Skipping 176 KB..
Full Logchecking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmocodec >= 1.10.0... yes
checking for libosmocoding >= 1.10.0... yes
checking for libosmoabis >= 1.6.0... yes
checking for libosmotrau >= 1.6.0... yes
checking for libosmo-netif >= 1.5.0... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... yes
checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes
checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes
checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes
checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes
checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
checking whether to enable VTY/CTRL tests... no
checking whether to include systemtap tracing support... no
CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-lc15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/ta_control/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating tests/amr/Makefile
config.status: creating tests/csd/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/ber/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make all-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making all in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making all in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making all in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making all in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make all-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
CC gsm_data.o
CC sysinfo.o
CC abis.o
CC logging.o
CC abis_osmo.o
CC oml.o
CC osmux.o
CC bts.o
CC bts_sm.o
CC bts_trx.o
CC rsl.o
CC rtp_input_preen.o
CC vty.o
CC paging.o
CC measurement.o
CC amr.o
CC asci.o
CC lchan.o
CC load_indication.o
CC pcu_sock.o
CC handover.o
CC msg_utils.o
CC tx_power.o
CC bts_ctrl_commands.o
CC bts_ctrl_lookup.o
CC bts_shutdown_fsm.o
CC csd_rlp.o
CC csd_v110.o
CC l1sap.o
CC cbch.o
CC power_control.o
CC main.o
CC phy_link.o
CC dtx_dl_amr_fsm.o
CC scheduler_mframe.o
CC ta_control.o
CC nm_common_fsm.o
CC nm_bts_sm_fsm.o
CC nm_bts_fsm.o
CC nm_bb_transc_fsm.o
CC nm_channel_fsm.o
CC nm_gprs_cell_fsm.o
CC nm_gprs_nse_fsm.o
CC nm_gprs_nsvc_fsm.o
CC nm_radio_carrier_fsm.o
CC notification.o
CC scheduler.o
AR libl1sched.a
ar: `u' modifier ignored since `D' is the default (see `U')
AR libbts.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making all in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
CC main.o
CC bts_model.o
CC virtualbts_vty.o
CC scheduler_virtbts.o
CC l1_if.o
CC virtual_um.o
CC osmo_mcast_sock.o
CCLD osmo-bts-virtual
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making all in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
CC main.o
CC bts_model.o
CCLD osmo-bts-omldummy
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making all in osmo-bts-octphy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
CC main.o
CC l1_if.o
CC l1_oml.o
CC l1_tch.o
CC l1_utils.o
CC octphy_hw_api.o
CC octphy_vty.o
CC octpkt.o
../../../../src/osmo-bts-octphy/l1_oml.c: In function 'bts_model_change_power':
../../../../src/osmo-bts-octphy/l1_oml.c:1793:9: note: '#pragma message: Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016)'
1793 | #pragma message ("Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016)")
| ^~~~~~~
../../../../src/osmo-bts-octphy/l1_if.c: In function 'mph_info_req':
../../../../src/osmo-bts-octphy/l1_if.c:660:9: note: '#pragma message: Mode Modify is currently not supported for Octasic PHY (OS#3015)'
660 | #pragma message ("Mode Modify is currently not supported for Octasic PHY (OS#3015)")
| ^~~~~~~
CCLD osmo-bts-octphy
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making all in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making all in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making all in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making all in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making all in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making all in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making all in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making all in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making all in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making all in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making all in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making all in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making all in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making all in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making all in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making all in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making all in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
CC rtp_ber.o
CC rtp_gen_map.o
CCLD rtp_gen_map
CCLD rtp_ber
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making dvi in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making dvi in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making dvi in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making dvi in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making dvi in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making dvi in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making dvi in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making dvi in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making dvi in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making dvi in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making dvi in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making dvi in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making dvi in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making dvi in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making dvi in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making dvi in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making dvi in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making dvi in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making dvi in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making check in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making check in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make check-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making check in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making check in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making check in osmo-bts-octphy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making check in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making check in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make paging_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
CC stubs.o
CC paging_test.o
CCLD paging_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making check in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make cipher_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
CC cipher_test.o
CC stubs.o
CCLD cipher_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making check in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make agch_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
CC agch_test.o
CC stubs.o
CCLD agch_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making check in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make misc_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
CC misc_test.o
CC stubs.o
CCLD misc_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making check in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make handover_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
CC handover_test.o
CC stubs.o
CCLD handover_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making check in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make tx_power_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
CC tx_power_test.o
CC stubs.o
CCLD tx_power_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making check in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make ms_power_loop_test bs_power_loop_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
CC stubs.o
CC ms_power_loop_test.o
CC bs_power_loop_test.o
CCLD bs_power_loop_test
CCLD ms_power_loop_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making check in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make meas_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
CC meas_test.o
CC stubs.o
CCLD meas_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making check in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make ta_control_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
CC ta_control_test.o
CCLD ta_control_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making check in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make amr_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
CC amr_test.o
CCLD amr_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making check in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make csd_test
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
CC csd_test.o
CCLD csd_test
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## ----------------------------------- ##
## osmo-bts 1.8.0.28-c963f test suite. ##
## ----------------------------------- ##
Regression tests.
