Skipping 420 KB..
Full Log[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,00) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,00) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts1)[0x612000005020]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts1)[0x612000005020]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
OsmoBTS(osmux)# ?
help Description of the interactive help system
list Print command list
show Show running system information
write Write running configuration to memory, network, or terminal
exit Exit current mode and down to previous mode
end End current mode and change to enable mode.
use Configure Osmux usage
local-ip IP information
local-port Osmux port
batch-factor Batching factor
batch-size Batch size
dummy-padding Dummy padding
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,01) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,01) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts2)[0x6120000051a0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts2)[0x6120000051a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,02) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,02) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts3)[0x612000005320]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts3)[0x612000005320]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,03) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,03) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts4)[0x6120000054a0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts4)[0x6120000054a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,04) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,04) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts5)[0x612000005620]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts5)[0x612000005620]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,05) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,05) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts6)[0x6120000057a0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts6)[0x6120000057a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,06) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,06) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts7)[0x612000005920]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts7)[0x612000005920]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,07) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,07) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BBTRANSC_OP(bts0-trx0)[0x612000004d20]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_bb_transc_fsm.c:254)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BTS_OP(bts0)[0x6120000048a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_bts_fsm.c:175)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BTS INST=(00,ff,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BTS INST=(00,ff,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BTS INST=(00,ff,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BTS_SM_OP(bts_sm)[0x612000004120]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_bts_sm_fsm.c:154)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=SITE-MANAGER INST=(ff,ff,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=SITE-MANAGER INST=(ff,ff,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=SITE-MANAGER INST=(ff,ff,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:345)
[1;36m[1;33mDOML[0;m[1;36m [1;33mNOTICE[0;m[1;36m BTS_SHUTDOWN(bts0)[0x612000004720]{EXIT}: Shutdown process completed successfully, exiting process (bts_shutdown_fsm.c:171)[0;m
RESULTS:
pass: ../../../tests/osmo-bts.vty
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making check in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmobts-usermanual.check osmobts-abis.check rtp-amr.check; \
fi
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
if ! [ -f osmobts-usermanual.adoc ]; then \
ln -s osmobts-usermanual.adoc osmobts-usermanual.adoc; \
fi
if ! [ -f osmobts-abis.adoc ]; then \
ln -s osmobts-abis.adoc osmobts-abis.adoc; \
fi
if ! [ -f rtp-amr.adoc ]; then \
ln -s rtp-amr.adoc rtp-amr.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-bts-1.8.0.21-5bd8/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmobts-usermanual.adoc > osmobts-usermanual.check 2>&1
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-bts-1.8.0.21-5bd8/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmobts-abis.adoc > osmobts-abis.check 2>&1
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-bts-1.8.0.21-5bd8/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' rtp-amr.adoc > rtp-amr.check 2>&1
touch rtp-amr.check
touch osmobts-abis.check
touch osmobts-usermanual.check
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
Making check in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making install in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making install in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
Making install in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-virtual /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-virtual
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
Making install in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-omldummy /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-omldummy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
Making install in osmo-bts-sysmo
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util sysmobts-calib '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-sysmo /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-sysmo
libtool: install: /usr/bin/install -c osmo-bts-sysmo-remote /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-sysmo-remote
libtool: install: /usr/bin/install -c l1fwd-proxy /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/l1fwd-proxy
libtool: install: /usr/bin/install -c sysmobts-mgr /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/sysmobts-mgr
libtool: install: /usr/bin/install -c sysmobts-util /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/sysmobts-util
libtool: install: /usr/bin/install -c sysmobts-calib /build/osmo-bts-1.8.0.21-5bd8/_inst/bin/sysmobts-calib
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making install in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
Making install in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
Making install in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
Making install in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
Making install in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
Making install in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
Making install in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
Making install in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
Making install in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
Making install in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
Making install in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
Making install in sysmobts
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-sysmo'
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.21-5bd8/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/install -c -m 644 ../../../../doc/examples/sysmo/osmo-bts-sysmo.cfg ../../../../doc/examples/sysmo/sysmobts-mgr.cfg '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-sysmo'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg ../../../../doc/examples/sysmo/osmo-bts-sysmo.cfg ../../../../doc/examples/sysmo/sysmobts-mgr.cfg '/build/osmo-bts-1.8.0.21-5bd8/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
install -vDm644 "$i" "/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc'
'osmobts-usermanual.pdf' -> '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
'osmobts-abis.pdf' -> '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
'rtp-amr.pdf' -> '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.21-5bd8/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-bts-virtual.service ../../../../contrib/systemd/osmo-bts-sysmo.service ../../../../contrib/systemd/sysmobts-mgr.service '/build/osmo-bts-1.8.0.21-5bd8/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
Making install in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making installcheck in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making installcheck in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
Making installcheck in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
Making installcheck in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
Making installcheck in osmo-bts-sysmo
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making installcheck in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
Making installcheck in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
Making installcheck in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
Making installcheck in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
Making installcheck in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
Making installcheck in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
Making installcheck in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
Making installcheck in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
Making installcheck in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
Making installcheck in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
Making installcheck in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
Making installcheck in sysmobts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-bts-1.8.0.21-5bd8/_inst/bin' \
## ---------------------------------- ##
## osmo-bts 1.8.0.21-5bd8 test suite. ##
## ---------------------------------- ##
Regression tests.
