Skipping 1,198 KB..
Full Log neci 0
paging any use tch 0
mgw 0
bts 0
type osmo-bts
band DCS1800
cell_identity 0
location_area_code 0x0017
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
radio-link-timeout 32
channel allocator mode chan-req ascending
channel allocator mode assignment ascending
channel allocator mode handover ascending
channel allocator mode vgcs-vbs ascending
rach tx integer 9
rach max transmission 7
rach max-delay 63
rach expiry-timeout 32
channel-description attach 1
channel-description bs-pa-mfrms 5
channel-description bs-ag-blks-res 1
no nch-position
no access-control-class-ramping
early-classmark-sending forbidden
early-classmark-sending-3g allowed
ipa unit-id 1800 0
oml ipa stream-id 255 line 0
neighbor-list mode automatic
codec-support fr hr efr amr
amr tch-f modes 0 2 5 7
amr tch-f threshold ms 13 25 37
amr tch-f hysteresis ms 4 4 4
amr tch-f threshold bts 13 25 37
amr tch-f hysteresis bts 4 4 4
amr tch-f start-mode auto
amr tch-h modes 0 2 3 5
amr tch-h threshold ms 16 24 32
amr tch-h hysteresis ms 4 4 4
amr tch-h threshold bts 16 24 32
amr tch-h hysteresis bts 4 4 4
amr tch-h start-mode auto
gprs mode none
bs-power-control
mode static
ms-power-control
mode dyn-bts
ctrl-interval 2
step-size inc 4 red 2
rxlev-thresh lower 32 upper 38
rxlev-thresh-comp lower 10 12 upper 19 20
rxqual-thresh lower 3 upper 0
rxqual-thresh-comp lower 5 7 upper 15 18
ci-thresh fr-efr disable
ci-thresh fr-efr lower 13 upper 17
ci-thresh-comp fr-efr lower 5 7 upper 15 18
ci-thresh hr disable
ci-thresh hr lower 16 upper 21
ci-thresh-comp hr lower 5 7 upper 15 18
ci-thresh amr-fr disable
ci-thresh amr-fr lower 7 upper 11
ci-thresh-comp amr-fr lower 5 7 upper 15 18
ci-thresh amr-hr disable
ci-thresh amr-hr lower 13 upper 17
ci-thresh-comp amr-hr lower 5 7 upper 15 18
ci-thresh sdcch disable
ci-thresh sdcch lower 12 upper 16
ci-thresh-comp sdcch lower 5 7 upper 15 18
ci-thresh gprs disable
ci-thresh gprs lower 18 upper 24
ci-thresh-comp gprs lower 5 7 upper 15 18
trx 0
rf_locked 0
arfcn 868
nominal power 23
max_power_red 0
rsl e1 tei 0
timeslot 0
phys_chan_config TCH/F
hopping enabled 0
timeslot 1
phys_chan_config SDCCH8
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config TCH/F
hopping enabled 0
timeslot 5
phys_chan_config TCH/F
hopping enabled 0
timeslot 6
phys_chan_config TCH/F
hopping enabled 0
timeslot 7
phys_chan_config TCH/F
hopping enabled 0
msc 0
codec-list fr1 hr1 fr2 fr3 hr3
allow-emergency deny
amr-config 12_2k allowed
amr-config 10_2k allowed
amr-config 7_95k allowed
amr-config 7_40k allowed
amr-config 6_70k allowed
amr-config 5_90k allowed
amr-config 5_15k allowed
amr-config 4_75k allowed
amr-payload octet-aligned
asp-protocol m3ua
lcls-mode disabled
lcls-codec-mismatch forbidden
bsc
mid-call-timeout 0
end
OsmoBSC(config-net-bts-trx-ts)# phys_chan_config TCH/F
OsmoBSC(config-net-bts-trx-ts)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging timestamp 0
logging print level 1
logging print file basename last
logging level rll notice
logging level mm notice
logging level rr notice
logging level rsl notice
logging level nm notice
logging level pag notice
logging level meas notice
logging level msc notice
logging level ho notice
logging level hodec notice
logging level ref notice
logging level ctrl notice
logging level filter notice
logging level pcu notice
logging level lcls notice
logging level chan notice
logging level ts notice
logging level as notice
logging level cbs notice
logging level lcs notice
logging level asci notice
logging level reset notice
logging level loop notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
e1_line 0 port 0
cs7 instance 0
point-code 0.23.3
network
network country code 901
mobile network code 70
encryption a5 1 3
neci 0
paging any use tch 0
mgw 0
bts 0
type osmo-bts
band DCS1800
cell_identity 0
location_area_code 0x0017
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
radio-link-timeout 32
channel allocator mode chan-req ascending
channel allocator mode assignment ascending
channel allocator mode handover ascending
channel allocator mode vgcs-vbs ascending
rach tx integer 9
rach max transmission 7
rach max-delay 63
rach expiry-timeout 32
channel-description attach 1
channel-description bs-pa-mfrms 5
channel-description bs-ag-blks-res 1
no nch-position
no access-control-class-ramping
early-classmark-sending forbidden
early-classmark-sending-3g allowed
ipa unit-id 1800 0
oml ipa stream-id 255 line 0
neighbor-list mode automatic
codec-support fr hr efr amr
amr tch-f modes 0 2 5 7
amr tch-f threshold ms 13 25 37
amr tch-f hysteresis ms 4 4 4
amr tch-f threshold bts 13 25 37
amr tch-f hysteresis bts 4 4 4
amr tch-f start-mode auto
amr tch-h modes 0 2 3 5
amr tch-h threshold ms 16 24 32
amr tch-h hysteresis ms 4 4 4
amr tch-h threshold bts 16 24 32
amr tch-h hysteresis bts 4 4 4
amr tch-h start-mode auto
gprs mode none
bs-power-control
mode static
ms-power-control
mode dyn-bts
ctrl-interval 2
step-size inc 4 red 2
rxlev-thresh lower 32 upper 38
rxlev-thresh-comp lower 10 12 upper 19 20
rxqual-thresh lower 3 upper 0
rxqual-thresh-comp lower 5 7 upper 15 18
ci-thresh fr-efr disable
ci-thresh fr-efr lower 13 upper 17
ci-thresh-comp fr-efr lower 5 7 upper 15 18
ci-thresh hr disable
ci-thresh hr lower 16 upper 21
ci-thresh-comp hr lower 5 7 upper 15 18
ci-thresh amr-fr disable
ci-thresh amr-fr lower 7 upper 11
ci-thresh-comp amr-fr lower 5 7 upper 15 18
ci-thresh amr-hr disable
ci-thresh amr-hr lower 13 upper 17
ci-thresh-comp amr-hr lower 5 7 upper 15 18
ci-thresh sdcch disable
ci-thresh sdcch lower 12 upper 16
ci-thresh-comp sdcch lower 5 7 upper 15 18
ci-thresh gprs disable
ci-thresh gprs lower 18 upper 24
ci-thresh-comp gprs lower 5 7 upper 15 18
trx 0
rf_locked 0
arfcn 868
nominal power 23
max_power_red 0
rsl e1 tei 0
timeslot 0
phys_chan_config TCH/F
hopping enabled 0
timeslot 1
phys_chan_config SDCCH8
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config TCH/F
hopping enabled 0
timeslot 5
phys_chan_config TCH/F
hopping enabled 0
timeslot 6
phys_chan_config TCH/F
hopping enabled 0
timeslot 7
phys_chan_config TCH/F
hopping enabled 0
msc 0
codec-list fr1 hr1 fr2 fr3 hr3
allow-emergency deny
amr-config 12_2k allowed
amr-config 10_2k allowed
amr-config 7_95k allowed
amr-config 7_40k allowed
amr-config 6_70k allowed
amr-config 5_90k allowed
amr-config 5_15k allowed
amr-config 4_75k allowed
amr-payload octet-aligned
asp-protocol m3ua
lcls-mode disabled
lcls-codec-mismatch forbidden
bsc
mid-call-timeout 0
end
OsmoBSC(config-net-bts-trx-ts)# phys_chan_config tch/f_tch/h_sdcch8_pdch
OsmoBSC(config-net-bts-trx-ts)# show running-config
Current configuration:
!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging timestamp 0
logging print level 1
logging print file basename last
logging level rll notice
logging level mm notice
logging level rr notice
logging level rsl notice
logging level nm notice
logging level pag notice
logging level meas notice
logging level msc notice
logging level ho notice
logging level hodec notice
logging level ref notice
logging level ctrl notice
logging level filter notice
logging level pcu notice
logging level lcls notice
logging level chan notice
logging level ts notice
logging level as notice
logging level cbs notice
logging level lcs notice
logging level asci notice
logging level reset notice
logging level loop notice
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
stats interval 5
!
line vty
no login
!