1: paging ok
2: agch ok
3: cipher ok
4: misc ok
5: handover ok
6: ms_power_loop ok
7: bs_power_loop ok
8: tx_power ok
9: meas ok
10: ta_control ok
11: amr ok
12: csd ok
## ------------- ##
## Test results. ##
## ------------- ##
All 12 tests were successful.
make python-tests
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
echo "Not running python-based tests (determined at configure-time)"
Not running python-based tests (determined at configure-time)
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making check in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making check in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making install in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-virtual /build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-virtual
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making install in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-omldummy /build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-omldummy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making install in osmo-bts-octphy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-octphy '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-octphy /build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-octphy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making install in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making install in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making install in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making install in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making install in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making install in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making install in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making install in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making install in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making install in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-octphy'
/usr/bin/install -c -m 644 ../../../../doc/examples/octphy/osmo-bts-trx2dsp1.cfg ../../../../doc/examples/octphy/osmo-bts-octphy.cfg '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-octphy'
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg ../../../../doc/examples/octphy/osmo-bts-octphy.cfg '/build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-bts-virtual.service '/build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making install in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making installcheck in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making installcheck in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making installcheck in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making installcheck in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making installcheck in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making installcheck in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making installcheck in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making installcheck in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making installcheck in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making installcheck in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making installcheck in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making installcheck in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making installcheck in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making installcheck in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making installcheck in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making installcheck in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-bts-1.8.0.28-c963f/_inst/bin' \
## ----------------------------------- ##
## osmo-bts 1.8.0.28-c963f test suite. ##
## ----------------------------------- ##
Regression tests.
1: paging ok
2: agch ok
3: cipher ok
4: misc ok
5: handover ok
6: ms_power_loop ok
7: bs_power_loop ok
8: tx_power ok
9: meas ok
10: ta_control ok
11: amr ok
12: csd ok
## ------------- ##
## Test results. ##
## ------------- ##
All 12 tests were successful.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making installcheck in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making uninstall in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-virtual )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making uninstall in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-omldummy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making uninstall in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-octphy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making uninstall in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making uninstall in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making uninstall in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making uninstall in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making uninstall in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making uninstall in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making uninstall in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making uninstall in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making uninstall in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making uninstall in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-octphy' && rm -f osmo-bts-trx2dsp1.cfg osmo-bts-octphy.cfg )
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom' && rm -f osmo-bts-virtual.cfg osmo-bts-octphy.cfg )
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual' && rm -f osmo-bts-virtual.cfg )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system' && rm -f osmo-bts-virtual.service )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making uninstall in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making install in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-virtual /tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-virtual