1: paging ok
2: agch ok
3: cipher ok
4: misc ok
5: handover ok
6: ms_power_loop ok
7: bs_power_loop ok
8: tx_power ok
9: meas ok
10: ta_control ok
11: amr ok
12: csd ok
## ------------- ##
## Test results. ##
## ------------- ##
All 12 tests were successful.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
Making installcheck in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making uninstall in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making uninstall in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
Making uninstall in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
( cd '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin' && rm -f osmo-bts-virtual )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
Making uninstall in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
( cd '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin' && rm -f osmo-bts-omldummy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
Making uninstall in osmo-bts-sysmo
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
( cd '/build/osmo-bts-1.8.0.21-5bd8/_inst/bin' && rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util sysmobts-calib )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making uninstall in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
Making uninstall in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
Making uninstall in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
Making uninstall in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
Making uninstall in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
Making uninstall in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
Making uninstall in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
Making uninstall in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
Making uninstall in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
Making uninstall in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
Making uninstall in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
Making uninstall in sysmobts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
( cd '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual' && rm -f osmo-bts-virtual.cfg )
( cd '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-sysmo' && rm -f osmo-bts-sysmo.cfg sysmobts-mgr.cfg )
( cd '/build/osmo-bts-1.8.0.21-5bd8/_inst/etc/osmocom' && rm -f osmo-bts-virtual.cfg osmo-bts-sysmo.cfg sysmobts-mgr.cfg )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
rm -v "/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/$i"; \
done; \
fi
removed '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
removed '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
removed '/build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
( cd '/build/osmo-bts-1.8.0.21-5bd8/_inst//lib/systemd/system' && rm -f osmo-bts-virtual.service osmo-bts-sysmo.service sysmobts-mgr.service )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
Making uninstall in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making install in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making install in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
Making install in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-virtual /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-virtual
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
Making install in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-omldummy /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-omldummy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
Making install in osmo-bts-sysmo
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util sysmobts-calib '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-sysmo /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-sysmo
libtool: install: /usr/bin/install -c osmo-bts-sysmo-remote /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/osmo-bts-sysmo-remote
libtool: install: /usr/bin/install -c l1fwd-proxy /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/l1fwd-proxy
libtool: install: /usr/bin/install -c sysmobts-mgr /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/sysmobts-mgr
libtool: install: /usr/bin/install -c sysmobts-util /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/sysmobts-util
libtool: install: /usr/bin/install -c sysmobts-calib /tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin/sysmobts-calib
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making install in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
Making install in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
Making install in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
Making install in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
Making install in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
Making install in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
Making install in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
Making install in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
Making install in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
Making install in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
Making install in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
Making install in sysmobts
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-sysmo'
/usr/bin/mkdir -p '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/mkdir -p '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/install -c -m 644 ../../../../doc/examples/sysmo/osmo-bts-sysmo.cfg ../../../../doc/examples/sysmo/sysmobts-mgr.cfg '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-sysmo'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg ../../../../doc/examples/sysmo/osmo-bts-sysmo.cfg ../../../../doc/examples/sysmo/sysmobts-mgr.cfg '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
install -vDm644 "$i" "/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc'
'osmobts-usermanual.pdf' -> '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
'osmobts-abis.pdf' -> '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
'rtp-amr.pdf' -> '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-bts-virtual.service ../../../../contrib/systemd/osmo-bts-sysmo.service ../../../../contrib/systemd/sysmobts-mgr.service '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
Making install in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making uninstall in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making uninstall in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
