Add NRI value or range to the NRI mapping for this CN link
del Remove NRI value or range from the NRI mapping for this CN link
OsmoHNBGW(config-msc)# nri add ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-msc)# nri add 23 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-msc)# nri add 23
OsmoHNBGW(config-msc)# nri add 256 511
OsmoHNBGW(config-msc)# nri add 100 200
OsmoHNBGW(config-msc)# nri add 1024 1024
[33m20240606052228705 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 0: Warning: NRI range surpasses current NRI bitlen: 1024..1024 (hnbgw_vty.c:571)[0;m
% Warning: msc 0: Warning: NRI range surpasses current NRI bitlen: 1024..1024
OsmoHNBGW(config-msc)# show nri
msc 0
nri add 23
nri add 100 200
nri add 256 511
nri add 1024
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# ### Do msc 2 first, to see that the order of mscs in the internal list is not determined by the msc->nr,
OsmoHNBGW(config)# ### and whichever was configured first gets higher priority for overlaps.
OsmoHNBGW(config)# msc 2
OsmoHNBGW(config-msc)# nri add 200 300
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 2: NRI range [200..300] overlaps between msc 2 and msc 0. For overlaps, msc 0 has higher priority than msc 2 (hnbgw_vty.c:585)[0;m
% Warning: msc 2: NRI range [200..300] overlaps between msc 2 and msc 0. For overlaps, msc 0 has higher priority than msc 2
OsmoHNBGW(config-msc)# nri add 1024 1025
% Warning: msc 2: Warning: NRI range surpasses current NRI bitlen: 1024..1025
% Warning: msc 2: NRI range [1024..1025] overlaps between msc 2 and msc 0. For overlaps, msc 0 has higher priority than msc 2
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# msc 1
OsmoHNBGW(config-msc)# nri add 42
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 2: Warning: NRI range surpasses current NRI bitlen: 1024..1025 (hnbgw_vty.c:571)[0;m
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 2: NRI range [1024..1025] overlaps between msc 2 and msc 0. For overlaps, msc 0 has higher priority than msc 2 (hnbgw_vty.c:585)[0;m
OsmoHNBGW(config-msc)# nri add 512 767
OsmoHNBGW(config-msc)# nri add 200 300
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 1: NRI range [200..300] overlaps between msc 1 and msc 0. For overlaps, msc 0 has higher priority than msc 1 (hnbgw_vty.c:585)[0;m
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 1: NRI range [200..300] overlaps between msc 1 and msc 2. For overlaps, msc 2 has higher priority than msc 1 (hnbgw_vty.c:585)[0;m
% Warning: msc 1: NRI range [200..300] overlaps between msc 1 and msc 0. For overlaps, msc 0 has higher priority than msc 1
% Warning: msc 1: NRI range [200..300] overlaps between msc 1 and msc 2. For overlaps, msc 2 has higher priority than msc 1
OsmoHNBGW(config-msc)# nri add 1024 1025
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 1: Warning: NRI range surpasses current NRI bitlen: 1024..1025 (hnbgw_vty.c:571)[0;m
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 1: NRI range [1024..1025] overlaps between msc 1 and msc 0. For overlaps, msc 0 has higher priority than msc 1 (hnbgw_vty.c:585)[0;m
[33m20240606052228706 [1;31mDCN[0;m[33m [1;31mERROR[0;m[33m msc 1: NRI range [1024..1025] overlaps between msc 1 and msc 2. For overlaps, msc 2 has higher priority than msc 1 (hnbgw_vty.c:585)[0;m
% Warning: msc 1: Warning: NRI range surpasses current NRI bitlen: 1024..1025
% Warning: msc 1: NRI range [1024..1025] overlaps between msc 1 and msc 0. For overlaps, msc 0 has higher priority than msc 1
% Warning: msc 1: NRI range [1024..1025] overlaps between msc 1 and msc 2. For overlaps, msc 2 has higher priority than msc 1
OsmoHNBGW(config-msc)# show nri
msc 1
nri add 42
nri add 200 300
nri add 512 767
nri add 1024 1025
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# do show nri
hnbgw
iucs
nri bitlen 10
% No NULL-NRI entries
iups
nri bitlen 10
% No NULL-NRI entries
msc 0
nri add 23
nri add 100 200
nri add 256 511
nri add 1024
msc 2
nri add 200 300
nri add 1024 1025
msc 1
nri add 42
nri add 200 300
nri add 512 767
nri add 1024 1025
sgsn 0
% no NRI mappings
OsmoHNBGW(config)# ### msc and sgsn have separate scopes of NRI, i.e. overlaps are no problem
OsmoHNBGW(config)# sgsn 0
OsmoHNBGW(config-sgsn)# nri add 0 1023
OsmoHNBGW(config-sgsn)# show nri
sgsn 0
nri add 0 1023
OsmoHNBGW(config-sgsn)# exit
OsmoHNBGW(config)# ### NULL-NRI config
OsmoHNBGW(config)# hnbgw
OsmoHNBGW(config-hnbgw)# iucs
OsmoHNBGW(config-hnbgw-iucs)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
nri bitlen <1-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
OsmoHNBGW(config-hnbgw-iucs)# nri ?