e1_input
e1_line 0 driver ipa
e1_line 0 port 0
cs7 instance 0
point-code 0.23.3
network
network country code 901
mobile network code 70
encryption a5 1 3
neci 0
paging any use tch 0
mgw 0
bts 0
type osmo-bts
band DCS1800
cell_identity 0
location_area_code 0x0017
base_station_id_code 63
ms max power 15
cell reselection hysteresis 4
rxlev access min 0
radio-link-timeout 32
channel allocator mode chan-req ascending
channel allocator mode assignment ascending
channel allocator mode handover ascending
channel allocator mode vgcs-vbs ascending
rach tx integer 9
rach max transmission 7
rach max-delay 63
rach expiry-timeout 32
channel-description attach 1
channel-description bs-pa-mfrms 5
channel-description bs-ag-blks-res 1
no nch-position
no access-control-class-ramping
early-classmark-sending forbidden
early-classmark-sending-3g allowed
ipa unit-id 1800 0
oml ipa stream-id 255 line 0
neighbor-list mode automatic
codec-support fr hr efr amr
amr tch-f modes 0 2 5 7
amr tch-f threshold ms 13 25 37
amr tch-f hysteresis ms 4 4 4
amr tch-f threshold bts 13 25 37
amr tch-f hysteresis bts 4 4 4
amr tch-f start-mode auto
amr tch-h modes 0 2 3 5
amr tch-h threshold ms 16 24 32
amr tch-h hysteresis ms 4 4 4
amr tch-h threshold bts 16 24 32
amr tch-h hysteresis bts 4 4 4
amr tch-h start-mode auto
gprs mode none
bs-power-control
mode static
ms-power-control
mode dyn-bts
ctrl-interval 2
step-size inc 4 red 2
rxlev-thresh lower 32 upper 38
rxlev-thresh-comp lower 10 12 upper 19 20
rxqual-thresh lower 3 upper 0
rxqual-thresh-comp lower 5 7 upper 15 18
ci-thresh fr-efr disable
ci-thresh fr-efr lower 13 upper 17
ci-thresh-comp fr-efr lower 5 7 upper 15 18
ci-thresh hr disable
ci-thresh hr lower 16 upper 21
ci-thresh-comp hr lower 5 7 upper 15 18
ci-thresh amr-fr disable
ci-thresh amr-fr lower 7 upper 11
ci-thresh-comp amr-fr lower 5 7 upper 15 18
ci-thresh amr-hr disable
ci-thresh amr-hr lower 13 upper 17
ci-thresh-comp amr-hr lower 5 7 upper 15 18
ci-thresh sdcch disable
ci-thresh sdcch lower 12 upper 16
ci-thresh-comp sdcch lower 5 7 upper 15 18
ci-thresh gprs disable
ci-thresh gprs lower 18 upper 24
ci-thresh-comp gprs lower 5 7 upper 15 18
trx 0
rf_locked 0
arfcn 868
nominal power 23
max_power_red 0
rsl e1 tei 0
timeslot 0
phys_chan_config DYNAMIC/OSMOCOM
hopping enabled 0
timeslot 1
phys_chan_config SDCCH8
hopping enabled 0
timeslot 2
phys_chan_config TCH/F
hopping enabled 0
timeslot 3
phys_chan_config TCH/F
hopping enabled 0
timeslot 4
phys_chan_config TCH/F
hopping enabled 0
timeslot 5
phys_chan_config TCH/F
hopping enabled 0
timeslot 6
phys_chan_config TCH/F
hopping enabled 0
timeslot 7
phys_chan_config TCH/F
hopping enabled 0
msc 0
codec-list fr1 hr1 fr2 fr3 hr3
allow-emergency deny
amr-config 12_2k allowed
amr-config 10_2k allowed
amr-config 7_95k allowed
amr-config 7_40k allowed
amr-config 6_70k allowed
amr-config 5_90k allowed
amr-config 5_15k allowed
amr-config 4_75k allowed
amr-payload octet-aligned
asp-protocol m3ua
lcls-mode disabled
lcls-codec-mismatch forbidden
bsc
mid-call-timeout 0
end
[1;36m[1;33mDNM[0;m[1;36m [1;33mNOTICE[0;m[1;36m shutting down OML for BTS 0 (bsc_init.c:57)[0;m
signal 15 received
RESULTS:
pass: ./acch_overpower.vty
pass: ./bts_features.vty
pass: ./cbc.vty
pass: ./early_ia.vty
pass: ./gprs_params.vty
pass: ./handover_cfg.vty
pass: ./interf_meas.vty
pass: ./msc.vty
pass: ./neighbor_ident.vty
pass: ./nri_cfg.vty
pass: ./osmo-bsc.vty
pass: ./power_ctrl.vty
pass: ./si2quater_neighbor_list.vty
pass: ./smlc.vty
pass: ./timer.vty
pass: ./timeslot.vty
make[6]: Leaving directory '/build/tests'
osmotestvty.py -p /build -w /build -v
test_history (__main__.TestVTY.test_history) ... confpath /build, workdir /build
Running tests for specific VTY commands
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Opening /dev/null
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57796/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57796 50.0 0.0 27872 23100 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 57797 33.3 0.0 21474922148 50960 ? S 11:54 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build 57804 0.0 0.0 2576 876 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57806 0.0 0.0 3700 1872 ? S 11:54 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49730), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49730), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57796/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57796 19.3 0.0 27872 23100 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 57808 25.0 0.0 21474922148 51316 ? S 11:54 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build 57815 0.0 0.0 2576 928 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57817 0.0 0.0 3700 1860 ? S 11:54 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49740), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49740), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
Launch: ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg from /build
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57796/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57796 11.5 0.0 27872 23100 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 57819 25.0 0.0 21474922148 51232 ? S 11:54 0:00 ./src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build 57826 0.0 0.0 2576 896 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57828 0.0 0.0 3700 1852 ? S 11:54 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 0.627s
OK
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49748), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49748), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
osmotestconfig.py -p /build -w /build -v
Warning: doc/examples/osmo-bsc/siemens/osmo-bsc.bs11.cfg is not being tested
Warning: doc/examples/osmo-bsc/nokia/osmo-bsc.insite.cfg is not being tested
Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-4trx.cfg is not being tested
Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus01-4trx.cfg is not being tested
Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.rbs2308.cfg is not being tested
Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-1trx-1pdch-16kbps.cfg is not being tested
Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-8trx.cfg is not being tested
Warning: doc/examples/osmo-bsc/ericsson/osmo-bsc.dug20-rus02-1trx-1pdch-64kbps.cfg is not being tested
Verifying src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 60.0 0.0 27996 23160 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57831 33.3 0.0 21474922148 51280 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc.cfg
build 57838 0.0 0.0 2576 904 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57840 0.0 0.0 3700 1852 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49752), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49752), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc.cfgin22xyzl, test write_config
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc.cfgin22xyzl'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 5.5 0.0 28476 24088 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57842 25.0 0.0 21474922148 51064 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc.cfgin22xyzl
build 57849 0.0 0.0 2576 892 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57851 0.0 0.0 3700 1812 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49766), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49766), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc.cfgin22xyzl, test token_vty_command
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc.cfgin22xyzl'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ps xua | grep osmo
build 57830 2.9 0.0 28476 24088 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57853 50.0 0.0 21474922148 51628 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc.cfgin22xyzl
build 57860 0.0 0.0 2576 916 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57862 0.0 0.0 3700 1736 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49772), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 49772), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc-minimal.cfg, test verify_doc
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc-minimal.cfg'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 2.2 0.0 28476 24088 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57864 50.0 0.0 21474922148 50992 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc-minimal.cfg
build 57871 0.0 0.0 2576 944 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57873 0.0 0.0 3700 1892 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44306), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44306), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-minimal.cfgsnqf334j, test write_config
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc-minimal.cfgsnqf334j'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 1.9 0.0 28836 24352 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57875 25.0 0.0 21474922148 50968 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-minimal.cfgsnqf334j
build 57882 0.0 0.0 2576 912 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57884 0.0 0.0 3700 1900 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44320), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44320), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-minimal.cfgsnqf334j, test token_vty_command
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc-minimal.cfgsnqf334j'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 1.5 0.0 28836 24352 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57886 50.0 0.0 21474922148 51628 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-minimal.cfgsnqf334j
build 57893 0.0 0.0 2576 924 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57895 0.0 0.0 3700 1808 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44326), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44326), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc-4trx.cfg, test verify_doc
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc-4trx.cfg'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 1.3 0.0 28836 24352 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57897 33.3 0.0 21474922556 52044 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc-4trx.cfg
build 57904 0.0 0.0 2576 924 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57906 0.0 0.0 3700 1872 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44332), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44332), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-4trx.cfgtnop1yg9, test write_config
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc-4trx.cfgtnop1yg9'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 1.3 0.0 28960 24684 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57908 50.0 0.0 21474922556 52156 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-4trx.cfgtnop1yg9
build 57915 0.0 0.0 2576 932 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57917 0.0 0.0 3700 1804 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44348), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44348), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-4trx.cfgtnop1yg9, test token_vty_command
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc-4trx.cfgtnop1yg9'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 1.1 0.0 28960 24684 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57919 60.0 0.0 21474922556 52596 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc-4trx.cfgtnop1yg9
build 57926 0.0 0.0 2576 916 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57928 0.0 0.0 3700 1884 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44360), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44360), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg, test verify_doc
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 1.0 0.0 28960 24684 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57930 33.3 0.0 21474922148 51320 ? S 11:54 0:00 src/osmo-bsc/osmo-bsc -c /build/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg
build 57937 0.0 0.0 2576 912 ? S 11:54 0:00 /bin/sh -c ps xua | grep osmo
build 57939 0.0 0.0 3700 1816 ? S 11:54 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44364), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44364), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc_custom-sccp.cfgkgtomf0o, test write_config
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc_custom-sccp.cfgkgtomf0o'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57830 1.1 0.0 28560 24284 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57941 33.3 0.0 21474922148 51332 ? S 11:55 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc_custom-sccp.cfgkgtomf0o
build 57948 0.0 0.0 2576 952 ? S 11:55 0:00 /bin/sh -c ps xua | grep osmo
build 57950 0.0 0.0 3700 1832 ? S 11:55 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41958), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41958), raddr=('127.0.0.1', 4242)> (0 sockets open)
Verifying src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc_custom-sccp.cfgkgtomf0o, test token_vty_command
Launching: PWD=/build 'src/osmo-bsc/osmo-bsc' '-c' '/build/writtenconfig/osmo-bsc_custom-sccp.cfgkgtomf0o'
> ls -l /proc/57830/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:54 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:54 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:54 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:54 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ps xua | grep osmo
build 57830 1.0 0.0 28560 24284 ? S 11:54 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 57952 25.0 0.0 21474922148 51876 ? S 11:55 0:00 src/osmo-bsc/osmo-bsc -c /build/writtenconfig/osmo-bsc_custom-sccp.cfgkgtomf0o
build 57959 0.0 0.0 2576 920 ? S 11:55 0:00 /bin/sh -c ps xua | grep osmo
build 57961 0.0 0.0 3700 1816 ? S 11:55 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41970), raddr=('127.0.0.1', 4242)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41970), raddr=('127.0.0.1', 4242)> (0 sockets open)
./vty_test_runner.py -w /build -v
confpath /build/tests/.., workdir /build
Running tests for specific VTY commands
testConfigNetworkTree (__main__.TestVTYBSC.testConfigNetworkTree) ... Opening /dev/null
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57963/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:55 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:55 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:55 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:55 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57964 50.0 0.0 21474922148 51292 ? S 11:55 0:00 ./src/osmo-bsc/osmo-bsc -c /build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg
build 57971 0.0 0.0 2576 944 ? S 11:55 0:00 /bin/sh -c ps xua | grep osmo
build 57973 0.0 0.0 3700 1968 ? S 11:55 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41976), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41976), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
ok
testNetworkTimezone (__main__.TestVTYBSC.testNetworkTimezone) ... Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57963/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:55 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:55 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:55 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:55 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57975 25.0 0.0 21474922148 51360 ? S 11:55 0:00 ./src/osmo-bsc/osmo-bsc -c /build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg
build 57982 0.0 0.0 2576 876 ? S 11:55 0:00 /bin/sh -c ps xua | grep osmo
build 57984 0.0 0.0 3700 1868 ? S 11:55 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41992), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 41992), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
ok
testShowNetwork (__main__.TestVTYBSC.testShowNetwork) ... Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57963/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:55 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:55 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:55 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:55 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57986 33.3 0.0 21474922148 53016 ? S 11:55 0:00 ./src/osmo-bsc/osmo-bsc -c /build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg
build 57993 0.0 0.0 2576 904 ? S 11:55 0:00 /bin/sh -c ps xua | grep osmo
build 57995 0.0 0.0 3700 1868 ? S 11:55 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42000), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42000), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
ok
testTonsOfBTS (__main__.TestVTYBSC.testTonsOfBTS) ... Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57963/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:55 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:55 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:55 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:55 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 57997 25.0 0.0 21474922148 51356 ? S 11:55 0:00 ./src/osmo-bsc/osmo-bsc -c /build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg
build 58004 0.0 0.0 2576 936 ? S 11:55 0:00 /bin/sh -c ps xua | grep osmo
build 58006 0.0 0.0 3700 1896 ? S 11:55 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42006), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42006), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
ok
testVtyTree (__main__.TestVTYBSC.testVtyTree) ... Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
> ls -l /proc/57963/fd
total 0
lr-x------ 1 build build 64 Nov 29 11:55 0 -> pipe:[2462142155]
l-wx------ 1 build build 64 Nov 29 11:55 1 -> pipe:[2462142156]
l-wx------ 1 build build 64 Nov 29 11:55 2 -> pipe:[2462142157]
l-wx------ 1 build build 64 Nov 29 11:55 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4249 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4242 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3003 0.0.0.0:*
LISTEN 0 10 0.0.0.0:3002 0.0.0.0:*
> ps xua | grep osmo
build 58008 50.0 0.0 21474922148 51148 ? S 11:55 0:00 ./src/osmo-bsc/osmo-bsc -c /build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg
build 58015 0.0 0.0 2576 904 ? S 11:55 0:00 /bin/sh -c ps xua | grep osmo
build 58017 0.0 0.0 3700 1872 ? S 11:55 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42018), raddr=('127.0.0.1', 4242)> (1 sockets open)
Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42018), raddr=('127.0.0.1', 4242)> (0 sockets open)
Process returned code: 0
ok
----------------------------------------------------------------------
Ran 5 tests in 1.465s
OK
./ctrl_test_runner.py -w /build -v
testApplyConfigFile (__main__.TestCtrlBSC.testApplyConfigFile) ... ok
testBtsChannelLoad (__main__.TestCtrlBSC.testBtsChannelLoad) ... ok
testBtsCi (__main__.TestCtrlBSC.testBtsCi) ... ok
testBtsGenerateSystemInformation (__main__.TestCtrlBSC.testBtsGenerateSystemInformation) ... ok
testBtsLac (__main__.TestCtrlBSC.testBtsLac) ... ok
testBtsOmlConnectionState (__main__.TestCtrlBSC.testBtsOmlConnectionState)
Check OML state. It will not be connected ... ok
testCtrlErrs (__main__.TestCtrlBSC.testCtrlErrs) ... ok
testMcc (__main__.TestCtrlBSC.testMcc) ... ok
testMccMncApply (__main__.TestCtrlBSC.testMccMncApply) ... confpath /build/tests/.., workdir /build
Running tests for specific control commands
Opening /dev/null
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 apply-config-file wrong-file-name-nonexistent"
Got message: ERROR 1000 Value failed verification.