Making uninstall in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
( cd '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin' && rm -f osmo-bts-virtual )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
Making uninstall in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
( cd '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin' && rm -f osmo-bts-omldummy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
Making uninstall in osmo-bts-sysmo
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
( cd '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/bin' && rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util sysmobts-calib )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making uninstall in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
Making uninstall in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
Making uninstall in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
Making uninstall in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
Making uninstall in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
Making uninstall in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
Making uninstall in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
Making uninstall in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
Making uninstall in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
Making uninstall in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
Making uninstall in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
Making uninstall in sysmobts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
( cd '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual' && rm -f osmo-bts-virtual.cfg )
( cd '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts/examples/osmo-bts-sysmo' && rm -f osmo-bts-sysmo.cfg sysmobts-mgr.cfg )
( cd '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/etc/osmocom' && rm -f osmo-bts-virtual.cfg osmo-bts-sysmo.cfg sysmobts-mgr.cfg )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
rm -v "/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/$i"; \
done; \
fi
removed '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
removed '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
removed '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-46960//build/osmo-bts-1.8.0.21-5bd8/_inst//lib/systemd/system' && rm -f osmo-bts-virtual.service osmo-bts-sysmo.service sysmobts-mgr.service )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
Making uninstall in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
if test -d "osmo-bts-1.8.0.21-5bd8"; then find "osmo-bts-1.8.0.21-5bd8" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.21-5bd8" || { sleep 5 && rm -rf "osmo-bts-1.8.0.21-5bd8"; }; else :; fi
test -d "osmo-bts-1.8.0.21-5bd8" || mkdir "osmo-bts-1.8.0.21-5bd8"
(cd include && make top_distdir=../osmo-bts-1.8.0.21-5bd8 distdir=../osmo-bts-1.8.0.21-5bd8/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
(cd osmo-bts && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/include/osmo-bts \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
(cd src && make top_distdir=../osmo-bts-1.8.0.21-5bd8 distdir=../osmo-bts-1.8.0.21-5bd8/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
(cd common && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/common \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
(cd osmo-bts-virtual && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/osmo-bts-virtual \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
(cd osmo-bts-omldummy && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/osmo-bts-omldummy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
(cd osmo-bts-sysmo && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/osmo-bts-sysmo \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
(cd osmo-bts-trx && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/osmo-bts-trx \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-trx'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-trx'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-trx'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-trx'
(cd osmo-bts-octphy && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/osmo-bts-octphy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-octphy'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-octphy'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-octphy'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-octphy'
(cd osmo-bts-lc15 && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/osmo-bts-lc15 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-lc15'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-lc15'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-lc15'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-lc15'
(cd osmo-bts-oc2g && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/src/osmo-bts-oc2g \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-oc2g'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-oc2g'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-oc2g'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-oc2g'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
(cd tests && make top_distdir=../osmo-bts-1.8.0.21-5bd8 distdir=../osmo-bts-1.8.0.21-5bd8/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
(cd paging && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/paging \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
(cd cipher && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/cipher \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
(cd agch && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/agch \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
(cd misc && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/misc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
(cd handover && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/handover \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
(cd tx_power && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/tx_power \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
(cd power && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/power \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
(cd meas && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/meas \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
(cd ta_control && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/ta_control \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
(cd amr && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/amr \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
