Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7985): Process ended prematurely: osmo-stp_10.42.42.5(pid=7985) [trial-2395↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7985)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 22:25:56.691353 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:56.702589 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:25:56.866466 tst cs_paging_gprs_active.py: using LAC 36639 22:25:56.989959 tst cs_paging_gprs_active.py: using RAC 174 22:25:57.111043 tst cs_paging_gprs_active.py: using CellId 36639 22:25:57.231524 tst cs_paging_gprs_active.py: using BVCI 36640 22:25:57.254772 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.265470 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.275994 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.286586 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.297542 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.308356 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.319196 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.329871 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:25:57.340611 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:25:57.460187 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:25:57.737958 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:25:57.863565 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:25:58.177715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7975): Launched 22:25:58.436749 run iperf3-srv_10.42.42.10(pid=7976): Launched 22:25:58.620418 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:25:58.746043 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:25:59.059358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7977): Launched 22:25:59.319172 run iperf3-srv_10.42.42.10(pid=7978): Launched 22:25:59.503433 tst cs_paging_gprs_active.py:38: start network... 22:25:59.629351 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:26:00.114930 run create_hlr_db(pid=7979): Launched 22:26:00.289513 bus /gobi_6: Setting Powered False 22:26:01.326283 run create_hlr_db(pid=7979): Terminated: ok {rc=0} 22:26:01.791557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7981): Launched 22:26:02.155726 run osmo-hlr_10.42.42.2(pid=7982): Launched 22:26:02.283308 run osmo-stp_10.42.42.5: Starting osmo-stp 22:26:02.844816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7984): Launched 22:26:03.170594 run osmo-stp_10.42.42.5(pid=7985): Launched 22:26:03.289170 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:26:03.855882 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7987): Launched 22:26:03.973200 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:26:04.263428 run patchelf(pid=7988): Launched 22:26:04.453893 run osmo-stp_10.42.42.5(pid=7985): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7985)] 22:26:04.592780 run osmo-stp_10.42.42.5(pid=7985): stdout: | (launched: 2022-12-13_22:26:03.011300) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:26:04.732059 run osmo-stp_10.42.42.5(pid=7985): stderr: | �[0;m�[38;5;43m20221213222603203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213222603203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213222603203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213222603204 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213222603204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213222603204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213222603204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:26:04.866590 run osmo-stp_10.42.42.5(pid=7985): stdout: | (launched: 2022-12-13_22:26:03.011300) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:26:05.000575 run osmo-stp_10.42.42.5(pid=7985): stderr: | �[0;m�[38;5;43m20221213222603203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213222603203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213222603203 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213222603204 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213222603204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213222603204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213222603204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:26:05.155921 run patchelf(pid=7988): Terminating (SIGINT) 22:26:05.338019 run patchelf(pid=7988): Terminated: ok {rc=0} 22:26:05.371226 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7985): Process ended prematurely: osmo-stp_10.42.42.5(pid=7985) [trial-2395↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7985)] [trial-2395↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 22:26:05.381150 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:26:05.444311 run osmo-hlr_10.42.42.2(pid=7982): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7982)] 22:26:05.496103 run osmo-hlr_10.42.42.2(pid=7982): stdout: | (launched: 2022-12-13_22:26:01.964906) 22:26:05.548086 run osmo-hlr_10.42.42.2(pid=7982): stderr: | �[0;m�[1;31m20221213222602243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213222602243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213222602243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213222602243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213222602243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213222602243 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213222602255 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213222602264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213222602264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213222602264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:26:05.592455 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7975): Terminating (SIGTERM) 22:26:05.634188 run iperf3-srv_10.42.42.10(pid=7976): Terminating (SIGTERM) 22:26:05.675883 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7977): Terminating (SIGTERM) 22:26:05.717587 run iperf3-srv_10.42.42.10(pid=7978): Terminating (SIGTERM) 22:26:05.759239 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7981): Terminating (SIGTERM) 22:26:05.800900 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7984): Terminating (SIGTERM) 22:26:05.842615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7987): Terminating (SIGTERM) 22:26:05.852299 --- ParallelTerminationStrategy: PID 7975 died... 22:26:05.908690 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7975): Terminated: ok {rc=0} 22:26:05.918840 --- ParallelTerminationStrategy: PID 7976 died... 22:26:05.974619 run iperf3-srv_10.42.42.10(pid=7976): Terminated {rc=256} 22:26:05.984620 --- ParallelTerminationStrategy: PID 7977 died... 22:26:06.040469 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7977): Terminated: ok {rc=0} 22:26:06.050476 --- ParallelTerminationStrategy: PID 7978 died... 22:26:06.106249 run iperf3-srv_10.42.42.10(pid=7978): Terminated {rc=256} 22:26:06.116267 --- ParallelTerminationStrategy: PID 7981 died... 22:26:06.171972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7981): Terminated: ok {rc=0} 22:26:06.182043 --- ParallelTerminationStrategy: PID 7984 died... 22:26:06.237819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7984): Terminated: ok {rc=0} 22:26:06.247865 --- ParallelTerminationStrategy: PID 7987 died... 22:26:06.303590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7987): Terminated: ok {rc=0} 22:26:06.390407 bus /gobi_0: Setting Powered False 22:26:07.496257 bus /gobi_0: Setting Powered False 22:26:08.605132 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7985): Process ended prematurely: osmo-stp_10.42.42.5(pid=7985) [trial-2395↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7985)]