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making install in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-omldummy /tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-omldummy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making install in osmo-bts-octphy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-octphy '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-octphy /tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-octphy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making install in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making install in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making install in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making install in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making install in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making install in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making install in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making install in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making install in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making install in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-octphy'
/usr/bin/mkdir -p '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/mkdir -p '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/octphy/osmo-bts-trx2dsp1.cfg ../../../../doc/examples/octphy/osmo-bts-octphy.cfg '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-octphy'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg ../../../../doc/examples/octphy/osmo-bts-octphy.cfg '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-bts-virtual.service '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making install in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making uninstall in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
( cd '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-virtual )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making uninstall in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
( cd '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-omldummy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making uninstall in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
( cd '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-octphy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making uninstall in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making uninstall in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making uninstall in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making uninstall in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making uninstall in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making uninstall in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making uninstall in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making uninstall in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making uninstall in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making uninstall in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
( cd '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-octphy' && rm -f osmo-bts-trx2dsp1.cfg osmo-bts-octphy.cfg )
( cd '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual' && rm -f osmo-bts-virtual.cfg )
( cd '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom' && rm -f osmo-bts-virtual.cfg osmo-bts-octphy.cfg )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-43859//build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system' && rm -f osmo-bts-virtual.service )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making uninstall in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
if test -d "osmo-bts-1.8.0.28-c963f"; then find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.28-c963f" || { sleep 5 && rm -rf "osmo-bts-1.8.0.28-c963f"; }; else :; fi
test -d "osmo-bts-1.8.0.28-c963f" || mkdir "osmo-bts-1.8.0.28-c963f"
(cd include && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
(cd osmo-bts && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/include/osmo-bts \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
(cd src && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
(cd common && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/common \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
(cd osmo-bts-virtual && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-virtual \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
(cd osmo-bts-omldummy && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-omldummy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
(cd osmo-bts-sysmo && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-sysmo \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
(cd osmo-bts-trx && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-trx \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
(cd osmo-bts-octphy && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-octphy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
(cd osmo-bts-lc15 && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-lc15 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
(cd osmo-bts-oc2g && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-oc2g \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
(cd tests && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
(cd paging && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/paging \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
(cd cipher && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/cipher \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
(cd agch && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/agch \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
(cd misc && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/misc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
(cd handover && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/handover \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
(cd tx_power && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/tx_power \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