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Value failed verification.'}}
Sending "SET 1001 apply-config-file /build/tests/../tests/ctrl/osmo-bsc-apply-config-file-invalid.cfg"
Got message: ERROR 1001 ParseError=-22
Decoded replies: {1001: {'mtype': 'ERROR', 'id': 1001, 'error': 'ParseError=-22'}}
Sending "GET 1002 bts.1.location-area-code"
Got message: ERROR 1002 Error while resolving object
Decoded replies: {1002: {'mtype': 'ERROR', 'id': 1002, 'error': 'Error while resolving object'}}
Sending "SET 1003 apply-config-file /build/tests/../tests/ctrl/osmo-bsc-apply-config-file.cfg"
Got message: SET_REPLY 1003 apply-config-file OK
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'apply-config-file', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'apply-config-file', 'value': 'OK'}
Sending "GET 1004 bts.1.location-area-code"
Got message: GET_REPLY 1004 bts.1.location-area-code 1
Decoded replies: {1004: {'mtype': 'GET_REPLY', 'id': 1004, 'var': 'bts.1.location-area-code', 'value': '1'}}
Sending "SET 1005 apply-config-file /build/tests/../tests/ctrl/osmo-bsc-apply-config-file.cfg"
Got message: SET_REPLY 1005 apply-config-file OK
Decoded replies: {1005: {'mtype': 'SET_REPLY', 'id': 1005, 'var': 'apply-config-file', 'value': 'OK'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.channel-load 1"
Got message: ERROR 1000 Read Only attribute
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Read Only attribute'}}
Sending "GET 1001 bts.0.channel-load"
Got message: GET_REPLY 1001 bts.0.channel-load CCCH+SDCCH4,0,0 TCH/F,0,0 TCH/H,0,0 SDCCH8,0,0 DYNAMIC/IPACCESS,0,0 CCCH+SDCCH4+CBCH,0,0 SDCCH8+CBCH,0,0 DYNAMIC/OSMOCOM,0,0
Decoded replies: {1001: {'mtype': 'GET_REPLY', 'id': 1001, 'var': 'bts.0.channel-load', 'value': 'CCCH+SDCCH4,0,0 TCH/F,0,0 TCH/H,0,0 SDCCH8,0,0 DYNAMIC/IPACCESS,0,0 CCCH+SDCCH4+CBCH,0,0 SDCCH8+CBCH,0,0 DYNAMIC/OSMOCOM,0,0'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 bts.0.cell-identity"
Got message: GET_REPLY 1000 bts.0.cell-identity 6969
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.cell-identity', 'value': '6969'}}
Sending "SET 1001 bts.0.cell-identity 23"
Got message: SET_REPLY 1001 bts.0.cell-identity 23
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.cell-identity', 'value': '23'}}
Sending "GET 1002 bts.0.cell-identity"
Got message: GET_REPLY 1002 bts.0.cell-identity 23
Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.cell-identity', 'value': '23'}}
Sending "SET 1003 bts.0.cell-identity -1"
Got message: ERROR 1003 Input not within the range
Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Input not within the range'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 bts.0.send-new-system-informations"
Got message: ERROR 1000 Write Only attribute
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Write Only attribute'}}
Sending "SET 1001 bts.0.send-new-system-informations 1"
Got message: ERROR 1001 Failed to generate SI
Decoded replies: {1001: {'mtype': 'ERROR', 'id': 1001, 'error': 'Failed to generate SI'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 bts.0.location-area-code"
Got message: GET_REPLY 1000 bts.0.location-area-code 1
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.location-area-code', 'value': '1'}}
Sending "SET 1001 bts.0.location-area-code 23"
Got message: SET_REPLY 1001 bts.0.location-area-code 23
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.location-area-code', 'value': '23'}}
Sending "GET 1002 bts.0.location-area-code"
Got message: GET_REPLY 1002 bts.0.location-area-code 23
Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.location-area-code', 'value': '23'}}
Sending "SET 1003 bts.0.location-area-code -1"
Got message: ERROR 1003 Input not within the range
Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Input not within the range'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.oml-connection-state 1"
Got message: ERROR 1000 Read Only attribute
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Read Only attribute'}}
Sending "GET 1001 bts.0.oml-connection-state"
Got message: GET_REPLY 1001 bts.0.oml-connection-state disconnected
Decoded replies: {1001: {'mtype': 'GET_REPLY', 'id': 1001, 'var': 'bts.0.oml-connection-state', 'value': 'disconnected'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 invalid"
Got message: ERROR 1000 Command not found
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Command not found'}}
Sending "SET 1001 rf_locked 999"
Got message: ERROR 1001 Value failed verification.
Decoded replies: {1001: {'mtype': 'ERROR', 'id': 1001, 'error': 'Value failed verification.'}}
Sending "GET 1002 bts"
Got message: ERROR 1002 Error while parsing the index.
Decoded replies: {1002: {'mtype': 'ERROR', 'id': 1002, 'error': 'Error while parsing the index.'}}
Sending "GET 1003 bts.999"
Got message: ERROR 1003 Error while resolving object
Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Error while resolving object'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 mcc 23"
Got message: SET_REPLY 1000 mcc 023
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'mcc', 'value': '023'}}
Sending "GET 1001 mcc"
Got message: GET_REPLY 1001 mcc 023
Decoded replies: {1001: {'mtype': 'GET_REPLY', 'id': 1001, 'var': 'mcc', 'value': '023'}}
Sending "SET 1002 mcc 023"
Got message: SET_REPLY 1002 mcc 023
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'mcc', 'value': '023'}}
Sending "GET 1003 mcc"
Got message: GET_REPLY 1003 mcc 023
Decoded replies: {1003: {'mtype': 'GET_REPLY', 'id': 1003, 'var': 'mcc', 'value': '023'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 mcc-mnc-apply WRONG"
Got message: ERROR 1000 Value failed verification.
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Value failed verification.'}}
Sending "SET 1001 mcc-mnc-apply 1,"
Got message: ERROR 1001 Value failed verification.