(cd csd && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/csd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
(cd sysmobts && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/tests/sysmobts \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
(cd doc && make top_distdir=../osmo-bts-1.8.0.21-5bd8 distdir=../osmo-bts-1.8.0.21-5bd8/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
(cd contrib && make top_distdir=../osmo-bts-1.8.0.21-5bd8 distdir=../osmo-bts-1.8.0.21-5bd8/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
(cd ber && make top_distdir=../../osmo-bts-1.8.0.21-5bd8 distdir=../../osmo-bts-1.8.0.21-5bd8/contrib/ber \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make \
top_distdir="osmo-bts-1.8.0.21-5bd8" distdir="osmo-bts-1.8.0.21-5bd8" \
dist-hook
make[4]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
echo 1.8.0.21-5bd8 > osmo-bts-1.8.0.21-5bd8/.tarball-version
make[4]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
test -n "" \
|| find "osmo-bts-1.8.0.21-5bd8" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-bts-1.8.0.21-5bd8/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-bts-1.8.0.21-5bd8"
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
tardir=osmo-bts-1.8.0.21-5bd8 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-bts-1.8.0.21-5bd8.tar.bz2
tardir=osmo-bts-1.8.0.21-5bd8 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-bts-1.8.0.21-5bd8.tar.gz
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
if test -d "osmo-bts-1.8.0.21-5bd8"; then find "osmo-bts-1.8.0.21-5bd8" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.21-5bd8" || { sleep 5 && rm -rf "osmo-bts-1.8.0.21-5bd8"; }; else :; fi
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making distclean in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../include/osmo-bts" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making distclean in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
rm -rf .libs _libs
test -z "libbts.a libl1sched.a" || rm -f libbts.a libl1sched.a
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/common" || test -z "" || rm -f
rm -f ./.deps/abis.Po
rm -f ./.deps/abis_osmo.Po
rm -f ./.deps/amr.Po
rm -f ./.deps/asci.Po
rm -f ./.deps/bts.Po
rm -f ./.deps/bts_ctrl_commands.Po
rm -f ./.deps/bts_ctrl_lookup.Po
rm -f ./.deps/bts_shutdown_fsm.Po
rm -f ./.deps/bts_sm.Po
rm -f ./.deps/bts_trx.Po
rm -f ./.deps/cbch.Po
rm -f ./.deps/csd_rlp.Po
rm -f ./.deps/csd_v110.Po
rm -f ./.deps/dtx_dl_amr_fsm.Po
rm -f ./.deps/gsm_data.Po
rm -f ./.deps/handover.Po
rm -f ./.deps/l1sap.Po
rm -f ./.deps/lchan.Po
rm -f ./.deps/load_indication.Po
rm -f ./.deps/logging.Po
rm -f ./.deps/main.Po
rm -f ./.deps/measurement.Po
rm -f ./.deps/msg_utils.Po
rm -f ./.deps/nm_bb_transc_fsm.Po
rm -f ./.deps/nm_bts_fsm.Po
rm -f ./.deps/nm_bts_sm_fsm.Po
rm -f ./.deps/nm_channel_fsm.Po
rm -f ./.deps/nm_common_fsm.Po
rm -f ./.deps/nm_gprs_cell_fsm.Po
rm -f ./.deps/nm_gprs_nse_fsm.Po
rm -f ./.deps/nm_gprs_nsvc_fsm.Po
rm -f ./.deps/nm_radio_carrier_fsm.Po
rm -f ./.deps/notification.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/osmux.Po
rm -f ./.deps/paging.Po
rm -f ./.deps/pcu_sock.Po
rm -f ./.deps/phy_link.Po
rm -f ./.deps/power_control.Po
rm -f ./.deps/rsl.Po
rm -f ./.deps/rtp_input_preen.Po
rm -f ./.deps/scheduler.Po
rm -f ./.deps/scheduler_mframe.Po
rm -f ./.deps/sysinfo.Po
rm -f ./.deps/ta_control.Po
rm -f ./.deps/tx_power.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/common'
Making distclean in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
rm -rf .libs _libs
rm -f osmo-bts-virtual
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-virtual" || test -z "" || rm -f
rm -f ./.deps/bts_model.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/osmo_mcast_sock.Po
rm -f ./.deps/scheduler_virtbts.Po
rm -f ./.deps/virtual_um.Po
rm -f ./.deps/virtualbts_vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-virtual'
Making distclean in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-omldummy
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-omldummy" || test -z "" || rm -f
rm -f ./.deps/bts_model.Po
rm -f ./.deps/main.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-omldummy'
Making distclean in osmo-bts-sysmo
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util sysmobts-calib
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-sysmo" || test -z "" || rm -f
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_fwd_main.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_fwd.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts-calib.Po
rm -f ./.deps/sysmobts-layer1.Po
rm -f ./.deps/sysmobts_ctrl.Po
rm -f ./.deps/sysmobts_mgr.Po
rm -f ./.deps/sysmobts_mgr_2050.Po
rm -f ./.deps/sysmobts_mgr_calib.Po
rm -f ./.deps/sysmobts_mgr_nl.Po
rm -f ./.deps/sysmobts_mgr_temp.Po
rm -f ./.deps/sysmobts_mgr_vty.Po
rm -f ./.deps/sysmobts_misc.Po
rm -f ./.deps/sysmobts_nl.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_util.Po
rm -f ./.deps/sysmobts_vty.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-sysmo'
Making distclean in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-trx'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-trx
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-trx" || test -z "" || rm -f
rm -f ./.deps/amr_loop.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/sched_lchan_fcch_sch.Po
rm -f ./.deps/sched_lchan_pdtch.Po
rm -f ./.deps/sched_lchan_rach.Po
rm -f ./.deps/sched_lchan_tchf.Po
rm -f ./.deps/sched_lchan_tchh.Po
rm -f ./.deps/sched_lchan_xcch.Po
rm -f ./.deps/scheduler_trx.Po
rm -f ./.deps/trx_if.Po
rm -f ./.deps/trx_provision_fsm.Po
rm -f ./.deps/trx_vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-trx'
Making distclean in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-octphy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f osmo-bts-octphy
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-octphy" || test -z "" || rm -f
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_oml.Po
rm -f ./.deps/l1_tch.Po
rm -f ./.deps/l1_utils.Po
rm -f ./.deps/main.Po
rm -f ./.deps/octphy_hw_api.Po
rm -f ./.deps/octphy_vty.Po
rm -f ./.deps/octpkt.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-octphy'
Making distclean in osmo-bts-lc15
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-lc15'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-lc15 lc15bts-mgr lc15bts-util
rm -f *.tab.c
test -z "" || rm -f
rm -f misc/*.o
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-lc15" || test -z "" || rm -f