(cd power && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/power \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
(cd meas && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/meas \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
(cd ta_control && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/ta_control \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
(cd amr && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/amr \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
(cd csd && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/csd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
(cd sysmobts && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/sysmobts \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
(cd doc && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
(cd contrib && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
(cd ber && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/contrib/ber \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make \
top_distdir="osmo-bts-1.8.0.28-c963f" distdir="osmo-bts-1.8.0.28-c963f" \
dist-hook
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
echo 1.8.0.28-c963f > osmo-bts-1.8.0.28-c963f/.tarball-version
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
test -n "" \
|| find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-bts-1.8.0.28-c963f/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-bts-1.8.0.28-c963f"
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
tardir=osmo-bts-1.8.0.28-c963f && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-bts-1.8.0.28-c963f.tar.bz2
tardir=osmo-bts-1.8.0.28-c963f && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-bts-1.8.0.28-c963f.tar.gz
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
if test -d "osmo-bts-1.8.0.28-c963f"; then find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.28-c963f" || { sleep 5 && rm -rf "osmo-bts-1.8.0.28-c963f"; }; else :; fi
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making distclean in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../include/osmo-bts" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making distclean in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
rm -rf .libs _libs
test -z "libbts.a libl1sched.a" || rm -f libbts.a libl1sched.a
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/common" || test -z "" || rm -f
rm -f ./.deps/abis.Po
rm -f ./.deps/abis_osmo.Po
rm -f ./.deps/amr.Po
rm -f ./.deps/asci.Po
rm -f ./.deps/bts.Po
rm -f ./.deps/bts_ctrl_commands.Po
rm -f ./.deps/bts_ctrl_lookup.Po
rm -f ./.deps/bts_shutdown_fsm.Po
rm -f ./.deps/bts_sm.Po
rm -f ./.deps/bts_trx.Po
rm -f ./.deps/cbch.Po
rm -f ./.deps/csd_rlp.Po
rm -f ./.deps/csd_v110.Po
rm -f ./.deps/dtx_dl_amr_fsm.Po
rm -f ./.deps/gsm_data.Po
rm -f ./.deps/handover.Po
rm -f ./.deps/l1sap.Po
rm -f ./.deps/lchan.Po
rm -f ./.deps/load_indication.Po
rm -f ./.deps/logging.Po
rm -f ./.deps/main.Po
rm -f ./.deps/measurement.Po
rm -f ./.deps/msg_utils.Po
rm -f ./.deps/nm_bb_transc_fsm.Po
rm -f ./.deps/nm_bts_fsm.Po
rm -f ./.deps/nm_bts_sm_fsm.Po
rm -f ./.deps/nm_channel_fsm.Po
rm -f ./.deps/nm_common_fsm.Po
rm -f ./.deps/nm_gprs_cell_fsm.Po
rm -f ./.deps/nm_gprs_nse_fsm.Po
rm -f ./.deps/nm_gprs_nsvc_fsm.Po
rm -f ./.deps/nm_radio_carrier_fsm.Po
rm -f ./.deps/notification.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/osmux.Po
rm -f ./.deps/paging.Po
rm -f ./.deps/pcu_sock.Po
rm -f ./.deps/phy_link.Po
rm -f ./.deps/power_control.Po
rm -f ./.deps/rsl.Po
rm -f ./.deps/rtp_input_preen.Po
rm -f ./.deps/scheduler.Po
rm -f ./.deps/scheduler_mframe.Po
rm -f ./.deps/sysinfo.Po
rm -f ./.deps/ta_control.Po
rm -f ./.deps/tx_power.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making distclean in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-virtual
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-virtual" || test -z "" || rm -f
rm -f ./.deps/bts_model.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/osmo_mcast_sock.Po
rm -f ./.deps/scheduler_virtbts.Po
rm -f ./.deps/virtual_um.Po
rm -f ./.deps/virtualbts_vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making distclean in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-omldummy
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-omldummy" || test -z "" || rm -f
rm -f ./.deps/bts_model.Po
rm -f ./.deps/main.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making distclean in osmo-bts-sysmo
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-sysmo" || test -z "" || rm -f
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_fwd_main.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_fwd.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts-calib.Po
rm -f ./.deps/sysmobts-layer1.Po
rm -f ./.deps/sysmobts_ctrl.Po
rm -f ./.deps/sysmobts_mgr.Po
rm -f ./.deps/sysmobts_mgr_2050.Po
rm -f ./.deps/sysmobts_mgr_calib.Po
rm -f ./.deps/sysmobts_mgr_nl.Po
rm -f ./.deps/sysmobts_mgr_temp.Po
rm -f ./.deps/sysmobts_mgr_vty.Po
rm -f ./.deps/sysmobts_misc.Po
rm -f ./.deps/sysmobts_nl.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_util.Po
rm -f ./.deps/sysmobts_vty.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
Making distclean in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-trx
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-trx" || test -z "" || rm -f
rm -f ./.deps/amr_loop.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/sched_lchan_fcch_sch.Po
rm -f ./.deps/sched_lchan_pdtch.Po
rm -f ./.deps/sched_lchan_rach.Po
rm -f ./.deps/sched_lchan_tchf.Po
rm -f ./.deps/sched_lchan_tchh.Po
rm -f ./.deps/sched_lchan_xcch.Po
rm -f ./.deps/scheduler_trx.Po
rm -f ./.deps/trx_if.Po
rm -f ./.deps/trx_provision_fsm.Po
rm -f ./.deps/trx_vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
Making distclean in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f osmo-bts-octphy
test . = "../../../../src/osmo-bts-octphy" || test -z "" || rm -f
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_oml.Po
rm -f ./.deps/l1_tch.Po