Decoded replies: {1001: {'mtype': 'ERROR', 'id': 1001, 'error': 'Value failed verification.'}}
Sending "SET 1002 mcc-mnc-apply 200,3"
Got message: SET_REPLY 1002 mcc-mnc-apply Tried to drop the BTS
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'mcc-mnc-apply', 'value': 'Tried to drop the BTS'}}
Sending "SET 1003 mcc-mnc-apply 200,3"
Got message: ok
testMnc (__main__.TestCtrlBSC.testMnc) ... ok
testNeighborList (__main__.TestCtrlBSC.testNeighborList) ... ok
testRfLock (__main__.TestCtrlBSC.testRfLock) ... ok
testTimezone (__main__.TestCtrlBSC.testTimezone) ... SET_REPLY 1003 mcc-mnc-apply Nothing changed
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'mcc-mnc-apply', 'value': 'Nothing changed'}}
Sending "SET 1004 mcc-mnc-apply 200,4"
Got message: SET_REPLY 1004 mcc-mnc-apply Tried to drop the BTS
Decoded replies: {1004: {'mtype': 'SET_REPLY', 'id': 1004, 'var': 'mcc-mnc-apply', 'value': 'Tried to drop the BTS'}}
Sending "SET 1005 mcc-mnc-apply 201,4"
Got message: SET_REPLY 1005 mcc-mnc-apply Tried to drop the BTS
Decoded replies: {1005: {'mtype': 'SET_REPLY', 'id': 1005, 'var': 'mcc-mnc-apply', 'value': 'Tried to drop the BTS'}}
Sending "GET 1006 mnc"
Got message: GET_REPLY 1006 mnc 04
Decoded replies: {1006: {'mtype': 'GET_REPLY', 'id': 1006, 'var': 'mnc', 'value': '04'}}
Sending "GET 1007 mcc"
Got message: GET_REPLY 1007 mcc 201
Decoded replies: {1007: {'mtype': 'GET_REPLY', 'id': 1007, 'var': 'mcc', 'value': '201'}}
Sending "SET 1008 mcc-mnc-apply 202,03"
Got message: SET_REPLY 1008 mcc-mnc-apply Tried to drop the BTS
Decoded replies: {1008: {'mtype': 'SET_REPLY', 'id': 1008, 'var': 'mcc-mnc-apply', 'value': 'Tried to drop the BTS'}}
Sending "GET 1009 mnc"
Got message: GET_REPLY 1009 mnc 03
Decoded replies: {1009: {'mtype': 'GET_REPLY', 'id': 1009, 'var': 'mnc', 'value': '03'}}
Sending "GET 1010 mcc"
Got message: GET_REPLY 1010 mcc 202
Decoded replies: {1010: {'mtype': 'GET_REPLY', 'id': 1010, 'var': 'mcc', 'value': '202'}}
Sending "SET 1011 mcc-mnc-apply 2,003"
Got message: SET_REPLY 1011 mcc-mnc-apply Tried to drop the BTS
Decoded replies: {1011: {'mtype': 'SET_REPLY', 'id': 1011, 'var': 'mcc-mnc-apply', 'value': 'Tried to drop the BTS'}}
Sending "GET 1012 mnc"
Got message: GET_REPLY 1012 mnc 003
Decoded replies: {1012: {'mtype': 'GET_REPLY', 'id': 1012, 'var': 'mnc', 'value': '003'}}
Sending "GET 1013 mcc"
Got message: GET_REPLY 1013 mcc 002
Decoded replies: {1013: {'mtype': 'GET_REPLY', 'id': 1013, 'var': 'mcc', 'value': '002'}}
Sending "SET 1014 mcc-mnc-apply 2,003"
Got message: SET_REPLY 1014 mcc-mnc-apply Nothing changed
Decoded replies: {1014: {'mtype': 'SET_REPLY', 'id': 1014, 'var': 'mcc-mnc-apply', 'value': 'Nothing changed'}}
Sending "GET 1015 mnc"
Got message: GET_REPLY 1015 mnc 003
Decoded replies: {1015: {'mtype': 'GET_REPLY', 'id': 1015, 'var': 'mnc', 'value': '003'}}
Sending "GET 1016 mcc"
Got message: GET_REPLY 1016 mcc 002
Decoded replies: {1016: {'mtype': 'GET_REPLY', 'id': 1016, 'var': 'mcc', 'value': '002'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 mnc 9"
Got message: SET_REPLY 1000 mnc 09
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'mnc', 'value': '09'}}
Sending "GET 1001 mnc"
Got message: GET_REPLY 1001 mnc 09
Decoded replies: {1001: {'mtype': 'GET_REPLY', 'id': 1001, 'var': 'mnc', 'value': '09'}}
Sending "SET 1002 mnc 09"
Got message: SET_REPLY 1002 mnc 09
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'mnc', 'value': '09'}}
Sending "GET 1003 mnc"
Got message: GET_REPLY 1003 mnc 09
Decoded replies: {1003: {'mtype': 'GET_REPLY', 'id': 1003, 'var': 'mnc', 'value': '09'}}
Sending "SET 1004 mnc 009"
Got message: SET_REPLY 1004 mnc 009
Decoded replies: {1004: {'mtype': 'SET_REPLY', 'id': 1004, 'var': 'mnc', 'value': '009'}}
Sending "GET 1005 mnc"
Got message: GET_REPLY 1005 mnc 009
Decoded replies: {1005: {'mtype': 'GET_REPLY', 'id': 1005, 'var': 'mnc', 'value': '009'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-list.mode manual"
Got message: SET_REPLY 1000 bts.0.neighbor-list.mode OK
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-list.mode', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-list.mode', 'value': 'OK'}
Sending "SET 1001 bts.0.neighbor-list.add 123"
Got message: SET_REPLY 1001 bts.0.neighbor-list.add OK
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-list.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-list.add', 'value': 'OK'}
Sending "SET 1002 bts.0.neighbor-list.del 123"
Got message: SET_REPLY 1002 bts.0.neighbor-list.del OK
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-list.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-list.del', 'value': 'OK'}
Sending "SET 1003 bts.0.neighbor-list.mode automatic"
Got message: SET_REPLY 1003 bts.0.neighbor-list.mode OK
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-list.mode', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-list.mode', 'value': 'OK'}
Sending "SET 1004 bts.0.neighbor-list.add 123"
Got message: ERROR 1004 Neighbor list not in manual mode
Decoded replies: {1004: {'mtype': 'ERROR', 'id': 1004, 'error': 'Neighbor list not in manual mode'}}
respose: {'mtype': 'ERROR', 'id': 1004, 'error': 'Neighbor list not in manual mode'}
Sending "SET 1005 bts.0.neighbor-list.mode qwertzuiop"
Got message: ERROR 1005 Invalid mode
Decoded replies: {1005: {'mtype': 'ERROR', 'id': 1005, 'error': 'Invalid mode'}}
respose: {'mtype': 'ERROR', 'id': 1005, 'error': 'Invalid mode'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 bts.0.rf_state"
Got message: GET_REPLY 1000 bts.0.rf_state inoperational,locked,on
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.rf_state', 'value': 'inoperational,locked,on'}}
Sending "SET 1001 rf_locked 1"
Got message: SET_REPLY 1001 rf_locked 1
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'rf_locked', 'value': '1'}}
Sending "GET 1002 bts.0.rf_state"
Got message: GET_REPLY 1002 bts.0.rf_state inoperational,locked,off
Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.rf_state', 'value': 'inoperational,locked,off'}}
Sending "GET 1003 rf_locked"
Got message: GET_REPLY 1003 rf_locked state=off,policy=off
Decoded replies: {1003: {'mtype': 'GET_REPLY', 'id': 1003, 'var': 'rf_locked', 'value': 'state=off,policy=off'}}
Sending "SET 1004 rf_locked 0"
Got message: SET_REPLY 1004 rf_locked 0
Decoded replies: {1004: {'mtype': 'SET_REPLY', 'id': 1004, 'var': 'rf_locked', 'value': '0'}}
Sending "GET 1005 bts.0.rf_state"
Got message: GET_REPLY 1005 bts.0.rf_state inoperational,locked,on
Decoded replies: {1005: {'mtype': 'GET_REPLY', 'id': 1005, 'var': 'bts.0.rf_state', 'value': 'inoperational,locked,on'}}
Sending "GET 1006 rf_locked"
Got message: GET_REPLY 1006 rf_locked state=off,policy=on
Decoded replies: {1006: {'mtype': 'GET_REPLY', 'id': 1006, 'var': 'rf_locked', 'value': 'state=off,policy=on'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 timezone"
Got message: GET_REPLY 1000 timezone off
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'timezone', 'value': 'off'}}
Sending "SET 1001 timezone -2,15,2"
Got message: SET_REPLY 1001 timezone -2,15,2
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'timezone', 'value': '-2,15,2'}}
Sending "GET 1002 timezone"
Got message: GET_REPLY 1002 timezone -2,15,2
Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'timezone', 'value': '-2,15,2'}}
Sending "SET 1003 timezone -2,15,2,5,6,7"
Got message: SET_REPLY 1003 timezone -2,15,2
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'timezone', 'value': '-2,15,2'}}
Sending "SET 1004 timezone -2,15"
Got message: ERROR 1004 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2
Decoded replies: ok
testTrxArfcn (__main__.TestCtrlBSC.testTrxArfcn) ... ok
testTrxPowerRed (__main__.TestCtrlBSC.testTrxPowerRed) ... ok
testCtrlNeighborResolutionLocalBtsNr (__main__.TestCtrlBSCNeighbor.testCtrlNeighborResolutionLocalBtsNr) ... ok
testCtrlNeighborResolutionLocalWithoutArfcnBsic (__main__.TestCtrlBSCNeighbor.testCtrlNeighborResolutionLocalWithoutArfcnBsic) ... ok
testCtrlNeighborResolutionRemote (__main__.TestCtrlBSCNeighbor.testCtrlNeighborResolutionRemote) ... ok
testCtrlNeighborResolutionWrongSyntax (__main__.TestCtrlBSCNeighbor.testCtrlNeighborResolutionWrongSyntax) ... ok
testCtrlAddDelBTS (__main__.TestCtrlBSCNeighborCell.testCtrlAddDelBTS) ... ok
testCtrlAddDelCGI (__main__.TestCtrlBSCNeighborCell.testCtrlAddDelCGI) ... ok
testCtrlAddDelCGIPS (__main__.TestCtrlBSCNeighborCell.testCtrlAddDelCGIPS) ... {1004: {'mtype': 'ERROR', 'id': 1004, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}}
Sending "SET 1005 timezone -2"
Got message: ERROR 1005 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2
Decoded replies: {1005: {'mtype': 'ERROR', 'id': 1005, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}}
Sending "SET 1006 timezone 1"
Got message: ERROR 1006 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2
Decoded replies: {1006: {'mtype': 'ERROR', 'id': 1006, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}}
Sending "SET 1007 timezone off"
Got message: SET_REPLY 1007 timezone off
Decoded replies: {1007: {'mtype': 'SET_REPLY', 'id': 1007, 'var': 'timezone', 'value': 'off'}}
Sending "GET 1008 timezone"
Got message: GET_REPLY 1008 timezone off
Decoded replies: {1008: {'mtype': 'GET_REPLY', 'id': 1008, 'var': 'timezone', 'value': 'off'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 bts.0.trx.0.arfcn"
Got message: GET_REPLY 1000 bts.0.trx.0.arfcn 871
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.trx.0.arfcn', 'value': '871'}}
Sending "SET 1001 bts.0.trx.0.arfcn 873"
Got message: SET_REPLY 1001 bts.0.trx.0.arfcn 873
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.trx.0.arfcn', 'value': '873'}}
Sending "GET 1002 bts.0.trx.0.arfcn"
Got message: GET_REPLY 1002 bts.0.trx.0.arfcn 873
Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.trx.0.arfcn', 'value': '873'}}
Sending "SET 1003 bts.0.trx.0.arfcn 2000"
Got message: ERROR 1003 Input not within the range
Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Input not within the range'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 bts.0.trx.0.max-power-reduction"
Got message: GET_REPLY 1000 bts.0.trx.0.max-power-reduction 20
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '20'}}
Sending "SET 1001 bts.0.trx.0.max-power-reduction 22"
Got message: SET_REPLY 1001 bts.0.trx.0.max-power-reduction 22
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '22'}}
Sending "GET 1002 bts.0.trx.0.max-power-reduction"
Got message: GET_REPLY 1002 bts.0.trx.0.max-power-reduction 22
Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '22'}}
Sending "SET 1003 bts.0.trx.0.max-power-reduction 1"
Got message: ERROR 1003 Value must be even
Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Value must be even'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4248
Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.123.871.63"
Got message: GET_REPLY 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.123.871.63 001-01-1-5-6969
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'neighbor_resolve_cgi_ps_from_lac_ci.1.123.871.63', 'value': '001-01-1-5-6969'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4248
Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.880.55"
Got message: GET_REPLY 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.880.55 001-01-1-6-123
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'neighbor_resolve_cgi_ps_from_lac_ci.1.6969.880.55', 'value': '001-01-1-6-123'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4248
Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.23.32"
Got message: GET_REPLY 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.23.32 023-42-423-2-5
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'neighbor_resolve_cgi_ps_from_lac_ci.1.6969.23.32', 'value': '023-42-423-2-5'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4248
Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci"
Got message: ERROR 1000 The format is <src_lac>,<src_cell_id>,<dst_arfcn>,<dst_bsic>
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'The format is <src_lac>,<src_cell_id>,<dst_arfcn>,<dst_bsic>'}}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-bts.add 1"
Got message: SET_REPLY 1000 bts.0.neighbor-bts.add OK
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-bts.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-bts.add', 'value': 'OK'}
Sending "SET 1001 bts.0.neighbor-bts.del 1"
Got message: SET_REPLY 1001 bts.0.neighbor-bts.del OK
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-bts.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-bts.del', 'value': 'OK'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-cgi.add 001-01-100-200"
Got message: SET_REPLY 1000 bts.0.neighbor-cgi.add OK
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'}
Sending "SET 1001 bts.0.neighbor-cgi.del 001-01-100-200"
Got message: SET_REPLY 1001 bts.0.neighbor-cgi.del OK
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'}
Sending "SET 1002 bts.0.neighbor-cgi.add 001-01-100-200-123-4"
Got message: SET_REPLY 1002 bts.0.neighbor-cgi.add OK
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'}
Sending "SET 1003 bts.0.neighbor-cgi.del 001-01-100-200-123-4"
Got message: SET_REPLY 1003 bts.0.neighbor-cgi.del OK
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-cgi-ps.add 001-01-100-33-200"
Got message: SET_REPLY 1000 bts.0.neighbor-cgi-ps.add OK
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'}
Sending "SET 1001 bts.0.neighbor-cgi-ps.del 001-01-100-33-200"
Got message: SET_REPLY 1001 bts.0.neighbor-cgi-ps.del OK
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'}}
ok
testCtrlAddDelLAC (__main__.TestCtrlBSCNeighborCell.testCtrlAddDelLAC) ... ok
testCtrlAddDelLACCI (__main__.TestCtrlBSCNeighborCell.testCtrlAddDelLACCI) ... ok
testCtrlClearNeighbors (__main__.TestCtrlBSCNeighborCell.testCtrlClearNeighbors) ... ok
testCtrlErrs (__main__.TestCtrlBSCNeighborCell.testCtrlErrs) ... ok
testCtrlListBTS (__main__.TestCtrlBSCNeighborCell.testCtrlListBTS) ... ok
----------------------------------------------------------------------
Ran 27 tests in 10.333s
OK
respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'}
Sending "SET 1002 bts.0.neighbor-cgi-ps.add 001-01-100-33-200-123-any"
Got message: SET_REPLY 1002 bts.0.neighbor-cgi-ps.add OK
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'}
Sending "SET 1003 bts.0.neighbor-cgi-ps.del 001-01-100-33-200-123-any"
Got message: SET_REPLY 1003 bts.0.neighbor-cgi-ps.del OK
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-lac.add 100"
Got message: SET_REPLY 1000 bts.0.neighbor-lac.add OK
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'}
Sending "SET 1001 bts.0.neighbor-lac.del 100"
Got message: SET_REPLY 1001 bts.0.neighbor-lac.del OK
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'}
Sending "SET 1002 bts.0.neighbor-lac.add 100-123-4"
Got message: SET_REPLY 1002 bts.0.neighbor-lac.add OK
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'}
Sending "SET 1003 bts.0.neighbor-lac.del 100-123-4"
Got message: SET_REPLY 1003 bts.0.neighbor-lac.del OK
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-lac-ci.add 100-200"
Got message: SET_REPLY 1000 bts.0.neighbor-lac-ci.add OK
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'}
Sending "SET 1001 bts.0.neighbor-lac-ci.del 100-200"
Got message: SET_REPLY 1001 bts.0.neighbor-lac-ci.del OK
Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'}
Sending "SET 1002 bts.0.neighbor-lac-ci.add 100-200-123-any"
Got message: SET_REPLY 1002 bts.0.neighbor-lac-ci.add OK
Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'}
Sending "SET 1003 bts.0.neighbor-lac-ci.del 100-200-123-any"
Got message: SET_REPLY 1003 bts.0.neighbor-lac-ci.del OK
Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-clear ignored"
Got message: SET_REPLY 1000 bts.0.neighbor-clear OK
Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-clear', 'value': 'OK'}}
respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-clear', 'value': 'OK'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "SET 1000 bts.0.neighbor-lac.add 100-123"
Got message: ERROR 1000 Value failed verification.
Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Value failed verification.'}}
respose: {'mtype': 'ERROR', 'id': 1000, 'error': 'Value failed verification.'}
Sending "SET 1001 bts.0.neighbor-cgi-ps.del 001-01-100-200-123-1"
Got message: ERROR 1001 Value failed verification.
Decoded replies: {1001: {'mtype': 'ERROR', 'id': 1001, 'error': 'Value failed verification.'}}
respose: {'mtype': 'ERROR', 'id': 1001, 'error': 'Value failed verification.'}
Sending "SET 1002 bts.0.neighbor-cgi-ps.del 001-01-100-33-200-123-1-2"
Got message: ERROR 1002 Value failed verification.
Decoded replies: {1002: {'mtype': 'ERROR', 'id': 1002, 'error': 'Value failed verification.'}}
respose: {'mtype': 'ERROR', 'id': 1002, 'error': 'Value failed verification.'}
Sending "SET 1003 bts.0.neighbor-cgi.add 100001-1123401-100-200"
Got message: ERROR 1003 Value failed verification.
Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Value failed verification.'}}
respose: {'mtype': 'ERROR', 'id': 1003, 'error': 'Value failed verification.'}
Sending "SET 1004 bts.0.neighbor-lac-ci.add 0G1-Z1-1U0-a3-2p0"
Got message: ERROR 1004 Value failed verification.
Decoded replies: {1004: {'mtype': 'ERROR', 'id': 1004, 'error': 'Value failed verification.'}}
respose: {'mtype': 'ERROR', 'id': 1004, 'error': 'Value failed verification.'}
Sending "SET 1005 bts.0.neighbor-cgi-ps.del 001-01-100-33-200-123-any"
Got message: ERROR 1005 Failed to delete neighbor
Decoded replies: {1005: {'mtype': 'ERROR', 'id': 1005, 'error': 'Failed to delete neighbor'}}
respose: {'mtype': 'ERROR', 'id': 1005, 'error': 'Failed to delete neighbor'}
Process returned code: 0
Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg'
Connecting to host 127.0.0.1:4249
Sending "GET 1000 bts.0.neighbor-bts.list"
Got message: GET_REPLY 1000 bts.0.neighbor-bts.list 1
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-bts.list', 'value': '1'}}
Sending "GET 1001 bts.2.neighbor-bts.list"
Got message: GET_REPLY 1001 bts.2.neighbor-bts.list
Decoded replies: {1001: {'mtype': 'GET_REPLY', 'id': 1001, 'var': 'bts.2.neighbor-bts.list', 'value': None}}
Sending "GET 1002 bts.1.neighbor-bts.list"
Got message: GET_REPLY 1002 bts.1.neighbor-bts.list 0,2
Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.1.neighbor-bts.list', 'value': '0,2'}}
Process returned code: 0
make[5]: Leaving directory '/build/tests'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
Making check in doc
make[2]: Entering directory '/build/doc'
Making check in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/doc/examples'
Making check in manuals
make[3]: Entering directory '/build/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check; \
fi
make[4]: Entering directory '/build/doc/manuals'
if ! [ -f osmobsc-usermanual.adoc ]; then \
ln -s osmobsc-usermanual.adoc osmobsc-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmobsc-usermanual.adoc > osmobsc-usermanual.check 2>&1
touch osmobsc-usermanual.check
if ! [ -f osmobsc-cbsp.adoc ]; then \
ln -s osmobsc-cbsp.adoc osmobsc-cbsp.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmobsc-cbsp.adoc > osmobsc-cbsp.check 2>&1
touch osmobsc-cbsp.check
if ! [ -f osmux-reference.adoc ]; then \
ln -s osmux-reference.adoc osmux-reference.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmux-reference.adoc > osmux-reference.check 2>&1
touch osmux-reference.check
if ! [ -f aoip-mgw-options.adoc ]; then \
ln -s aoip-mgw-options.adoc aoip-mgw-options.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' aoip-mgw-options.adoc > aoip-mgw-options.check 2>&1
touch aoip-mgw-options.check
make[4]: Leaving directory '/build/doc/manuals'
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making check in contrib
make[2]: Entering directory '/build/contrib'
Making check in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
make[2]: Entering directory '/build'
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ DISTCHECK_CONFIGURE_FLAGS='
--enable-external-tests
--enable-meas-pcap2db
--enable-meas-udp2db
--enable-meas-vis
--enable-werror
--enable-manuals'
+ make -j 12 distcheck
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-bsc-1.12.1.31-83793"; then find "osmo-bsc-1.12.1.31-83793" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bsc-1.12.1.31-83793" || { sleep 5 && rm -rf "osmo-bsc-1.12.1.31-83793"; }; else :; fi
test -d "osmo-bsc-1.12.1.31-83793" || mkdir "osmo-bsc-1.12.1.31-83793"
(cd include && make top_distdir=../osmo-bsc-1.12.1.31-83793 distdir=../osmo-bsc-1.12.1.31-83793/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/include'
make distdir-am
make[4]: Entering directory '/build/include'
(cd osmocom && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/include/osmocom \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/include/osmocom'
make distdir-am
make[6]: Entering directory '/build/include/osmocom'
(cd bsc && make top_distdir=../../../osmo-bsc-1.12.1.31-83793 distdir=../../../osmo-bsc-1.12.1.31-83793/include/osmocom/bsc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/include/osmocom/bsc'
make distdir-am
make[8]: Entering directory '/build/include/osmocom/bsc'
make[8]: Leaving directory '/build/include/osmocom/bsc'
make[7]: Leaving directory '/build/include/osmocom/bsc'
make[6]: Leaving directory '/build/include/osmocom'
make[5]: Leaving directory '/build/include/osmocom'
make[4]: Leaving directory '/build/include'
make[3]: Leaving directory '/build/include'
(cd src && make top_distdir=../osmo-bsc-1.12.1.31-83793 distdir=../osmo-bsc-1.12.1.31-83793/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make distdir-am
make[4]: Entering directory '/build/src'
(cd osmo-bsc && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/src/osmo-bsc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/osmo-bsc'
make distdir-am
make[6]: Entering directory '/build/src/osmo-bsc'
make[6]: Leaving directory '/build/src/osmo-bsc'
make[5]: Leaving directory '/build/src/osmo-bsc'
(cd utils && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/src/utils \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/utils'
make distdir-am
make[6]: Entering directory '/build/src/utils'
make[6]: Leaving directory '/build/src/utils'
make[5]: Leaving directory '/build/src/utils'
(cd ipaccess && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/src/ipaccess \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/ipaccess'
make distdir-am
make[6]: Entering directory '/build/src/ipaccess'
make[6]: Leaving directory '/build/src/ipaccess'
make[5]: Leaving directory '/build/src/ipaccess'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
(cd tests && make top_distdir=../osmo-bsc-1.12.1.31-83793 distdir=../osmo-bsc-1.12.1.31-83793/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make distdir-am
make[4]: Entering directory '/build/tests'
(cd abis && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/abis \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/abis'
make distdir-am
make[6]: Entering directory '/build/tests/abis'
make[6]: Leaving directory '/build/tests/abis'
make[5]: Leaving directory '/build/tests/abis'
(cd acc && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/acc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/acc'
make distdir-am
make[6]: Entering directory '/build/tests/acc'
make[6]: Leaving directory '/build/tests/acc'
make[5]: Leaving directory '/build/tests/acc'
(cd bsc && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/bsc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/bsc'
make distdir-am
make[6]: Entering directory '/build/tests/bsc'
make[6]: Leaving directory '/build/tests/bsc'
make[5]: Leaving directory '/build/tests/bsc'
(cd codec_pref && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/codec_pref \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/codec_pref'
make distdir-am
make[6]: Entering directory '/build/tests/codec_pref'
make[6]: Leaving directory '/build/tests/codec_pref'
make[5]: Leaving directory '/build/tests/codec_pref'
(cd gsm0408 && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/gsm0408 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/gsm0408'
make distdir-am
make[6]: Entering directory '/build/tests/gsm0408'
make[6]: Leaving directory '/build/tests/gsm0408'
make[5]: Leaving directory '/build/tests/gsm0408'
(cd handover && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/handover \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/handover'
make distdir-am
make[6]: Entering directory '/build/tests/handover'
make[6]: Leaving directory '/build/tests/handover'
make[5]: Leaving directory '/build/tests/handover'
(cd nanobts_omlattr && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/nanobts_omlattr \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/nanobts_omlattr'
make distdir-am
make[6]: Entering directory '/build/tests/nanobts_omlattr'
make[6]: Leaving directory '/build/tests/nanobts_omlattr'
make[5]: Leaving directory '/build/tests/nanobts_omlattr'
(cd paging && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/paging \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/paging'
make distdir-am
make[6]: Entering directory '/build/tests/paging'
make[6]: Leaving directory '/build/tests/paging'
make[5]: Leaving directory '/build/tests/paging'
(cd subscr && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/tests/subscr \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/subscr'
make distdir-am
make[6]: Entering directory '/build/tests/subscr'
make[6]: Leaving directory '/build/tests/subscr'
make[5]: Leaving directory '/build/tests/subscr'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
