Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=19084): Process ended prematurely: osmo-stp_10.42.42.5(pid=19084) [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19084)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:00:13.801562 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:13.812510 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:00:13.972303 tst cs_paging_gprs_active.py: using LAC 40749 12:00:14.093677 tst cs_paging_gprs_active.py: using RAC 204 12:00:14.213612 tst cs_paging_gprs_active.py: using CellId 40749 12:00:14.333053 tst cs_paging_gprs_active.py: using BVCI 40750 12:00:14.356520 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.367513 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.378462 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.389360 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.400494 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.411726 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.423018 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.434140 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:00:14.445459 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:00:14.567833 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:00:14.851890 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:00:14.979697 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:00:15.300314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19074): Launched 12:00:15.580924 run iperf3-srv_10.42.42.10(pid=19075): Launched 12:00:15.786003 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:00:15.926948 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:00:16.286004 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19076): Launched 12:00:16.587920 run iperf3-srv_10.42.42.10(pid=19077): Launched 12:00:16.802518 tst cs_paging_gprs_active.py:38: start network... 12:00:16.963149 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:00:17.494996 run create_hlr_db(pid=19078): Launched 12:00:17.684619 bus /gobi_6: Setting Powered False 12:00:18.706535 run create_hlr_db(pid=19078): Terminated: ok {rc=0} 12:00:19.143351 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19080): Launched 12:00:19.473726 run osmo-hlr_10.42.42.2(pid=19081): Launched 12:00:19.592826 run osmo-stp_10.42.42.5: Starting osmo-stp 12:00:20.163355 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19083): Launched 12:00:20.492411 run osmo-stp_10.42.42.5(pid=19084): Launched 12:00:20.610307 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:00:21.182219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19086): Launched 12:00:21.298989 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:00:21.586748 run patchelf(pid=19087): Launched 12:00:21.778283 run osmo-stp_10.42.42.5(pid=19084): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19084)] 12:00:21.918806 run osmo-stp_10.42.42.5(pid=19084): stdout: | (launched: 2022-12-14_12:00:20.332241) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:00:22.059493 run osmo-stp_10.42.42.5(pid=19084): stderr: | �[0;m�[38;5;43m20221214120020523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214120020523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214120020524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214120020524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214120020525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214120020525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214120020525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:00:22.195473 run osmo-stp_10.42.42.5(pid=19084): stdout: | (launched: 2022-12-14_12:00:20.332241) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:00:22.329826 run osmo-stp_10.42.42.5(pid=19084): stderr: | �[0;m�[38;5;43m20221214120020523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214120020523 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214120020524 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214120020524 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214120020525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214120020525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214120020525 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:00:22.486717 run patchelf(pid=19087): Terminating (SIGINT) 12:00:22.670346 run patchelf(pid=19087): Terminated: ok {rc=0} 12:00:22.704238 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19084): Process ended prematurely: osmo-stp_10.42.42.5(pid=19084) [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19084)] [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:00:22.714327 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 12:00:22.777446 run osmo-hlr_10.42.42.2(pid=19081): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19081)] 12:00:22.829029 run osmo-hlr_10.42.42.2(pid=19081): stdout: | (launched: 2022-12-14_12:00:19.310633) 12:00:22.881251 run osmo-hlr_10.42.42.2(pid=19081): stderr: | �[0;m�[1;31m20221214120019506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214120019506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214120019506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214120019506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214120019506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214120019506 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214120019557 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214120019568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214120019568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214120019568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:00:22.925871 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19074): Terminating (SIGTERM) 12:00:22.968797 run iperf3-srv_10.42.42.10(pid=19075): Terminating (SIGTERM) 12:00:23.010693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19076): Terminating (SIGTERM) 12:00:23.052295 run iperf3-srv_10.42.42.10(pid=19077): Terminating (SIGTERM) 12:00:23.094127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19080): Terminating (SIGTERM) 12:00:23.135896 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19083): Terminating (SIGTERM) 12:00:23.178315 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19086): Terminating (SIGTERM) 12:00:23.187917 --- ParallelTerminationStrategy: PID 19074 died... 12:00:23.243805 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19074): Terminated: ok {rc=0} 12:00:23.253817 --- ParallelTerminationStrategy: PID 19075 died... 12:00:23.309293 run iperf3-srv_10.42.42.10(pid=19075): Terminated {rc=256} 12:00:23.319220 --- ParallelTerminationStrategy: PID 19076 died... 12:00:23.374856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19076): Terminated: ok {rc=0} 12:00:23.384794 --- ParallelTerminationStrategy: PID 19077 died... 12:00:23.440381 run iperf3-srv_10.42.42.10(pid=19077): Terminated {rc=256} 12:00:23.450307 --- ParallelTerminationStrategy: PID 19080 died... 12:00:23.505624 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19080): Terminated: ok {rc=0} 12:00:23.515586 --- ParallelTerminationStrategy: PID 19083 died... 12:00:23.571075 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19083): Terminated: ok {rc=0} 12:00:23.581210 --- ParallelTerminationStrategy: PID 19086 died... 12:00:23.636616 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19086): Terminated: ok {rc=0} 12:00:23.723361 bus /gobi_0: Setting Powered False 12:00:24.829598 bus /gobi_0: Setting Powered False 12:00:25.937469 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19084): Process ended prematurely: osmo-stp_10.42.42.5(pid=19084) [trial-2404↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19084)]