rm -f ./.deps/l1_utils.Po
rm -f ./.deps/main.Po
rm -f ./.deps/octphy_hw_api.Po
rm -f ./.deps/octphy_vty.Po
rm -f ./.deps/octpkt.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
Making distclean in osmo-bts-lc15
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f osmo-bts-lc15 lc15bts-mgr lc15bts-util
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f misc/*.o
test . = "../../../../src/osmo-bts-lc15" || test -z "" || rm -f
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/lc15bts.Po
rm -f ./.deps/lc15bts_vty.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/lc15bts_bid.Po
rm -f misc/.deps/lc15bts_bts.Po
rm -f misc/.deps/lc15bts_clock.Po
rm -f misc/.deps/lc15bts_led.Po
rm -f misc/.deps/lc15bts_mgr.Po
rm -f misc/.deps/lc15bts_mgr_calib.Po
rm -f misc/.deps/lc15bts_mgr_nl.Po
rm -f misc/.deps/lc15bts_mgr_temp.Po
rm -f misc/.deps/lc15bts_mgr_vty.Po
rm -f misc/.deps/lc15bts_misc.Po
rm -f misc/.deps/lc15bts_nl.Po
rm -f misc/.deps/lc15bts_par.Po
rm -f misc/.deps/lc15bts_power.Po
rm -f misc/.deps/lc15bts_swd.Po
rm -f misc/.deps/lc15bts_temp.Po
rm -f misc/.deps/lc15bts_util.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
Making distclean in osmo-bts-oc2g
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f osmo-bts-oc2g oc2gbts-mgr oc2gbts-util
rm -f misc/*.o
test . = "../../../../src/osmo-bts-oc2g" || test -z "" || rm -f
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oc2gbts.Po
rm -f ./.deps/oc2gbts_vty.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/oc2gbts_bid.Po
rm -f misc/.deps/oc2gbts_bts.Po
rm -f misc/.deps/oc2gbts_clock.Po
rm -f misc/.deps/oc2gbts_led.Po
rm -f misc/.deps/oc2gbts_mgr.Po
rm -f misc/.deps/oc2gbts_mgr_calib.Po
rm -f misc/.deps/oc2gbts_mgr_nl.Po
rm -f misc/.deps/oc2gbts_mgr_temp.Po
rm -f misc/.deps/oc2gbts_mgr_vty.Po
rm -f misc/.deps/oc2gbts_misc.Po
rm -f misc/.deps/oc2gbts_nl.Po
rm -f misc/.deps/oc2gbts_par.Po
rm -f misc/.deps/oc2gbts_power.Po
rm -f misc/.deps/oc2gbts_swd.Po
rm -f misc/.deps/oc2gbts_temp.Po
rm -f misc/.deps/oc2gbts_util.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../src" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making distclean in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making distclean in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f paging_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/paging" || test -z "" || rm -f
rm -f ./.deps/paging_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making distclean in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f cipher_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/cipher" || test -z "" || rm -f
rm -f ./.deps/cipher_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making distclean in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f agch_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/agch" || test -z "" || rm -f
rm -f ./.deps/agch_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making distclean in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f misc_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/misc" || test -z "" || rm -f
rm -f ./.deps/misc_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making distclean in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f handover_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/handover" || test -z "" || rm -f
rm -f ./.deps/handover_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making distclean in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f tx_power_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/tx_power" || test -z "" || rm -f
rm -f ./.deps/stubs.Po
rm -f ./.deps/tx_power_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making distclean in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f ms_power_loop_test bs_power_loop_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/power" || test -z "" || rm -f
rm -f ./.deps/bs_power_loop_test.Po
rm -f ./.deps/ms_power_loop_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making distclean in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f meas_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/meas" || test -z "" || rm -f
rm -f ./.deps/meas_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making distclean in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f ta_control_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/ta_control" || test -z "" || rm -f
rm -f ./.deps/ta_control_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making distclean in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f amr_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/amr" || test -z "" || rm -f
rm -f ./.deps/amr_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making distclean in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f csd_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/csd" || test -z "" || rm -f
rm -f ./.deps/csd_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
Making distclean in sysmobts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f sysmobts_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/sysmobts" || test -z "" || rm -f
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_test.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../tests" || test -z "" || rm -f
test -z "atconfig" || rm -f atconfig
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making distclean in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/manuals" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../contrib/systemd" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making distclean in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f rtp_ber rtp_gen_map
test . = "../../../../contrib/ber" || test -z "" || rm -f
rm -f ./.deps/rtp_ber.Po
rm -f ./.deps/rtp_gen_map.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f btsconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || test -z "" || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
if test -d "osmo-bts-1.8.0.28-c963f"; then find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.28-c963f" || { sleep 5 && rm -rf "osmo-bts-1.8.0.28-c963f"; }; else :; fi