bitlen Set number of bits that an NRI has, to extract from TMSI identities (always starting just after the TMSI's most significant octet).
null Define NULL-NRI values that cause re-assignment of an MS to a different CN peer, for CN pooling.
OsmoHNBGW(config-hnbgw-iucs)# nri bitlen ?
<1-15> bit count (default: 10)
OsmoHNBGW(config-hnbgw-iucs)# nri bitlen 11
OsmoHNBGW(config-hnbgw-iucs)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iucs
nri bitlen 11
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
nri add 23
nri add 100 200
nri add 256 511
nri add 1024
msc 2
nri add 200 300
nri add 1024 1025
msc 1
nri add 42
nri add 200 300
nri add 512 767
nri add 1024 1025
sgsn 0
nri add 0 1023
end
OsmoHNBGW(config-hnbgw-iucs)# nri null ?
add Add NULL-NRI value (or range)
del Remove NRI value or range from the NRI mapping for this CN link
OsmoHNBGW(config-hnbgw-iucs)# nri null add ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iucs)# nri null add 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iucs)# nri null del ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iucs)# nri null del 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iucs)# exit
OsmoHNBGW(config-hnbgw)# iups
OsmoHNBGW(config-hnbgw-iups)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
nri bitlen <1-15>
nri null add <0-32767> [<0-32767>]
nri null del <0-32767> [<0-32767>]
OsmoHNBGW(config-hnbgw-iups)# nri ?
bitlen Set number of bits that an NRI has, to extract from TMSI identities (always starting just after the TMSI's most significant octet).
null Define NULL-NRI values that cause re-assignment of an MS to a different CN peer, for CN pooling.
OsmoHNBGW(config-hnbgw-iups)# nri bitlen ?
<1-15> bit count (default: 10)
OsmoHNBGW(config-hnbgw-iups)# nri bitlen 9
OsmoHNBGW(config-hnbgw-iups)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iucs
nri bitlen 11
iups
nri bitlen 9
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
nri add 23
nri add 100 200
nri add 256 511
nri add 1024
msc 2
nri add 200 300
nri add 1024 1025
msc 1
nri add 42
nri add 200 300
nri add 512 767
nri add 1024 1025
sgsn 0
nri add 0 1023
end
OsmoHNBGW(config-hnbgw-iups)# nri null ?
add Add NULL-NRI value (or range)
del Remove NRI value or range from the NRI mapping for this CN link
OsmoHNBGW(config-hnbgw-iups)# nri null add ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iups)# nri null add 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iups)# nri null del ?
<0-32767> First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoHNBGW(config-hnbgw-iups)# nri null del 0 ?
[<0-32767>] Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.