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/lc15bts.Po
rm -f ./.deps/lc15bts_vty.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/lc15bts_bid.Po
rm -f misc/.deps/lc15bts_bts.Po
rm -f misc/.deps/lc15bts_clock.Po
rm -f misc/.deps/lc15bts_led.Po
rm -f misc/.deps/lc15bts_mgr.Po
rm -f misc/.deps/lc15bts_mgr_calib.Po
rm -f misc/.deps/lc15bts_mgr_nl.Po
rm -f misc/.deps/lc15bts_mgr_temp.Po
rm -f misc/.deps/lc15bts_mgr_vty.Po
rm -f misc/.deps/lc15bts_misc.Po
rm -f misc/.deps/lc15bts_nl.Po
rm -f misc/.deps/lc15bts_par.Po
rm -f misc/.deps/lc15bts_power.Po
rm -f misc/.deps/lc15bts_swd.Po
rm -f misc/.deps/lc15bts_temp.Po
rm -f misc/.deps/lc15bts_util.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-lc15'
Making distclean in osmo-bts-oc2g
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-oc2g'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-bts-oc2g oc2gbts-mgr oc2gbts-util
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f misc/*.o
test . = "../../../../src/osmo-bts-oc2g" || test -z "" || rm -f
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oc2gbts.Po
rm -f ./.deps/oc2gbts_vty.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/oc2gbts_bid.Po
rm -f misc/.deps/oc2gbts_bts.Po
rm -f misc/.deps/oc2gbts_clock.Po
rm -f misc/.deps/oc2gbts_led.Po
rm -f misc/.deps/oc2gbts_mgr.Po
rm -f misc/.deps/oc2gbts_mgr_calib.Po
rm -f misc/.deps/oc2gbts_mgr_nl.Po
rm -f misc/.deps/oc2gbts_mgr_temp.Po
rm -f misc/.deps/oc2gbts_mgr_vty.Po
rm -f misc/.deps/oc2gbts_misc.Po
rm -f misc/.deps/oc2gbts_nl.Po
rm -f misc/.deps/oc2gbts_par.Po
rm -f misc/.deps/oc2gbts_power.Po
rm -f misc/.deps/oc2gbts_swd.Po
rm -f misc/.deps/oc2gbts_temp.Po
rm -f misc/.deps/oc2gbts_util.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src/osmo-bts-oc2g'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../src" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/src'
Making distclean in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making distclean in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f paging_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/paging" || test -z "" || rm -f
rm -f ./.deps/paging_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/paging'
Making distclean in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f cipher_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/cipher" || test -z "" || rm -f
rm -f ./.deps/cipher_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/cipher'
Making distclean in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f agch_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/agch" || test -z "" || rm -f
rm -f ./.deps/agch_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/agch'
Making distclean in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f misc_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/misc" || test -z "" || rm -f
rm -f ./.deps/misc_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/misc'
Making distclean in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f handover_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/handover" || test -z "" || rm -f
rm -f ./.deps/handover_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/handover'
Making distclean in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f tx_power_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/tx_power" || test -z "" || rm -f
rm -f ./.deps/stubs.Po
rm -f ./.deps/tx_power_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/tx_power'
Making distclean in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f ms_power_loop_test bs_power_loop_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/power" || test -z "" || rm -f
rm -f ./.deps/bs_power_loop_test.Po
rm -f ./.deps/ms_power_loop_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/power'
Making distclean in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f meas_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/meas" || test -z "" || rm -f
rm -f ./.deps/meas_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/meas'
Making distclean in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f ta_control_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/ta_control" || test -z "" || rm -f
rm -f ./.deps/ta_control_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/ta_control'
Making distclean in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f amr_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/amr" || test -z "" || rm -f
rm -f ./.deps/amr_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/amr'
Making distclean in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f csd_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/csd" || test -z "" || rm -f
rm -f ./.deps/csd_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/csd'
Making distclean in sysmobts
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f sysmobts_test
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/sysmobts" || test -z "" || rm -f
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_test.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests/sysmobts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../tests" || test -z "" || rm -f
test -z "atconfig" || rm -f atconfig
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/tests'
Making distclean in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/manuals" || test -z "" || rm -f
rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-sysmo-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-sysmo-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-sysmo-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-sysmo-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-sysmo-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-sysmo-vty-reference.xml.inc.merged common build generated/.pdf_shrink_marker
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/doc'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../contrib/systemd" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/systemd'
Making distclean in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f rtp_ber rtp_gen_map
test . = "../../../../contrib/ber" || test -z "" || rm -f
rm -f ./.deps/rtp_ber.Po
rm -f ./.deps/rtp_gen_map.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f btsconfig.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || test -z "" || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-bts-1.8.0.21-5bd8/_build/sub'
if test -d "osmo-bts-1.8.0.21-5bd8"; then find "osmo-bts-1.8.0.21-5bd8" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.21-5bd8" || { sleep 5 && rm -rf "osmo-bts-1.8.0.21-5bd8"; }; else :; fi