=========================================================
osmo-bts-1.8.0.28-c963f archives ready for distribution:
osmo-bts-1.8.0.28-c963f.tar.gz
osmo-bts-1.8.0.28-c963f.tar.bz2
=========================================================
+ [ 0 = 1 ]
+ make -j 12 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmo-bts
make[2]: Entering directory '/build/include/osmo-bts'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/include/osmo-bts'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
Making maintainer-clean in common
make[2]: Entering directory '/build/src/common'
rm -rf .libs _libs
test -z "libbts.a libl1sched.a" || rm -f libbts.a libl1sched.a
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/abis.Po
rm -f ./.deps/abis_osmo.Po
rm -f ./.deps/amr.Po
rm -f ./.deps/asci.Po
rm -f ./.deps/bts.Po
rm -f ./.deps/bts_ctrl_commands.Po
rm -f ./.deps/bts_ctrl_lookup.Po
rm -f ./.deps/bts_shutdown_fsm.Po
rm -f ./.deps/bts_sm.Po
rm -f ./.deps/bts_trx.Po
rm -f ./.deps/cbch.Po
rm -f ./.deps/csd_rlp.Po
rm -f ./.deps/csd_v110.Po
rm -f ./.deps/dtx_dl_amr_fsm.Po
rm -f ./.deps/gsm_data.Po
rm -f ./.deps/handover.Po
rm -f ./.deps/l1sap.Po
rm -f ./.deps/lchan.Po
rm -f ./.deps/load_indication.Po
rm -f ./.deps/logging.Po
rm -f ./.deps/main.Po
rm -f ./.deps/measurement.Po
rm -f ./.deps/msg_utils.Po
rm -f ./.deps/nm_bb_transc_fsm.Po
rm -f ./.deps/nm_bts_fsm.Po
rm -f ./.deps/nm_bts_sm_fsm.Po
rm -f ./.deps/nm_channel_fsm.Po
rm -f ./.deps/nm_common_fsm.Po
rm -f ./.deps/nm_gprs_cell_fsm.Po
rm -f ./.deps/nm_gprs_nse_fsm.Po
rm -f ./.deps/nm_gprs_nsvc_fsm.Po
rm -f ./.deps/nm_radio_carrier_fsm.Po
rm -f ./.deps/notification.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/osmux.Po
rm -f ./.deps/paging.Po
rm -f ./.deps/pcu_sock.Po
rm -f ./.deps/phy_link.Po
rm -f ./.deps/power_control.Po
rm -f ./.deps/rsl.Po
rm -f ./.deps/rtp_input_preen.Po
rm -f ./.deps/scheduler.Po
rm -f ./.deps/scheduler_mframe.Po
rm -f ./.deps/sysinfo.Po
rm -f ./.deps/ta_control.Po
rm -f ./.deps/tx_power.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/common'
Making maintainer-clean in osmo-bts-virtual
make[2]: Entering directory '/build/src/osmo-bts-virtual'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-virtual
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bts_model.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/osmo_mcast_sock.Po
rm -f ./.deps/scheduler_virtbts.Po
rm -f ./.deps/virtual_um.Po
rm -f ./.deps/virtualbts_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-virtual'
Making maintainer-clean in osmo-bts-omldummy
make[2]: Entering directory '/build/src/osmo-bts-omldummy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-omldummy
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bts_model.Po
rm -f ./.deps/main.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-omldummy'
Making maintainer-clean in osmo-bts-sysmo
make[2]: Entering directory '/build/src/osmo-bts-sysmo'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_fwd_main.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_fwd.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts-calib.Po
rm -f ./.deps/sysmobts-layer1.Po
rm -f ./.deps/sysmobts_ctrl.Po
rm -f ./.deps/sysmobts_mgr.Po
rm -f ./.deps/sysmobts_mgr_2050.Po
rm -f ./.deps/sysmobts_mgr_calib.Po
rm -f ./.deps/sysmobts_mgr_nl.Po
rm -f ./.deps/sysmobts_mgr_temp.Po
rm -f ./.deps/sysmobts_mgr_vty.Po
rm -f ./.deps/sysmobts_misc.Po
rm -f ./.deps/sysmobts_nl.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_util.Po
rm -f ./.deps/sysmobts_vty.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-sysmo'
Making maintainer-clean in osmo-bts-trx
make[2]: Entering directory '/build/src/osmo-bts-trx'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f osmo-bts-trx
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/amr_loop.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/sched_lchan_fcch_sch.Po
rm -f ./.deps/sched_lchan_pdtch.Po
rm -f ./.deps/sched_lchan_rach.Po
rm -f ./.deps/sched_lchan_tchf.Po
rm -f ./.deps/sched_lchan_tchh.Po
rm -f ./.deps/sched_lchan_xcch.Po
rm -f ./.deps/scheduler_trx.Po
rm -f ./.deps/trx_if.Po
rm -f ./.deps/trx_provision_fsm.Po
rm -f ./.deps/trx_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-trx'
Making maintainer-clean in osmo-bts-octphy
make[2]: Entering directory '/build/src/osmo-bts-octphy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-octphy
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_oml.Po
rm -f ./.deps/l1_tch.Po
rm -f ./.deps/l1_utils.Po
rm -f ./.deps/main.Po
rm -f ./.deps/octphy_hw_api.Po
rm -f ./.deps/octphy_vty.Po
rm -f ./.deps/octpkt.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-octphy'
Making maintainer-clean in osmo-bts-lc15
make[2]: Entering directory '/build/src/osmo-bts-lc15'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-lc15 lc15bts-mgr lc15bts-util
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -f misc/*.o
rm -f misc/.deps/.dirstamp
it deletes files that may require special tools to rebuild.
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/lc15bts.Po
rm -f ./.deps/lc15bts_vty.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/lc15bts_bid.Po
rm -f misc/.deps/lc15bts_bts.Po
rm -f misc/.deps/lc15bts_clock.Po
rm -f misc/.deps/lc15bts_led.Po
rm -f misc/.deps/lc15bts_mgr.Po
rm -f misc/.deps/lc15bts_mgr_calib.Po
rm -f misc/.deps/lc15bts_mgr_nl.Po
rm -f misc/.deps/lc15bts_mgr_temp.Po
rm -f misc/.deps/lc15bts_mgr_vty.Po
rm -f misc/.deps/lc15bts_misc.Po
rm -f misc/.deps/lc15bts_nl.Po
rm -f misc/.deps/lc15bts_par.Po
rm -f misc/.deps/lc15bts_power.Po
rm -f misc/.deps/lc15bts_swd.Po
rm -f misc/.deps/lc15bts_temp.Po
rm -f misc/.deps/lc15bts_util.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-lc15'
Making maintainer-clean in osmo-bts-oc2g
make[2]: Entering directory '/build/src/osmo-bts-oc2g'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-oc2g oc2gbts-mgr oc2gbts-util
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f misc/*.o
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -f misc/.deps/.dirstamp
it deletes files that may require special tools to rebuild.