OsmoHNBGW(config-hnbgw-iups)# exit
OsmoHNBGW(config-hnbgw)# exit
OsmoHNBGW(config)# msc 0
OsmoHNBGW(config-msc)# nri del 0 10000
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# msc 1
OsmoHNBGW(config-msc)# nri del 0 10000
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# msc 2
OsmoHNBGW(config-msc)# nri del 0 10000
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# do show nri
hnbgw
iucs
nri bitlen 11
% No NULL-NRI entries
iups
nri bitlen 9
% No NULL-NRI entries
msc 0
% no NRI mappings
msc 2
% no NRI mappings
msc 1
% no NRI mappings
sgsn 0
nri add 0 1023
OsmoHNBGW(config)# msc 0
OsmoHNBGW(config-msc)# nri add 0 1000
OsmoHNBGW(config-msc)# show nri
msc 0
nri add 0 1000
OsmoHNBGW(config-msc)# nri del 23
OsmoHNBGW(config-msc)# nri del 200 300
OsmoHNBGW(config-msc)# nri del 1000 2000
OsmoHNBGW(config-msc)# show nri
msc 0
nri add 0 22
nri add 24 199
nri add 301 999
OsmoHNBGW(config-msc)# nri add 23
OsmoHNBGW(config-msc)# show nri
msc 0
nri add 0 199
nri add 301 999
OsmoHNBGW(config-msc)# nri add 200 300
OsmoHNBGW(config-msc)# show nri
msc 0
nri add 0 999
OsmoHNBGW(config-msc)# nri add 1000
OsmoHNBGW(config-msc)# show nri
msc 0
nri add 0 1000
OsmoHNBGW(config-msc)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iucs
nri bitlen 11
iups
nri bitlen 9
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
nri add 0 1000
msc 2
msc 1
sgsn 0
nri add 0 1023
end
OsmoHNBGW(config-msc)# no allow-attach
OsmoHNBGW(config-msc)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iucs
nri bitlen 11
iups
nri bitlen 9
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
nri add 0 1000
no allow-attach
msc 2
msc 1
sgsn 0
nri add 0 1023
end
OsmoHNBGW(config-msc)# exit
OsmoHNBGW(config)# sgsn 1
OsmoHNBGW(config-sgsn)# no allow-attach
OsmoHNBGW(config-sgsn)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iucs
nri bitlen 11
iups
nri bitlen 9
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
nri add 0 1000
no allow-attach
msc 2
msc 1
sgsn 0
nri add 0 1023
sgsn 1
no allow-attach
end
OsmoHNBGW(config-sgsn)# allow-attach
OsmoHNBGW(config-sgsn)# exit
OsmoHNBGW(config)# msc 0
OsmoHNBGW(config-msc)# allow-attach
OsmoHNBGW(config-msc)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iucs
nri bitlen 11
iups
nri bitlen 9
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
nri add 0 1000
msc 2
msc 1
sgsn 0
nri add 0 1023
sgsn 1
end
OsmoHNBGW(config-msc)# exit
rate_ctr.c:86 validating counter group 0x55e616b5a7e0(iucs) with 3 counters
rate_ctr.c:86 validating counter group 0x55e616b5a820(iups) with 3 counters
20240606052228886 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4261 (telnet_interface.c:88)
[38;5;33m20240606052228886 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4262 (control_if.c:1024)[0;m
20240606052228886 [1;33mDHNBAP[0;m [1;33mNOTICE[0;m Using RNC-Id 23 (osmo_hnbgw_main.c:300)[0;m
20240606052228886 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Listening for Iuh at 0.0.0.0 29169 (osmo_hnbgw_main.c:303)[0;m
[38;5;51m20240606052228886 [1;33mDLMGCP[0;m[38;5;51m [1;33mNOTICE[0;m[38;5;51m MGW(mgw) MGCP client: using endpoint domain '@mgw' (mgcp_client.c:932)[0;m
[1;33m20240606052228887 [1;33mDMGW[0;m[1;33m [1;33mNOTICE[0;m[1;33m MGW pool with 1 pool members configured, (ignoring MGW configuration in VTY node 'mgcp'). (hnbgw.c:955)[0;m
[38;5;45m20240606052228887 [1;31mDLSCCP[0;m[38;5;45m [1;31mERROR[0;m[38;5;45m SS7 instance 0: no primary point-code set, using default point-code (sccp_user.c:560)[0;m
[38;5;45m20240606052228887 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using SS7 instance 0, pc:0.23.5 (sccp_user.c:566)[0;m
[38;5;45m20240606052228887 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Creating AS instance (sccp_user.c:573)[0;m
[38;5;45m20240606052228887 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using AS instance as-clnt-msc-0 (sccp_user.c:584)[0;m