========================================================
osmo-bts-1.8.0.21-5bd8 archives ready for distribution:
osmo-bts-1.8.0.21-5bd8.tar.gz
osmo-bts-1.8.0.21-5bd8.tar.bz2
========================================================
+ [ 1 = 1 ]
+ [ 1 = 1 ]
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \
-e "s|@@VARIANT@@|osmo-bts-virtual|" \
-e "s|@@REV_NUMBER@@|1.8.0.21-5bd8|" \
-e "s|@@REV_DATE@@|19th November 2024|" \
-e "s|@@CR_YEAR@@|2024|" \
./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml
xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml
sed -e "s|@@GENERATED@@|vty/osmobts-sysmo-vty-reference.xml.inc|" \
-e "s|@@VARIANT@@|osmo-bts-sysmo|" \
-e "s|@@REV_NUMBER@@|1.8.0.21-5bd8|" \
-e "s|@@REV_DATE@@|19th November 2024|" \
-e "s|@@CR_YEAR@@|2024|" \
./vty/osmobts-vty-reference.xml > vty/osmobts-sysmo-vty-reference.xml
# a) Invoke osmo-bts-% to generate the list of commands first
../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen"
Generating the VTY reference in mode 'default' (all commands except deprecated and hidden)
# ... filter garbage potentially printed by libraries to stdout
sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen"
# b) Merge the result of a) with global and local additions
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh \
/opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged"
+ mktemp
+ combined=/tmp/tmp.FplntQvfIS
+ mktemp
+ combine_src=/tmp/tmp.rZx4BZMjRf
+ cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.FplntQvfIS
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.FplntQvfIS /tmp/tmp.rZx4BZMjRf
+ xsltproc -o /tmp/tmp.FplntQvfIS --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.rZx4BZMjRf
+ [ -n ./vty/bts_vty_additions.xml ]
+ realpath ./vty/bts_vty_additions.xml
+ addition=/build/doc/manuals/vty/bts_vty_additions.xml
+ shift
+ cp /tmp/tmp.FplntQvfIS /tmp/tmp.rZx4BZMjRf
+ xsltproc -o /tmp/tmp.FplntQvfIS --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.rZx4BZMjRf
+ [ -n ]
+ cat /tmp/tmp.FplntQvfIS
+ rm -f /tmp/tmp.rZx4BZMjRf
+ rm -f /tmp/tmp.FplntQvfIS
# c) Convert the result of b) into a valid docbook
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc
# a) Invoke osmo-bts-% to generate the list of commands first
../../src/osmo-bts-sysmo/osmo-bts-sysmo --vty-ref-mode default --vty-ref-xml > "vty/osmobts-sysmo-vty-reference.xml.inc.gen"
Generating the VTY reference in mode 'default' (all commands except deprecated and hidden)
# ... filter garbage potentially printed by libraries to stdout
sed -i '/^<vtydoc/,$!d' "vty/osmobts-sysmo-vty-reference.xml.inc.gen"
# b) Merge the result of a) with global and local additions
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh \
/opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-sysmo-vty-reference.xml.inc.gen" \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
./vty/*additions*.xml > "vty/osmobts-sysmo-vty-reference.xml.inc.merged"
+ mktemp
+ combined=/tmp/tmp.HqRbcMN0vw
+ mktemp
+ combine_src=/tmp/tmp.JxVAwMFskm
+ cp vty/osmobts-sysmo-vty-reference.xml.inc.gen /tmp/tmp.HqRbcMN0vw
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.HqRbcMN0vw /tmp/tmp.JxVAwMFskm
+ xsltproc -o /tmp/tmp.HqRbcMN0vw --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.JxVAwMFskm
+ [ -n ./vty/bts_vty_additions.xml ]
+ realpath ./vty/bts_vty_additions.xml
+ addition=/build/doc/manuals/vty/bts_vty_additions.xml
+ shift
+ cp /tmp/tmp.HqRbcMN0vw /tmp/tmp.JxVAwMFskm
+ xsltproc -o /tmp/tmp.HqRbcMN0vw --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.JxVAwMFskm
+ [ -n ]
+ cat /tmp/tmp.HqRbcMN0vw
+ rm -f /tmp/tmp.JxVAwMFskm
+ rm -f /tmp/tmp.HqRbcMN0vw
# c) Convert the result of b) into a valid docbook
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-sysmo-vty-reference.xml.inc.merged" > vty/osmobts-sysmo-vty-reference.xml.inc
set -x && \
export GIT_DATE="2024-Jul-19" && \
export REVNUMBER="DRAFT 1.8.0-21-g5bd8" && \
export TEMPFILE="/build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml" && \
/opt/osmo-gsm-manuals/build/docbook-set-revhistory.py "vty/osmobts-virtual-vty-reference.xml" && \
dblatex \
--config /opt/osmo-gsm-manuals/build/dblatex_config.xml \
--xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \
\
-P draft.mode=no \
-o vty/osmobts-virtual-vty-reference.pdf \
"$TEMPFILE" && \
rm $TEMPFILE
+ export GIT_DATE=2024-Jul-19
+ GIT_DATE=2024-Jul-19
+ export 'REVNUMBER=DRAFT 1.8.0-21-g5bd8'
+ REVNUMBER='DRAFT 1.8.0-21-g5bd8'
+ export TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
+ TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
+ /opt/osmo-gsm-manuals/build/docbook-set-revhistory.py vty/osmobts-virtual-vty-reference.xml
Changing revhistory to DRAFT 1.8.0-21-g5bd8, 2024-Jul-19...
+ dblatex --config /opt/osmo-gsm-manuals/build/dblatex_config.xml '--xslt-opts=--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty' -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf /build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
Build the book set list...
Build the listings...
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
Build _temp_osmobts-virtual-vty-reference.pdf
'osmobts-virtual-vty-reference.pdf' successfully built
+ rm /build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
xmllint --xinclude --postvalid --noout vty/osmobts-sysmo-vty-reference.xml
set -x && \
export GIT_DATE="2024-Jul-19" && \
export REVNUMBER="DRAFT 1.8.0-21-g5bd8" && \
export TEMPFILE="/build/doc/manuals/vty/_temp_osmobts-sysmo-vty-reference.xml" && \
/opt/osmo-gsm-manuals/build/docbook-set-revhistory.py "vty/osmobts-sysmo-vty-reference.xml" && \
dblatex \
--config /opt/osmo-gsm-manuals/build/dblatex_config.xml \
--xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \
\
-P draft.mode=no \
-o vty/osmobts-sysmo-vty-reference.pdf \
"$TEMPFILE" && \
rm $TEMPFILE
+ export GIT_DATE=2024-Jul-19
+ GIT_DATE=2024-Jul-19
+ export 'REVNUMBER=DRAFT 1.8.0-21-g5bd8'
+ REVNUMBER='DRAFT 1.8.0-21-g5bd8'
+ export TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-sysmo-vty-reference.xml
+ TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-sysmo-vty-reference.xml
+ /opt/osmo-gsm-manuals/build/docbook-set-revhistory.py vty/osmobts-sysmo-vty-reference.xml
Changing revhistory to DRAFT 1.8.0-21-g5bd8, 2024-Jul-19...
+ dblatex --config /opt/osmo-gsm-manuals/build/dblatex_config.xml '--xslt-opts=--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty' -P draft.mode=no -o vty/osmobts-sysmo-vty-reference.pdf /build/doc/manuals/vty/_temp_osmobts-sysmo-vty-reference.xml
Build the book set list...
Build the listings...