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oc2gbts.Po
rm -f ./.deps/oc2gbts_vty.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/oc2gbts_bid.Po
rm -f misc/.deps/oc2gbts_bts.Po
rm -f misc/.deps/oc2gbts_clock.Po
rm -f misc/.deps/oc2gbts_led.Po
rm -f misc/.deps/oc2gbts_mgr.Po
rm -f misc/.deps/oc2gbts_mgr_calib.Po
rm -f misc/.deps/oc2gbts_mgr_nl.Po
rm -f misc/.deps/oc2gbts_mgr_temp.Po
rm -f misc/.deps/oc2gbts_mgr_vty.Po
rm -f misc/.deps/oc2gbts_misc.Po
rm -f misc/.deps/oc2gbts_nl.Po
rm -f misc/.deps/oc2gbts_par.Po
rm -f misc/.deps/oc2gbts_power.Po
rm -f misc/.deps/oc2gbts_swd.Po
rm -f misc/.deps/oc2gbts_temp.Po
rm -f misc/.deps/oc2gbts_util.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-oc2g'
make[2]: Entering directory '/build/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/src'
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
Making maintainer-clean in paging
make[2]: Entering directory '/build/tests/paging'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f paging_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/paging_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/paging'
Making maintainer-clean in cipher
make[2]: Entering directory '/build/tests/cipher'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f cipher_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/cipher_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/cipher'
Making maintainer-clean in agch
make[2]: Entering directory '/build/tests/agch'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f agch_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/agch_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/agch'
Making maintainer-clean in misc
make[2]: Entering directory '/build/tests/misc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f misc_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/misc_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/misc'
Making maintainer-clean in handover
make[2]: Entering directory '/build/tests/handover'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f handover_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/handover_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/handover'
Making maintainer-clean in tx_power
make[2]: Entering directory '/build/tests/tx_power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f tx_power_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/stubs.Po
rm -f ./.deps/tx_power_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/tx_power'
Making maintainer-clean in power
make[2]: Entering directory '/build/tests/power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f ms_power_loop_test bs_power_loop_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bs_power_loop_test.Po
rm -f ./.deps/ms_power_loop_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/power'
Making maintainer-clean in meas
make[2]: Entering directory '/build/tests/meas'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f meas_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/meas_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/meas'
Making maintainer-clean in ta_control
make[2]: Entering directory '/build/tests/ta_control'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f ta_control_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/ta_control_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/ta_control'
Making maintainer-clean in amr
make[2]: Entering directory '/build/tests/amr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f amr_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/amr_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/amr'
Making maintainer-clean in csd
make[2]: Entering directory '/build/tests/csd'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f csd_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/csd_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/csd'
Making maintainer-clean in sysmobts
make[2]: Entering directory '/build/tests/sysmobts'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f sysmobts_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_test.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/sysmobts'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
test -z "atconfig" || rm -f atconfig
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
Making maintainer-clean in ber
make[2]: Entering directory '/build/contrib/ber'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f rtp_ber rtp_gen_map
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/rtp_ber.Po
rm -f ./.deps/rtp_gen_map.Po
rm -f Makefile
make[2]: Leaving directory '/build/contrib/ber'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f btsconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing Makefile.in
Removing aclocal.m4
Removing btsconfig.h.in
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/ber/.deps/
Removing contrib/ber/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/layer1-headers
Skipping repository deps/libosmo-abis
Skipping repository deps/libosmo-netif
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing include/Makefile.in
Removing include/osmo-bts/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing missing
