Failed
dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=25663): Process ended prematurely: osmo-stp_10.42.42.5(pid=25663) [trial-2405↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25663)]
Standard Output
---------------------------------------------- trial-2405 dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 13:10:59.953306 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:10:59.964611 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 13:11:00.118178 tst switch_tch_pdch.py: using LAC 41122 13:11:00.236465 tst switch_tch_pdch.py: using RAC 67 13:11:00.353349 tst switch_tch_pdch.py: using CellId 41122 13:11:00.467115 tst switch_tch_pdch.py: using BVCI 41123 13:11:00.489790 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:11:00.500849 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:11:00.511771 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:11:00.522600 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:11:00.533230 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:11:00.544001 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:11:00.554861 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:11:00.565595 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:11:00.684837 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:11:00.960720 tst switch_tch_pdch.py:51: start network... 13:11:01.086624 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:11:01.609359 run create_hlr_db(pid=25657): Launched 13:11:01.785253 bus /gobi_6: Setting Powered False 13:11:02.800786 run create_hlr_db(pid=25657): Terminated: ok {rc=0} 13:11:03.220632 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25659): Launched 13:11:03.536813 run osmo-hlr_10.42.42.2(pid=25660): Launched 13:11:03.654358 run osmo-stp_10.42.42.5: Starting osmo-stp 13:11:04.203906 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25662): Launched 13:11:04.520422 run osmo-stp_10.42.42.5(pid=25663): Launched 13:11:04.636052 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:11:05.186301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25665): Launched 13:11:05.299266 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:11:05.574301 run patchelf(pid=25666): Launched 13:11:05.758906 run osmo-stp_10.42.42.5(pid=25663): ERR: Terminated: ERROR {rc=1} [trial-2405↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25663)] 13:11:05.894057 run osmo-stp_10.42.42.5(pid=25663): stdout: | (launched: 2022-12-14_13:11:04.364601) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:11:06.029267 run osmo-stp_10.42.42.5(pid=25663): stderr: | �[0;m�[38;5;43m20221214131104555 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131104555 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131104556 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131104556 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131104556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131104557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131104557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:11:06.160048 run osmo-stp_10.42.42.5(pid=25663): stdout: | (launched: 2022-12-14_13:11:04.364601) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:11:06.290225 run osmo-stp_10.42.42.5(pid=25663): stderr: | �[0;m�[38;5;43m20221214131104555 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214131104555 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214131104556 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214131104556 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214131104556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214131104557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214131104557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:11:06.440851 run patchelf(pid=25666): Terminating (SIGINT) 13:11:06.617953 run patchelf(pid=25666): Terminated: ok {rc=0} 13:11:06.649919 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=25663): Process ended prematurely: osmo-stp_10.42.42.5(pid=25663) [trial-2405↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25663)] [trial-2405↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 13:11:06.658902 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 13:11:06.721503 run osmo-hlr_10.42.42.2(pid=25660): ERR: Terminated: ERROR {rc=237} [trial-2405↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25660)] 13:11:06.772698 run osmo-hlr_10.42.42.2(pid=25660): stdout: | (launched: 2022-12-14_13:11:03.381670) 13:11:06.824356 run osmo-hlr_10.42.42.2(pid=25660): stderr: | �[0;m�[1;31m20221214131103576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214131103576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214131103576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214131103576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214131103576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214131103576 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214131103588 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214131103596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214131103596 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214131103597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:11:06.868559 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25659): Terminating (SIGTERM) 13:11:06.910239 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25662): Terminating (SIGTERM) 13:11:06.952382 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25665): Terminating (SIGTERM) 13:11:06.961888 --- ParallelTerminationStrategy: PID 25659 died... 13:11:07.017980 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25659): Terminated: ok {rc=0} 13:11:07.027829 --- ParallelTerminationStrategy: PID 25662 died... 13:11:07.083682 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25662): Terminated: ok {rc=0} 13:11:07.093737 --- ParallelTerminationStrategy: PID 25665 died... 13:11:07.149531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25665): Terminated: ok {rc=0} 13:11:07.234941 bus /gobi_0: Setting Powered False 13:11:08.340016 bus /gobi_0: Setting Powered False 13:11:09.449712 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25663): Process ended prematurely: osmo-stp_10.42.42.5(pid=25663) [trial-2405↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25663)]