(cd doc && make top_distdir=../osmo-bsc-1.12.1.31-83793 distdir=../osmo-bsc-1.12.1.31-83793/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make distdir-am
make[4]: Entering directory '/build/doc'
(cd examples && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make distdir-am
make[6]: Entering directory '/build/doc/examples'
make \
top_distdir="../../osmo-bsc-1.12.1.31-83793" distdir="../../osmo-bsc-1.12.1.31-83793/doc/examples" \
dist-hook
make[7]: Entering directory '/build/doc/examples'
for f in $(find . -name '*.cfg*' -o -name '*.confmerge*' | sed -e 's,^.,,'); do \
j="../../osmo-bsc-1.12.1.31-83793/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ./$f $j; \
done
make[7]: Leaving directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
(cd manuals && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/manuals'
make distdir-am
make[6]: Entering directory '/build/doc/manuals'
make[6]: Leaving directory '/build/doc/manuals'
make[5]: Leaving directory '/build/doc/manuals'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
(cd contrib && make top_distdir=../osmo-bsc-1.12.1.31-83793 distdir=../osmo-bsc-1.12.1.31-83793/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/contrib'
make distdir-am
make[4]: Entering directory '/build/contrib'
(cd systemd && make top_distdir=../../osmo-bsc-1.12.1.31-83793 distdir=../../osmo-bsc-1.12.1.31-83793/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/contrib/systemd'
make distdir-am
make[6]: Entering directory '/build/contrib/systemd'
make[6]: Leaving directory '/build/contrib/systemd'
make[5]: Leaving directory '/build/contrib/systemd'
make[4]: Leaving directory '/build/contrib'
make[3]: Leaving directory '/build/contrib'
make \
top_distdir="osmo-bsc-1.12.1.31-83793" distdir="osmo-bsc-1.12.1.31-83793" \
dist-hook
make[3]: Entering directory '/build'
echo 1.12.1.31-83793 > osmo-bsc-1.12.1.31-83793/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-bsc-1.12.1.31-83793" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-bsc-1.12.1.31-83793"
make[2]: Leaving directory '/build'
tardir=osmo-bsc-1.12.1.31-83793 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-bsc-1.12.1.31-83793.tar.bz2
tardir=osmo-bsc-1.12.1.31-83793 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-bsc-1.12.1.31-83793.tar.gz
make[1]: Leaving directory '/build'
if test -d "osmo-bsc-1.12.1.31-83793"; then find "osmo-bsc-1.12.1.31-83793" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bsc-1.12.1.31-83793" || { sleep 5 && rm -rf "osmo-bsc-1.12.1.31-83793"; }; else :; fi
case 'osmo-bsc-1.12.1.31-83793.tar.gz osmo-bsc-1.12.1.31-83793.tar.bz2' in \
*.tar.gz*) \
eval GZIP= gzip --best -dc osmo-bsc-1.12.1.31-83793.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
bzip2 -dc osmo-bsc-1.12.1.31-83793.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
lzip -dc osmo-bsc-1.12.1.31-83793.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
xz -dc osmo-bsc-1.12.1.31-83793.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
uncompress -c osmo-bsc-1.12.1.31-83793.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
eval GZIP= gzip --best -dc osmo-bsc-1.12.1.31-83793.shar.gz | unshar ;;\
*.zip*) \
unzip osmo-bsc-1.12.1.31-83793.zip ;;\
*.tar.zst*) \
zstd -dc osmo-bsc-1.12.1.31-83793.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-bsc-1.12.1.31-83793
chmod u+w osmo-bsc-1.12.1.31-83793
mkdir osmo-bsc-1.12.1.31-83793/_build osmo-bsc-1.12.1.31-83793/_build/sub osmo-bsc-1.12.1.31-83793/_inst
chmod a-w osmo-bsc-1.12.1.31-83793
test -d osmo-bsc-1.12.1.31-83793/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-bsc-1.12.1.31-83793/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
&& am__cwd=`pwd` \
&& CDPATH="${ZSH_VERSION+.}:" && cd osmo-bsc-1.12.1.31-83793/_build/sub \
&& ../../configure \
--with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmoabis >= 1.6.0... yes
checking for libosmo-netif >= 1.5.0... yes
checking for libosmo-sigtran >= 1.9.0... yes
checking for libosmo-mgcp-client >= 1.13.0... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking whether to enable VTY/CTRL tests... no
CFLAGS=" -std=gnu11"
CPPFLAGS=""
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/bsc/Makefile
config.status: creating src/Makefile
config.status: creating src/osmo-bsc/Makefile
config.status: creating src/ipaccess/Makefile
config.status: creating src/utils/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating tests/abis/Makefile
config.status: creating tests/acc/Makefile
config.status: creating tests/bsc/Makefile
config.status: creating tests/codec_pref/Makefile
config.status: creating tests/gsm0408/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/nanobts_omlattr/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/subscr/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating bscconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
enable-external-tests
/bin/bash: line 1: enable-external-tests: command not found
make: [Makefile:675: distcheck] Error 127 (ignored)
enable-meas-pcap2db
/bin/bash: line 1: enable-meas-pcap2db: command not found
make: [Makefile:675: distcheck] Error 127 (ignored)
enable-meas-udp2db
/bin/bash: line 1: enable-meas-udp2db: command not found
enable-meas-vis
make: [Makefile:675: distcheck] Error 127 (ignored)
/bin/bash: line 1: enable-meas-vis: command not found
enable-werror
make: [Makefile:675: distcheck] Error 127 (ignored)
/bin/bash: line 1: enable-werror: command not found
make: [Makefile:675: distcheck] Error 127 (ignored)
enable-manuals \
--srcdir=../.. --prefix="$dc_install_base" \
&& make \
&& make dvi \
&& make check \
&& make install \
&& make installcheck \
&& make uninstall \
&& make distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$dc_destdir") \
&& make DESTDIR="$dc_destdir" install \
&& make DESTDIR="$dc_destdir" uninstall \
&& make DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
} || { rm -rf "$dc_destdir"; exit 1; }) \
&& rm -rf "$dc_destdir" \
&& make dist \
&& rm -rf osmo-bsc-1.12.1.31-83793.tar.gz osmo-bsc-1.12.1.31-83793.tar.bz2 \
&& make distcleancheck \
&& cd "$am__cwd" \
|| exit 1
/bin/bash: line 2: enable-manuals: command not found
make: [Makefile:675: distcheck] Error 1 (ignored)
if test -d "osmo-bsc-1.12.1.31-83793"; then find "osmo-bsc-1.12.1.31-83793" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bsc-1.12.1.31-83793" || { sleep 5 && rm -rf "osmo-bsc-1.12.1.31-83793"; }; else :; fi
==========================================================
osmo-bsc-1.12.1.31-83793 archives ready for distribution:
osmo-bsc-1.12.1.31-83793.tar.gz
osmo-bsc-1.12.1.31-83793.tar.bz2
==========================================================
+ '[' 1 = 1 ']'
+ '[' 1 = 1 ']'
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-vty-reference.pdf
* osmobsc-usermanual.pdf: 1.2M
* osmobsc-cbsp.pdf: 192K
* osmux-reference.pdf: 172K (shrunk from 188K)
* aoip-mgw-options.pdf: 112K (shrunk from 140K)
* osmobsc-vty-reference.pdf: 632K
[ -n "osmo-bsc" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-bsc/master"
cp osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-vty-reference.pdf "_publish_tmpdir/osmo-bsc/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-bsc" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-bsc/
osmo-bsc/master/
osmo-bsc/master/aoip-mgw-options.pdf
osmo-bsc/master/osmobsc-cbsp.pdf
osmo-bsc/master/osmobsc-usermanual.pdf
osmo-bsc/master/osmobsc-vty-reference.pdf
osmo-bsc/master/osmux-reference.pdf
sent 463,928 bytes received 15,609 bytes 319,691.33 bytes/sec
total size is 2,307,825 speedup is 4.81
rm -rf "_publish_tmpdir"
make: Leaving directory '/build/doc/manuals'
+ make -j 12 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmocom
make[2]: Entering directory '/build/include/osmocom'
Making maintainer-clean in bsc
make[3]: Entering directory '/build/include/osmocom/bsc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[3]: Leaving directory '/build/include/osmocom/bsc'
make[3]: Entering directory '/build/include/osmocom'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[3]: Leaving directory '/build/include/osmocom'
rm -f Makefile
make[2]: Leaving directory '/build/include/osmocom'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
Making maintainer-clean in osmo-bsc
make[2]: Entering directory '/build/src/osmo-bsc'
rm -rf .libs _libs
test -z "libbsc.la" || rm -f libbsc.la
rm -f *.o
rm -f *.lo
rm -f osmo-bsc
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./so_locations
rm -f ./.deps/a_reset.Plo
rm -f ./.deps/abis_nm.Plo
rm -f ./.deps/abis_nm_vty.Plo
rm -f ./.deps/abis_om2000.Plo
rm -f ./.deps/abis_om2000_vty.Plo
rm -f ./.deps/abis_osmo.Plo
rm -f ./.deps/abis_rsl.Plo
rm -f ./.deps/acc.Plo
rm -f ./.deps/assignment_fsm.Plo
rm -f ./.deps/bsc_ctrl.Plo
rm -f ./.deps/bsc_ctrl_lookup.Plo
rm -f ./.deps/bsc_init.Plo
rm -f ./.deps/bsc_rf_ctrl.Plo
rm -f ./.deps/bsc_rll.Plo
rm -f ./.deps/bsc_sccp.Plo
rm -f ./.deps/bsc_stats.Plo
rm -f ./.deps/bsc_subscr_conn_fsm.Plo
rm -f ./.deps/bsc_subscriber.Plo
rm -f ./.deps/bsc_vty.Plo
rm -f ./.deps/bssmap_reset.Plo
rm -f ./.deps/bts.Plo
rm -f ./.deps/bts_ctrl.Plo
rm -f ./.deps/bts_ericsson_rbs2000.Plo
rm -f ./.deps/bts_init.Plo
rm -f ./.deps/bts_ipaccess_nanobts.Plo
rm -f ./.deps/bts_ipaccess_nanobts_omlattr.Plo
rm -f ./.deps/bts_nokia_site.Plo
rm -f ./.deps/bts_osmobts.Plo
rm -f ./.deps/bts_setup_ramp.Plo
rm -f ./.deps/bts_siemens_bs11.Plo
rm -f ./.deps/bts_sm.Plo
rm -f ./.deps/bts_trx.Plo
rm -f ./.deps/bts_trx_ctrl.Plo
rm -f ./.deps/bts_trx_ts_ctrl.Plo
rm -f ./.deps/bts_trx_ts_lchan_ctrl.Plo
rm -f ./.deps/bts_trx_vty.Plo
rm -f ./.deps/bts_unknown.Plo
rm -f ./.deps/bts_vty.Plo
rm -f ./.deps/cbch_scheduler.Plo