Removing osmo-bts-1.8.0.28-c963f.tar.bz2
Removing osmo-bts-1.8.0.28-c963f.tar.gz
Removing src/Makefile.in
Removing src/common/.deps/
Removing src/common/Makefile.in
Removing src/osmo-bts-lc15/.deps/
Removing src/osmo-bts-lc15/Makefile.in
Removing src/osmo-bts-lc15/misc/.deps/
Removing src/osmo-bts-oc2g/.deps/
Removing src/osmo-bts-oc2g/Makefile.in
Removing src/osmo-bts-oc2g/misc/.deps/
Removing src/osmo-bts-octphy/.deps/
Removing src/osmo-bts-octphy/Makefile.in
Removing src/osmo-bts-omldummy/.deps/
Removing src/osmo-bts-omldummy/Makefile.in
Removing src/osmo-bts-sysmo/.deps/
Removing src/osmo-bts-sysmo/Makefile.in
Removing src/osmo-bts-trx/.deps/
Removing src/osmo-bts-trx/Makefile.in
Removing src/osmo-bts-virtual/.deps/
Removing src/osmo-bts-virtual/Makefile.in
Removing tests/Makefile.in
Removing tests/agch/.deps/
Removing tests/agch/Makefile.in
Removing tests/amr/.deps/
Removing tests/amr/Makefile.in
Removing tests/cipher/.deps/
Removing tests/cipher/Makefile.in
Removing tests/csd/.deps/
Removing tests/csd/Makefile.in
Removing tests/handover/.deps/
Removing tests/handover/Makefile.in
Removing tests/meas/.deps/
Removing tests/meas/Makefile.in
Removing tests/misc/.deps/
Removing tests/misc/Makefile.in
Removing tests/package.m4
Removing tests/paging/.deps/
Removing tests/paging/Makefile.in
Removing tests/power/.deps/
Removing tests/power/Makefile.in
Removing tests/sysmobts/.deps/
Removing tests/sysmobts/Makefile.in
Removing tests/ta_control/.deps/
Removing tests/ta_control/Makefile.in
Removing tests/testsuite
Removing tests/tx_power/.deps/
Removing tests/tx_power/Makefile.in
+ [ -d /build/deps ]
+ git_clean /build/deps/layer1-headers
+ repos=/build/deps/layer1-headers
+ [ ! -d /build/deps/layer1-headers ]
+ [ ! -d /build/deps/layer1-headers/.git ]
+ git -C /build/deps/layer1-headers checkout -f HEAD
+ git -C /build/deps/layer1-headers clean -dxf
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing doc/Makefile
Removing doc/Makefile.in
Removing doc/examples/.libs/
Removing doc/examples/Makefile
Removing doc/examples/Makefile.in
Removing doc/examples/lapd-over-datagram-network
Removing doc/examples/lapd-over-datagram-user
Removing doc/examples/lapd-over-datagram/.deps/
Removing doc/examples/lapd-over-datagram/.dirstamp
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-network.o
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-user.o
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git_clean /build/deps/libosmo-netif
+ repos=/build/deps/libosmo-netif
+ [ ! -d /build/deps/libosmo-netif ]
+ [ ! -d /build/deps/libosmo-netif/.git ]
+ git -C /build/deps/libosmo-netif checkout -f HEAD
+ git -C /build/deps/libosmo-netif clean -dxf
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/ipa-stream-client
Removing examples/ipa-stream-client.o
Removing examples/ipa-stream-server
Removing examples/ipa-stream-server.o
Removing examples/osmux-test-input
Removing examples/osmux-test-input.o
Removing examples/osmux-test-output
Removing examples/osmux-test-output.o
Removing examples/rs232-read
Removing examples/rs232-read.o
Removing examples/rs232-write
Removing examples/rs232-write.o
Removing examples/rtp-udp-test-client
Removing examples/rtp-udp-test-client.o
Removing examples/rtp-udp-test-server
Removing examples/rtp-udp-test-server.o
Removing examples/stream-client
Removing examples/stream-client.o
Removing examples/stream-server
Removing examples/stream-server.o
Removing examples/udp-test-client
Removing examples/udp-test-client.o
Removing examples/udp-test-server
Removing examples/udp-test-server.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/netif/Makefile
Removing include/osmocom/netif/Makefile.in
Removing install-sh
Removing libosmo-netif.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/amr.lo
Removing src/amr.o
Removing src/datagram.lo
Removing src/datagram.o
Removing src/ipa.lo
Removing src/ipa.o
Removing src/ipa_unit.lo
Removing src/ipa_unit.o
Removing src/jibuf.lo
Removing src/jibuf.o
Removing src/libosmonetif.la
Removing src/osmux.lo
Removing src/osmux.o
Removing src/osmux_input.lo
Removing src/osmux_input.o
Removing src/osmux_output.lo
Removing src/osmux_output.o
Removing src/prim.lo
Removing src/prim.o
Removing src/rs232.lo
Removing src/rs232.o
Removing src/rtp.lo
Removing src/rtp.o
Removing src/sctp.lo
Removing src/sctp.o
Removing src/stream.lo
Removing src/stream.o
Removing src/stream_cli.lo
Removing src/stream_cli.o
Removing src/stream_srv.lo
Removing src/stream_srv.o
Removing stamp-h1
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/amr/.deps/
Removing tests/atconfig
Removing tests/jibuf/.deps/
Removing tests/osmo-pcap-test/.deps/
Removing tests/osmux/.deps/
Removing tests/stream/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/osmo-amr-inspect
Removing utils/osmo-amr-inspect.o
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
+ [ -d layer1-headers ]
[osmocom-gerrit] $ /bin/sh -xe /tmp/jenkins18033831327836415158.sh
+ rm -rf /home/osmocom-build/jenkins/workspace/gerrit-osmo-bts-build/BTS_MODEL/oct/FIRMWARE_VERSION/master/WITH_MANUALS/0/a4/default/label/osmocom-gerrit
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