[38;5;45m20240606052228887 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Creating default route (sccp_user.c:590)[0;m
[38;5;45m20240606052228887 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 (sccp_user.c:629)[0;m
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Trying to dispatch event 17 to non-existent FSM instance! (osmo_ss7_as.c:118)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m backtrace() returned 13 addresses (backtrace.c:42)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(+0x1210f) [0x7f387844010f] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f3878440343] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f387844ab21] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f38789245f7] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f3878945fc5] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13bcbc) [0x55e616adacbc] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13d125) [0x55e616adc125] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0x13d2f8) [0x55e616adc2f8] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0xe13f0) [0x55e616a803f0] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f3877c1e24a] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f3877c1e305] (backtrace.c:53)
20240606052228887 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m ../src/osmo-hnbgw/osmo-hnbgw(+0xdf481) [0x55e616a7e481] (backtrace.c:53)
[38;5;45m20240606052228887 [1;33mDLSCCP[0;m[38;5;45m [1;33mNOTICE[0;m[38;5;45m msc-0: Using ASP instance asp-clnt-msc-0 (sccp_user.c:699)[0;m
[38;5;43m20240606052228887 [1;33mDLSS7[0;m[38;5;43m [1;33mNOTICE[0;m[38;5;43m 0: Creating SCCP instance (osmo_ss7.c:408)[0;m
[33m20240606052228887 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (msc-0) created SCCP instance on cs7 instance 0 (hnbgw_cn.c:880)[0;m
[33m20240606052228887 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) (hnbgw_cn.c:795)[0;m
[33m20240606052228887 [1;33mDCN[0;m[33m [1;33mNOTICE[0;m[33m (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) (hnbgw_cn.c:795)[0;m
[38;5;51m20240606052228887 [1;31mDLMGCP[0;m[38;5;51m [1;31mERROR[0;m[38;5;51m MGW(mgw) Failed to read: r=127.0.0.1:2427<->l=127.0.0.1:2729: -111='Unknown error -111' (mgcp_client.c:789)[0;m
20240606052228888 [1;31mDRANAP[0;m [1;31mERROR[0;m (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) (cnlink.c:171)[0;m
[38;5;43m20240606052228888 [1;31mDLSS7[0;m[38;5;43m [1;31mERROR[0;m[38;5;43m Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:232)[0;m
20240606052228888 [1;31mDRANAP[0;m [1;31mERROR[0;m (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) (cnlink.c:171)[0;m
[38;5;43m20240606052228888 [1;31mDLSS7[0;m[38;5;43m [1;31mERROR[0;m[38;5;43m Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:232)[0;m
Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./osmo-hnbgw-vty-test.cfg
OsmoHNBGW> enable
OsmoHNBGW# configure terminal
OsmoHNBGW(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
cs7 instance <0-15>
hnbgw
msc <0-1000>
sgsn <0-1000>
apply sccp
ctrl
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
stats reporter statsd [NAME]
no stats reporter statsd [NAME]
stats reporter log [NAME]
no stats reporter log [NAME]
stats interval <0-65535>
stats-tcp interval <0-65535>
stats-tcp batch-size <1-65535>
OsmoHNBGW(config)# hnbgw?
hnbgw Configure HNBGW options
OsmoHNBGW(config)# hnbgw
OsmoHNBGW(config-hnbgw)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
plmn <1-999> <0-999>
rnc-id <0-65535>
log-prefix (hnb-id|umts-cell-id)
hnb-policy (accept-all|closed)
iuh
iucs
iups
hnb UMTS_CELL_ID
no hnb IDENTITY_INFO
nft-kpi [TABLE_NAME]
no nft-kpi
mgcp
mgw <0-255>
no mgw <0-255>
timer [(mgw|hnbgw)] [TNNNN] [(<0-2147483647>|default)]
OsmoHNBGW(config-hnbgw)# plmn?
plmn Configure the HNBGW's PLMN. The PLMN is transmitted in RANAP RESET towards the CN.
OsmoHNBGW(config-hnbgw)# plmn ?
<1-999> MCC, Mobile Country Code
OsmoHNBGW(config-hnbgw)# plmn 1 ?
