Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=21083): Process ended prematurely: osmo-stp_10.42.42.5(pid=21083) [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21083)]
Standard Output
---------------------------------------------- trial-2381 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 19:52:37.795533 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:37.807350 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:52:37.954518 tst cs_paging_gprs_active.py: using LAC 31117 19:52:38.073828 tst cs_paging_gprs_active.py: using RAC 7 19:52:38.198229 tst cs_paging_gprs_active.py: using CellId 31117 19:52:38.314021 tst cs_paging_gprs_active.py: using BVCI 31118 19:52:38.336705 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.347970 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.359119 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.370299 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.381533 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.392527 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.403706 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.414782 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:52:38.426105 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:52:38.543412 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:52:38.819047 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:52:38.943957 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:52:39.256288 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21073): Launched 19:52:39.515132 run iperf3-srv_10.42.42.10(pid=21074): Launched 19:52:39.697490 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:52:39.821797 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:52:40.133866 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21075): Launched 19:52:40.393752 run iperf3-srv_10.42.42.10(pid=21076): Launched 19:52:40.575859 tst cs_paging_gprs_active.py:38: start network... 19:52:40.699703 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:52:41.182056 run create_hlr_db(pid=21077): Launched 19:52:41.355011 bus /gobi_6: Setting Powered False 19:52:42.377451 run create_hlr_db(pid=21077): Terminated: ok {rc=0} 19:52:42.808523 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21079): Launched 19:52:43.132189 run osmo-hlr_10.42.42.2(pid=21080): Launched 19:52:43.252548 run osmo-stp_10.42.42.5: Starting osmo-stp 19:52:43.812768 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21082): Launched 19:52:44.135123 run osmo-stp_10.42.42.5(pid=21083): Launched 19:52:44.252148 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:52:44.814984 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21085): Launched 19:52:44.929799 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:52:45.212575 run patchelf(pid=21086): Launched 19:52:45.401675 run osmo-stp_10.42.42.5(pid=21083): ERR: Terminated: ERROR {rc=1} [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21083)] 19:52:45.539682 run osmo-stp_10.42.42.5(pid=21083): stdout: | (launched: 2022-12-12_19:52:43.976166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:52:45.678589 run osmo-stp_10.42.42.5(pid=21083): stderr: | �[0;m�[38;5;43m20221212195244164 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195244164 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195244164 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195244164 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195244165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195244165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195244165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:52:45.811430 run osmo-stp_10.42.42.5(pid=21083): stdout: | (launched: 2022-12-12_19:52:43.976166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:52:45.959098 run osmo-stp_10.42.42.5(pid=21083): stderr: | �[0;m�[38;5;43m20221212195244164 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212195244164 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212195244164 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212195244164 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212195244165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212195244165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212195244165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:52:46.107439 run patchelf(pid=21086): Terminating (SIGINT) 19:52:46.281660 run patchelf(pid=21086): Terminated: ok {rc=0} 19:52:46.314471 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21083): Process ended prematurely: osmo-stp_10.42.42.5(pid=21083) [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21083)] [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 19:52:46.324353 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:52:46.387850 run osmo-hlr_10.42.42.2(pid=21080): ERR: Terminated: ERROR {rc=237} [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21080)] 19:52:46.438775 run osmo-hlr_10.42.42.2(pid=21080): stdout: | (launched: 2022-12-12_19:52:42.972686) 19:52:46.490594 run osmo-hlr_10.42.42.2(pid=21080): stderr: | �[0;m�[1;31m20221212195243168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212195243168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212195243168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212195243168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212195243168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212195243168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212195243184 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212195243195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212195243195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212195243195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:52:46.534339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21073): Terminating (SIGTERM) 19:52:46.576518 run iperf3-srv_10.42.42.10(pid=21074): Terminating (SIGTERM) 19:52:46.620227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21075): Terminating (SIGTERM) 19:52:46.661896 run iperf3-srv_10.42.42.10(pid=21076): Terminating (SIGTERM) 19:52:46.704241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21079): Terminating (SIGTERM) 19:52:46.746823 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21082): Terminating (SIGTERM) 19:52:46.793291 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21085): Terminating (SIGTERM) 19:52:46.803864 --- ParallelTerminationStrategy: PID 21073 died... 19:52:46.860755 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21073): Terminated: ok {rc=0} 19:52:46.871746 --- ParallelTerminationStrategy: PID 21074 died... 19:52:46.929118 run iperf3-srv_10.42.42.10(pid=21074): Terminated {rc=256} 19:52:46.940452 --- ParallelTerminationStrategy: PID 21075 died... 19:52:46.996143 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21075): Terminated: ok {rc=0} 19:52:47.006135 --- ParallelTerminationStrategy: PID 21076 died... 19:52:47.061044 run iperf3-srv_10.42.42.10(pid=21076): Terminated {rc=256} 19:52:47.071578 --- ParallelTerminationStrategy: PID 21079 died... 19:52:47.126254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21079): Terminated: ok {rc=0} 19:52:47.136298 --- ParallelTerminationStrategy: PID 21082 died... 19:52:47.191849 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21082): Terminated: ok {rc=0} 19:52:47.201959 --- ParallelTerminationStrategy: PID 21085 died... 19:52:47.255718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21085): Terminated: ok {rc=0} 19:52:47.339173 bus /gobi_0: Setting Powered False 19:52:48.446564 bus /gobi_0: Setting Powered False 19:52:49.558223 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21083): Process ended prematurely: osmo-stp_10.42.42.5(pid=21083) [trial-2381↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21083)]