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
Build _temp_osmobts-sysmo-vty-reference.pdf
'osmobts-sysmo-vty-reference.pdf' successfully built
+ rm /build/doc/manuals/vty/_temp_osmobts-sysmo-vty-reference.xml
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-sysmo-vty-reference.pdf
* osmobts-usermanual.pdf: 888K
* osmobts-abis.pdf: 504K
* rtp-amr.pdf: 444K
* vty/osmobts-virtual-vty-reference.pdf: 288K
* vty/osmobts-sysmo-vty-reference.pdf: 308K
[ -n "osmo-bts" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-bts/master"
cp osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-sysmo-vty-reference.pdf "_publish_tmpdir/osmo-bts/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-bts" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-bts/
osmo-bts/master/
osmo-bts/master/osmobts-abis.pdf
osmo-bts/master/osmobts-sysmo-vty-reference.pdf
osmo-bts/master/osmobts-usermanual.pdf
osmo-bts/master/osmobts-virtual-vty-reference.pdf
osmo-bts/master/rtp-amr.pdf
sent 50,854 bytes received 19,269 bytes 140,246.00 bytes/sec
total size is 2,481,360 speedup is 35.39
rm -rf "_publish_tmpdir"
rm vty/osmobts-sysmo-vty-reference.xml.inc vty/osmobts-sysmo-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc
make: Leaving directory '/build/doc/manuals'
+ make -j 8 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmo-bts
make[2]: Entering directory '/build/include/osmo-bts'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/include/osmo-bts'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
Making maintainer-clean in common
make[2]: Entering directory '/build/src/common'
rm -rf .libs _libs
test -z "libbts.a libl1sched.a" || rm -f libbts.a libl1sched.a
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/abis.Po
rm -f ./.deps/abis_osmo.Po
rm -f ./.deps/amr.Po
rm -f ./.deps/asci.Po
rm -f ./.deps/bts.Po
rm -f ./.deps/bts_ctrl_commands.Po
rm -f ./.deps/bts_ctrl_lookup.Po
rm -f ./.deps/bts_shutdown_fsm.Po
rm -f ./.deps/bts_sm.Po
rm -f ./.deps/bts_trx.Po
rm -f ./.deps/cbch.Po
rm -f ./.deps/csd_rlp.Po
rm -f ./.deps/csd_v110.Po
rm -f ./.deps/dtx_dl_amr_fsm.Po
rm -f ./.deps/gsm_data.Po
rm -f ./.deps/handover.Po
rm -f ./.deps/l1sap.Po
rm -f ./.deps/lchan.Po
rm -f ./.deps/load_indication.Po
rm -f ./.deps/logging.Po
rm -f ./.deps/main.Po
rm -f ./.deps/measurement.Po
rm -f ./.deps/msg_utils.Po
rm -f ./.deps/nm_bb_transc_fsm.Po
rm -f ./.deps/nm_bts_fsm.Po
rm -f ./.deps/nm_bts_sm_fsm.Po
rm -f ./.deps/nm_channel_fsm.Po
rm -f ./.deps/nm_common_fsm.Po
rm -f ./.deps/nm_gprs_cell_fsm.Po
rm -f ./.deps/nm_gprs_nse_fsm.Po
rm -f ./.deps/nm_gprs_nsvc_fsm.Po
rm -f ./.deps/nm_radio_carrier_fsm.Po
rm -f ./.deps/notification.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/osmux.Po
rm -f ./.deps/paging.Po
rm -f ./.deps/pcu_sock.Po
rm -f ./.deps/phy_link.Po
rm -f ./.deps/power_control.Po
rm -f ./.deps/rsl.Po
rm -f ./.deps/rtp_input_preen.Po
rm -f ./.deps/scheduler.Po
rm -f ./.deps/scheduler_mframe.Po
rm -f ./.deps/sysinfo.Po
rm -f ./.deps/ta_control.Po
rm -f ./.deps/tx_power.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/common'
Making maintainer-clean in osmo-bts-virtual
make[2]: Entering directory '/build/src/osmo-bts-virtual'
rm -rf .libs _libs
rm -f osmo-bts-virtual
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bts_model.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/osmo_mcast_sock.Po
rm -f ./.deps/scheduler_virtbts.Po
rm -f ./.deps/virtual_um.Po
rm -f ./.deps/virtualbts_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-virtual'
Making maintainer-clean in osmo-bts-omldummy
make[2]: Entering directory '/build/src/osmo-bts-omldummy'
rm -rf .libs _libs
rm -f osmo-bts-omldummy
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bts_model.Po
rm -f ./.deps/main.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-omldummy'
Making maintainer-clean in osmo-bts-sysmo
make[2]: Entering directory '/build/src/osmo-bts-sysmo'
rm -rf .libs _libs
rm -f *.o
rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util sysmobts-calib
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_fwd_main.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_fwd.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts-calib.Po
rm -f ./.deps/sysmobts-layer1.Po
rm -f ./.deps/sysmobts_ctrl.Po
rm -f ./.deps/sysmobts_mgr.Po
rm -f ./.deps/sysmobts_mgr_2050.Po
rm -f ./.deps/sysmobts_mgr_calib.Po
rm -f ./.deps/sysmobts_mgr_nl.Po
rm -f ./.deps/sysmobts_mgr_temp.Po
rm -f ./.deps/sysmobts_mgr_vty.Po
rm -f ./.deps/sysmobts_misc.Po
rm -f ./.deps/sysmobts_nl.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_util.Po
rm -f ./.deps/sysmobts_vty.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-sysmo'
Making maintainer-clean in osmo-bts-trx
make[2]: Entering directory '/build/src/osmo-bts-trx'
rm -rf .libs _libs
rm -f *.o
rm -f osmo-bts-trx
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/amr_loop.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/sched_lchan_fcch_sch.Po
rm -f ./.deps/sched_lchan_pdtch.Po
rm -f ./.deps/sched_lchan_rach.Po
rm -f ./.deps/sched_lchan_tchf.Po
rm -f ./.deps/sched_lchan_tchh.Po
rm -f ./.deps/sched_lchan_xcch.Po
rm -f ./.deps/scheduler_trx.Po
rm -f ./.deps/trx_if.Po
rm -f ./.deps/trx_provision_fsm.Po
rm -f ./.deps/trx_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-trx'
Making maintainer-clean in osmo-bts-octphy
make[2]: Entering directory '/build/src/osmo-bts-octphy'
rm -rf .libs _libs
rm -f *.o
rm -f osmo-bts-octphy
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_oml.Po
rm -f ./.deps/l1_tch.Po
rm -f ./.deps/l1_utils.Po
rm -f ./.deps/main.Po
rm -f ./.deps/octphy_hw_api.Po
rm -f ./.deps/octphy_vty.Po
rm -f ./.deps/octpkt.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-octphy'
Making maintainer-clean in osmo-bts-lc15
make[2]: Entering directory '/build/src/osmo-bts-lc15'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-lc15 lc15bts-mgr lc15bts-util