<0-999> MNC, Mobile Network Code
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# plmn 001 01
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
plmn 001 01
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# plmn 001 001
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
plmn 001 001
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# plmn 999 999
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
plmn 999 999
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# plmn 23 42
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
plmn 023 42
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# rnc-id?
rnc-id Configure the HNBGW's RNC Id, the common RNC Id used for all connected hNodeB. It is sent to each hNodeB upon HNBAP HNB-Register-Accept, and the hNodeB will subsequently send this as RANAP InitialUE Messages' GlobalRNC-ID IE. Takes effect as soon as the hNodeB re-registers.
OsmoHNBGW(config-hnbgw)# rnc-id ?
<0-65535> RNC Id value
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
plmn 023 42
rnc-id 23
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# rnc-id 42
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
plmn 023 42
rnc-id 42
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# nft-kpi?
nft-kpi Retrieve traffic counters from nftables
OsmoHNBGW(config-hnbgw)# nft-kpi ?
[TABLE_NAME] Set a custom nft table name to use, instead of 'osmo-hnbgw'
OsmoHNBGW(config-hnbgw)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging print extended-timestamp 1
logging print level 1
logging print file basename last
logging level main notice
logging level hnbap notice
logging level rua notice
logging level ranap notice
logging level mgw notice
logging level hnb notice
logging level cn notice
logging level nft notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
cs7 instance 0
point-code 0.23.5
sccp-address addr-msc0
routing-indicator PC
point-code 0.1.0
sccp-address addr-msc2
routing-indicator PC
point-code 0.1.2
sccp-address addr-sgsn3
routing-indicator PC
point-code 0.2.3
sccp-address addr-sgsn4
routing-indicator PC
point-code 0.2.4
cs7 instance 1
sccp-address addr-sgsn0
routing-indicator PC
point-code 1.2.0
sccp-address addr-sgsn2
routing-indicator PC
point-code 1.2.2
sccp-address addr-msc3
routing-indicator PC
point-code 1.1.3
sccp-address addr-msc4
routing-indicator PC
point-code 1.1.4
hnbgw
plmn 023 42
rnc-id 42
log-prefix hnb-id
iuh
hnbap-allow-tmsi 1
mgw 0
local-port 2729
remote-ip 127.0.0.1
remote-port 2427
reset-endpoint rtpbridge/*
msc 0
sgsn 0
end
OsmoHNBGW(config-hnbgw)# nft-kpi
% ERROR: Built without libnftables support, cannot enable nft-kpi
Error during transcript step 27:
[
OsmoHNBGW(config-hnbgw)# nft-kpi
% WARNING: nft configuration changes need a restart of osmo-hnbgw
]
Error while verifying transcript file './osmo-hnbgw.vty'
Traceback (most recent call last):
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application
interact.verify_transcript_file(transcript_file)
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file
result = self.verify_transcript(content)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript
raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]'
Exception: Result mismatch:
Mismatch:
Expect:
'% WARNING: nft configuration changes need a restart of osmo-hnbgw'
Got:
'% ERROR: Built without libnftables support, cannot enable nft-kpi'
Expected:
[
OsmoHNBGW(config-hnbgw)# nft-kpi
% WARNING: nft configuration changes need a restart of osmo-hnbgw
]
Got:
[
OsmoHNBGW(config-hnbgw)# nft-kpi
% ERROR: Built without libnftables support, cannot enable nft-kpi
]
RESULTS:
pass: ./cnpool.vty
pass: ./nri_cfg.vty
FAIL: ./osmo-hnbgw.vty
make[6]: *** [Makefile:722: vty-test] Error 1
make[6]: Leaving directory '/build/tests'
make[5]: *** [Makefile:707: python-tests] Error 2
make[5]: Leaving directory '/build/tests'
make[4]: *** [Makefile:749: check-local] Error 2
make[4]: Leaving directory '/build/tests'
make[3]: *** [Makefile:567: check-am] Error 2
make[3]: Leaving directory '/build/tests'
make[2]: *** [Makefile:417: check-recursive] Error 1
make[2]: Leaving directory '/build/tests'
make[1]: *** [Makefile:463: check-recursive] Error 1
make[1]: Leaving directory '/build'
make: *** [Makefile:762: check] Error 2
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
Finished: FAILURE
![[Jenkins]](/jenkins/static/342c126a/images/svgs/logo.svg){kind=logo}