rm -f ./.deps/cbsp_link.Plo
rm -f ./.deps/chan_alloc.Plo
rm -f ./.deps/chan_counts.Plo
rm -f ./.deps/codec_pref.Plo
rm -f ./.deps/data_rate_pref.Plo
rm -f ./.deps/e1_config.Plo
rm -f ./.deps/gsm_04_08_rr.Plo
rm -f ./.deps/gsm_08_08.Plo
rm -f ./.deps/gsm_data.Plo
rm -f ./.deps/handover_cfg.Plo
rm -f ./.deps/handover_ctrl.Plo
rm -f ./.deps/handover_decision.Plo
rm -f ./.deps/handover_decision_2.Plo
rm -f ./.deps/handover_fsm.Plo
rm -f ./.deps/handover_logic.Plo
rm -f ./.deps/handover_vty.Plo
rm -f ./.deps/lb.Plo
rm -f ./.deps/lchan.Plo
rm -f ./.deps/lchan_fsm.Plo
rm -f ./.deps/lchan_rtp_fsm.Plo
rm -f ./.deps/lchan_select.Plo
rm -f ./.deps/lcs_loc_req.Plo
rm -f ./.deps/lcs_ta_req.Plo
rm -f ./.deps/meas_feed.Plo
rm -f ./.deps/meas_rep.Plo
rm -f ./.deps/neighbor_ident.Plo
rm -f ./.deps/neighbor_ident_ctrl.Plo
rm -f ./.deps/neighbor_ident_vty.Plo
rm -f ./.deps/net_init.Plo
rm -f ./.deps/nm_bb_transc_fsm.Plo
rm -f ./.deps/nm_bts_fsm.Plo
rm -f ./.deps/nm_bts_sm_fsm.Plo
rm -f ./.deps/nm_channel_fsm.Plo
rm -f ./.deps/nm_common_fsm.Plo
rm -f ./.deps/nm_gprs_cell_fsm.Plo
rm -f ./.deps/nm_gprs_nse_fsm.Plo
rm -f ./.deps/nm_gprs_nsvc_fsm.Plo
rm -f ./.deps/nm_rcarrier_fsm.Plo
rm -f ./.deps/osmo_bsc_bssap.Plo
rm -f ./.deps/osmo_bsc_filter.Plo
rm -f ./.deps/osmo_bsc_grace.Plo
rm -f ./.deps/osmo_bsc_lcls.Plo
rm -f ./.deps/osmo_bsc_main.Po
rm -f ./.deps/osmo_bsc_mgcp.Plo
rm -f ./.deps/osmo_bsc_msc.Plo
rm -f ./.deps/osmo_bsc_sigtran.Plo
rm -f ./.deps/paging.Plo
rm -f ./.deps/pcu_sock.Plo
rm -f ./.deps/penalty_timers.Plo
rm -f ./.deps/power_control.Plo
rm -f ./.deps/smscb.Plo
rm -f ./.deps/smscb_vty.Plo
rm -f ./.deps/system_information.Plo
rm -f ./.deps/timeslot_fsm.Plo
rm -f ./.deps/vgcs_fsm.Plo
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bsc'
Making maintainer-clean in utils
make[2]: Entering directory '/build/src/utils'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db meas_vis
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bs11_config.Po
rm -f ./.deps/isdnsync.Po
rm -f ./.deps/meas_json-meas_json.Po
rm -f ./.deps/meas_vis-meas_vis.Po
rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po
rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po
rm -f ./.deps/osmo_meas_udp2db-meas_db.Po
rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/utils'
Making maintainer-clean in ipaccess
make[2]: Entering directory '/build/src/ipaccess'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f abisip-find ipaccess-config ipaccess-proxy
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/abisip-find.Po
rm -f ./.deps/ipaccess-config.Po
rm -f ./.deps/ipaccess-firmware.Po
rm -f ./.deps/ipaccess-proxy.Po
rm -f ./.deps/network_listen.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/ipaccess'
make[2]: Entering directory '/build/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/src'
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
Making maintainer-clean in abis
make[2]: Entering directory '/build/tests/abis'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f abis_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/abis_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/abis'
Making maintainer-clean in acc
make[2]: Entering directory '/build/tests/acc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f acc_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/acc_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/acc'
Making maintainer-clean in bsc
make[2]: Entering directory '/build/tests/bsc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f bsc_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bsc_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/bsc'
Making maintainer-clean in codec_pref
make[2]: Entering directory '/build/tests/codec_pref'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f codec_pref_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/codec_pref_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/codec_pref'
Making maintainer-clean in gsm0408
make[2]: Entering directory '/build/tests/gsm0408'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f gsm0408_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/gsm0408_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/gsm0408'
Making maintainer-clean in handover
make[2]: Entering directory '/build/tests/handover'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f handover_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/handover_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/handover'
Making maintainer-clean in nanobts_omlattr
make[2]: Entering directory '/build/tests/nanobts_omlattr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f nanobts_omlattr_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/nanobts_omlattr_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/nanobts_omlattr'
Making maintainer-clean in paging
make[2]: Entering directory '/build/tests/paging'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f paging_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/paging_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/paging'
Making maintainer-clean in subscr
make[2]: Entering directory '/build/tests/subscr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f bsc_subscr_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bsc_subscr_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/subscr'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
test -z "atlocal" || rm -f atlocal
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
test -z "atconfig " || rm -f atconfig
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f bscconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2022/
Removing Makefile.in
Removing __pycache__/
Removing aclocal.m4
Removing bscconfig.h.in
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmo-sigtran
Skipping repository deps/libosmo-abis
Skipping repository deps/osmo-mgw
Skipping repository deps/libosmo-netif
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/aoip-mgw-options.check
Removing doc/manuals/aoip-mgw-options.html
Removing doc/manuals/aoip-mgw-options.pdf
Removing doc/manuals/aoip-mgw-options__1.svg
Removing doc/manuals/aoip-mgw-options__2.svg
Removing doc/manuals/aoip-mgw-options__3.svg
Removing doc/manuals/aoip-mgw-options__4.svg
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmobsc-cbsp.check
Removing doc/manuals/osmobsc-cbsp.html
Removing doc/manuals/osmobsc-cbsp.pdf
Removing doc/manuals/osmobsc-usermanual.check
Removing doc/manuals/osmobsc-usermanual.html
Removing doc/manuals/osmobsc-usermanual.pdf
Removing doc/manuals/osmobsc-usermanual__1.svg
Removing doc/manuals/osmobsc-usermanual__10.svg
Removing doc/manuals/osmobsc-usermanual__11.svg
Removing doc/manuals/osmobsc-usermanual__12.svg
Removing doc/manuals/osmobsc-usermanual__13.svg
Removing doc/manuals/osmobsc-usermanual__14.svg
Removing doc/manuals/osmobsc-usermanual__15.svg
Removing doc/manuals/osmobsc-usermanual__16.svg
Removing doc/manuals/osmobsc-usermanual__17.svg
Removing doc/manuals/osmobsc-usermanual__18.svg
Removing doc/manuals/osmobsc-usermanual__19.svg
Removing doc/manuals/osmobsc-usermanual__2.svg
Removing doc/manuals/osmobsc-usermanual__20.svg
Removing doc/manuals/osmobsc-usermanual__21.svg
Removing doc/manuals/osmobsc-usermanual__22.svg
Removing doc/manuals/osmobsc-usermanual__23.svg
Removing doc/manuals/osmobsc-usermanual__24.svg
Removing doc/manuals/osmobsc-usermanual__25.svg
Removing doc/manuals/osmobsc-usermanual__3.svg
Removing doc/manuals/osmobsc-usermanual__4.svg
Removing doc/manuals/osmobsc-usermanual__5.svg
Removing doc/manuals/osmobsc-usermanual__6.svg
Removing doc/manuals/osmobsc-usermanual__7.svg
Removing doc/manuals/osmobsc-usermanual__8.svg
Removing doc/manuals/osmobsc-usermanual__9.svg
Removing doc/manuals/osmobsc-vty-reference.pdf
Removing doc/manuals/osmux-reference.check
Removing doc/manuals/osmux-reference.html
Removing doc/manuals/osmux-reference.pdf
Removing doc/manuals/osmux-reference__1.svg
Removing doc/manuals/osmux-reference__2.svg
Removing doc/manuals/osmux-reference__3.svg
Removing doc/manuals/osmux-reference__4.svg
Removing doc/manuals/osmux-reference__5.svg
Removing doc/manuals/osmux-reference__6.svg
Removing doc/manuals/osmux-reference__7.svg
Removing doc/manuals/vty/bsc_vty_reference.xml
Removing include/Makefile.in
Removing include/osmocom/Makefile.in
Removing include/osmocom/bsc/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing osmo-bsc-1.12.1.31-83793.tar.bz2
Removing osmo-bsc-1.12.1.31-83793.tar.gz
Removing src/Makefile.in
Removing src/ipaccess/.deps/
Removing src/ipaccess/Makefile.in
Removing src/osmo-bsc/.deps/
Removing src/osmo-bsc/Makefile.in
Removing src/utils/.deps/
Removing src/utils/Makefile.in
Removing tests/Makefile.in
Removing tests/abis/.deps/
Removing tests/abis/Makefile.in
Removing tests/acc/.deps/
Removing tests/acc/Makefile.in
Removing tests/bsc/.deps/
Removing tests/bsc/Makefile.in
Removing tests/codec_pref/.deps/
Removing tests/codec_pref/Makefile.in
Removing tests/gsm0408/.deps/
Removing tests/gsm0408/Makefile.in
Removing tests/handover/.deps/
Removing tests/handover/Makefile.in
Removing tests/nanobts_omlattr/.deps/
Removing tests/nanobts_omlattr/Makefile.in
Removing tests/package.m4
Removing tests/paging/.deps/
Removing tests/paging/Makefile.in
Removing tests/subscr/.deps/
Removing tests/subscr/Makefile.in
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing doc/Makefile
Removing doc/Makefile.in
Removing doc/examples/.libs/
Removing doc/examples/Makefile
Removing doc/examples/Makefile.in
Removing doc/examples/lapd-over-datagram-network
Removing doc/examples/lapd-over-datagram-user
Removing doc/examples/lapd-over-datagram/.deps/
Removing doc/examples/lapd-over-datagram/.dirstamp
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-network.o
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-user.o
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/dahdi.lo
Removing src/input/dahdi.o
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git_clean /build/deps/libosmo-netif
+ repos=/build/deps/libosmo-netif
+ [ ! -d /build/deps/libosmo-netif ]
+ [ ! -d /build/deps/libosmo-netif/.git ]
+ git -C /build/deps/libosmo-netif checkout -f HEAD
+ git -C /build/deps/libosmo-netif clean -dxf
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/ipa-stream-client
Removing examples/ipa-stream-client.o
Removing examples/ipa-stream-server
Removing examples/ipa-stream-server.o
Removing examples/osmux-test-input
Removing examples/osmux-test-input.o
Removing examples/osmux-test-output
Removing examples/osmux-test-output.o
Removing examples/rs232-read
Removing examples/rs232-read.o
Removing examples/rs232-write
Removing examples/rs232-write.o
Removing examples/rtp-udp-test-client
Removing examples/rtp-udp-test-client.o
Removing examples/rtp-udp-test-server
Removing examples/rtp-udp-test-server.o
Removing examples/stream-client
Removing examples/stream-client.o
Removing examples/stream-server
Removing examples/stream-server.o
Removing examples/udp-test-client
Removing examples/udp-test-client.o
Removing examples/udp-test-server
Removing examples/udp-test-server.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/netif/Makefile
Removing include/osmocom/netif/Makefile.in
Removing install-sh
Removing libosmo-netif.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/amr.lo
Removing src/amr.o
Removing src/datagram.lo
Removing src/datagram.o
Removing src/ipa.lo
Removing src/ipa.o
Removing src/ipa_unit.lo
Removing src/ipa_unit.o
Removing src/jibuf.lo
Removing src/jibuf.o
Removing src/libosmonetif.la
Removing src/osmux.lo
Removing src/osmux.o
Removing src/osmux_input.lo
Removing src/osmux_input.o
Removing src/osmux_output.lo
Removing src/osmux_output.o
Removing src/prim.lo
Removing src/prim.o
Removing src/rs232.lo
Removing src/rs232.o
Removing src/rtp.lo
Removing src/rtp.o
Removing src/sctp.lo
Removing src/sctp.o
Removing src/stream.lo
Removing src/stream.o
Removing src/stream_cli.lo
Removing src/stream_cli.o
Removing src/stream_srv.lo
Removing src/stream_srv.o
Removing stamp-h1
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/amr/.deps/
Removing tests/atconfig
Removing tests/jibuf/.deps/
Removing tests/osmo-pcap-test/.deps/
Removing tests/osmux/.deps/
Removing tests/stream/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/osmo-amr-inspect
Removing utils/osmo-amr-inspect.o
+ git_clean /build/deps/libosmo-sigtran
+ repos=/build/deps/libosmo-sigtran
+ [ ! -d /build/deps/libosmo-sigtran ]
+ [ ! -d /build/deps/libosmo-sigtran/.git ]
+ git -C /build/deps/libosmo-sigtran checkout -f HEAD
+ git -C /build/deps/libosmo-sigtran clean -dxf
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/Makefile
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile
Removing contrib/systemd/Makefile.in
Removing depcomp
Removing doc/Makefile
Removing doc/Makefile.in
Removing doc/examples/Makefile
Removing doc/examples/Makefile.in
Removing doc/html.tar
Removing doc/libosmo-sigtran.tag
Removing doc/manuals/Makefile
Removing doc/manuals/Makefile.in
Removing doc/sigtran/
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/sccp_demo_user
Removing examples/sccp_demo_user.o
Removing examples/sccp_test_server.o
Removing examples/sccp_test_vty.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/sccp/Makefile
Removing include/osmocom/sccp/Makefile.in
Removing include/osmocom/sigtran/Makefile
Removing include/osmocom/sigtran/Makefile.in
Removing install-sh
Removing libosmo-sigtran.pc
Removing libtool
Removing ltmain.sh
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/ipa.lo
Removing src/ipa.o
Removing src/libosmo-sigtran.la
Removing src/libxua.a
Removing src/libxua_a-xua_msg.o
Removing src/m3ua.lo
Removing src/m3ua.o
Removing src/osmo_ss7.lo
Removing src/osmo_ss7.o
Removing src/osmo_ss7_as.lo
Removing src/osmo_ss7_as.o
Removing src/osmo_ss7_asp.lo
Removing src/osmo_ss7_asp.o
Removing src/osmo_ss7_asp_peer.lo
Removing src/osmo_ss7_asp_peer.o
Removing src/osmo_ss7_hmrt.lo
Removing src/osmo_ss7_hmrt.o
Removing src/osmo_ss7_instance.lo
Removing src/osmo_ss7_instance.o
Removing src/osmo_ss7_link.lo
Removing src/osmo_ss7_link.o
Removing src/osmo_ss7_linkset.lo
Removing src/osmo_ss7_linkset.o
Removing src/osmo_ss7_route.lo
Removing src/osmo_ss7_route.o
Removing src/osmo_ss7_route_table.lo
Removing src/osmo_ss7_route_table.o
Removing src/osmo_ss7_user.lo
Removing src/osmo_ss7_user.o
Removing src/osmo_ss7_vty.lo
Removing src/osmo_ss7_vty.o
Removing src/osmo_ss7_xua_srv.lo
Removing src/osmo_ss7_xua_srv.o
Removing src/sccp2sua.lo
Removing src/sccp2sua.o
Removing src/sccp_helpers.lo
Removing src/sccp_helpers.o
Removing src/sccp_lbcs.lo
Removing src/sccp_lbcs.o
Removing src/sccp_sap.lo
Removing src/sccp_sap.o
Removing src/sccp_sclc.lo
Removing src/sccp_sclc.o
Removing src/sccp_scmg.lo
Removing src/sccp_scmg.o
Removing src/sccp_scoc.lo
Removing src/sccp_scoc.o
Removing src/sccp_scrc.lo
Removing src/sccp_scrc.o
Removing src/sccp_types.lo
Removing src/sccp_types.o
Removing src/sccp_user.lo
Removing src/sccp_user.o
Removing src/sccp_vty.lo
Removing src/sccp_vty.o
Removing src/sua.lo
Removing src/sua.o
Removing src/xua_as_fsm.lo
Removing src/xua_as_fsm.o
Removing src/xua_asp_fsm.lo
Removing src/xua_asp_fsm.o
Removing src/xua_default_lm_fsm.lo
Removing src/xua_default_lm_fsm.o
Removing src/xua_msg.lo
Removing src/xua_msg.o
Removing src/xua_rkm.lo
Removing src/xua_rkm.o
Removing src/xua_shared.lo
Removing src/xua_shared.o
Removing src/xua_snm.lo
Removing src/xua_snm.o
Removing stp/.deps/
Removing stp/.libs/
Removing stp/Makefile
Removing stp/Makefile.in
Removing stp/osmo-stp
Removing stp/stp_main.o
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/m2ua/.deps/
Removing tests/m2ua/Makefile
Removing tests/m2ua/Makefile.in
Removing tests/ss7/.deps/
Removing tests/ss7/Makefile
Removing tests/ss7/Makefile.in
Removing tests/vty/.deps/
Removing tests/vty/Makefile
Removing tests/vty/Makefile.in
Removing tests/xua/.deps/
Removing tests/xua/Makefile
Removing tests/xua/Makefile.in
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ git_clean /build/deps/osmo-mgw
+ repos=/build/deps/osmo-mgw
+ [ ! -d /build/deps/osmo-mgw ]
+ [ ! -d /build/deps/osmo-mgw/.git ]
+ git -C /build/deps/osmo-mgw checkout -f HEAD
+ git -C /build/deps/osmo-mgw clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing bscconfig.h
Removing bscconfig.h.in
Removing compile
Removing config.guess
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/Makefile
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile
Removing contrib/systemd/Makefile.in
Removing depcomp
Removing doc/Makefile
Removing doc/Makefile.in
Removing doc/examples/Makefile
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile
Removing doc/manuals/Makefile.in
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/mgcp/Makefile
Removing include/osmocom/mgcp/Makefile.in
Removing include/osmocom/mgcp_client/Makefile
Removing include/osmocom/mgcp_client/Makefile.in
Removing include/osmocom/mgcp_client/mgcp_common.h
Removing install-sh
Removing libosmo-mgcp-client.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/libosmo-mgcp-client/.deps/
Removing src/libosmo-mgcp-client/.libs/
Removing src/libosmo-mgcp-client/Makefile
Removing src/libosmo-mgcp-client/Makefile.in
Removing src/libosmo-mgcp-client/libosmo-mgcp-client.la
Removing src/libosmo-mgcp-client/mgcp_client.lo
Removing src/libosmo-mgcp-client/mgcp_client.o
Removing src/libosmo-mgcp-client/mgcp_client_endpoint_fsm.lo
Removing src/libosmo-mgcp-client/mgcp_client_endpoint_fsm.o
Removing src/libosmo-mgcp-client/mgcp_client_fsm.lo
Removing src/libosmo-mgcp-client/mgcp_client_fsm.o
Removing src/libosmo-mgcp-client/mgcp_client_pool.lo
Removing src/libosmo-mgcp-client/mgcp_client_pool.o
Removing src/libosmo-mgcp-client/mgcp_client_vty.lo
Removing src/libosmo-mgcp-client/mgcp_client_vty.o
Removing src/libosmo-mgcp/.deps/
Removing src/libosmo-mgcp/Makefile
Removing src/libosmo-mgcp/Makefile.in
Removing src/libosmo-mgcp/libosmo-mgcp.a
Removing src/libosmo-mgcp/mgcp_codec.o
Removing src/libosmo-mgcp/mgcp_conn.o
Removing src/libosmo-mgcp/mgcp_e1.o
Removing src/libosmo-mgcp/mgcp_endp.o
Removing src/libosmo-mgcp/mgcp_iuup.o
Removing src/libosmo-mgcp/mgcp_msg.o
Removing src/libosmo-mgcp/mgcp_network.o
Removing src/libosmo-mgcp/mgcp_osmux.o
Removing src/libosmo-mgcp/mgcp_protocol.o
Removing src/libosmo-mgcp/mgcp_ratectr.o
Removing src/libosmo-mgcp/mgcp_sdp.o
Removing src/libosmo-mgcp/mgcp_stat.o
Removing src/libosmo-mgcp/mgcp_trunk.o
Removing src/libosmo-mgcp/mgcp_vty.o
Removing src/osmo-mgw/.deps/
Removing src/osmo-mgw/.libs/
Removing src/osmo-mgw/Makefile
Removing src/osmo-mgw/Makefile.in
Removing src/osmo-mgw/mgw_main.o
Removing src/osmo-mgw/osmo-mgw
Removing stamp-h1
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/atlocal
Removing tests/mgcp/.deps/
Removing tests/mgcp/Makefile
Removing tests/mgcp/Makefile.in
Removing tests/mgcp_client/.deps/
Removing tests/mgcp_client/Makefile
Removing tests/mgcp_client/Makefile.in
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins10602808731396845715.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-bsc/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-bsc/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 2723197 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