rm -f *.tab.c
rm -f misc/*.o
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/lc15bts.Po
rm -f ./.deps/lc15bts_vty.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/lc15bts_bid.Po
rm -f misc/.deps/lc15bts_bts.Po
rm -f misc/.deps/lc15bts_clock.Po
rm -f misc/.deps/lc15bts_led.Po
rm -f misc/.deps/lc15bts_mgr.Po
rm -f misc/.deps/lc15bts_mgr_calib.Po
rm -f misc/.deps/lc15bts_mgr_nl.Po
rm -f misc/.deps/lc15bts_mgr_temp.Po
rm -f misc/.deps/lc15bts_mgr_vty.Po
rm -f misc/.deps/lc15bts_misc.Po
rm -f misc/.deps/lc15bts_nl.Po
rm -f misc/.deps/lc15bts_par.Po
rm -f misc/.deps/lc15bts_power.Po
rm -f misc/.deps/lc15bts_swd.Po
rm -f misc/.deps/lc15bts_temp.Po
rm -f misc/.deps/lc15bts_util.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-lc15'
Making maintainer-clean in osmo-bts-oc2g
make[2]: Entering directory '/build/src/osmo-bts-oc2g'
rm -rf .libs _libs
rm -f *.o
rm -f osmo-bts-oc2g oc2gbts-mgr oc2gbts-util
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
rm -f misc/*.o
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oc2gbts.Po
rm -f ./.deps/oc2gbts_vty.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/oc2gbts_bid.Po
rm -f misc/.deps/oc2gbts_bts.Po
rm -f misc/.deps/oc2gbts_clock.Po
rm -f misc/.deps/oc2gbts_led.Po
rm -f misc/.deps/oc2gbts_mgr.Po
rm -f misc/.deps/oc2gbts_mgr_calib.Po
rm -f misc/.deps/oc2gbts_mgr_nl.Po
rm -f misc/.deps/oc2gbts_mgr_temp.Po
rm -f misc/.deps/oc2gbts_mgr_vty.Po
rm -f misc/.deps/oc2gbts_misc.Po
rm -f misc/.deps/oc2gbts_nl.Po
rm -f misc/.deps/oc2gbts_par.Po
rm -f misc/.deps/oc2gbts_power.Po
rm -f misc/.deps/oc2gbts_swd.Po
rm -f misc/.deps/oc2gbts_temp.Po
rm -f misc/.deps/oc2gbts_util.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-oc2g'
make[2]: Entering directory '/build/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/src'
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
Making maintainer-clean in paging
make[2]: Entering directory '/build/tests/paging'
rm -rf .libs _libs
rm -f *.o
rm -f paging_test
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/paging_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/paging'
Making maintainer-clean in cipher
make[2]: Entering directory '/build/tests/cipher'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f cipher_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/cipher_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/cipher'
Making maintainer-clean in agch
make[2]: Entering directory '/build/tests/agch'
rm -rf .libs _libs
rm -f agch_test
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/agch_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/agch'
Making maintainer-clean in misc
make[2]: Entering directory '/build/tests/misc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f misc_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/misc_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/misc'
Making maintainer-clean in handover
make[2]: Entering directory '/build/tests/handover'
rm -f handover_test
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/handover_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/handover'
Making maintainer-clean in tx_power
make[2]: Entering directory '/build/tests/tx_power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f tx_power_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/stubs.Po
rm -f ./.deps/tx_power_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/tx_power'
Making maintainer-clean in power
make[2]: Entering directory '/build/tests/power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f ms_power_loop_test bs_power_loop_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bs_power_loop_test.Po
rm -f ./.deps/ms_power_loop_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/power'
Making maintainer-clean in meas
make[2]: Entering directory '/build/tests/meas'
rm -rf .libs _libs
rm -f *.o
rm -f meas_test
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/meas_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/meas'
Making maintainer-clean in ta_control
make[2]: Entering directory '/build/tests/ta_control'
rm -rf .libs _libs
rm -f *.o
rm -f ta_control_test
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/ta_control_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/ta_control'
Making maintainer-clean in amr
make[2]: Entering directory '/build/tests/amr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f amr_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/amr_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/amr'
Making maintainer-clean in csd
make[2]: Entering directory '/build/tests/csd'
rm -rf .libs _libs
rm -f csd_test
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/csd_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/csd'
Making maintainer-clean in sysmobts
make[2]: Entering directory '/build/tests/sysmobts'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f sysmobts_test
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_test.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/sysmobts'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
test -z "atconfig" || rm -f atconfig
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
Making maintainer-clean in ber
make[2]: Entering directory '/build/contrib/ber'
rm -rf .libs _libs
rm -f rtp_ber rtp_gen_map
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/rtp_ber.Po
rm -f ./.deps/rtp_gen_map.Po
rm -f Makefile
make[2]: Leaving directory '/build/contrib/ber'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f btsconfig.h stamp-h1
rm -f libtool config.lt
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2022/
Removing Makefile.in
Removing aclocal.m4
Removing btsconfig.h.in
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/ber/.deps/
Removing contrib/ber/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmo-abis
Skipping repository deps/libosmocore
Skipping repository deps/layer1-headers
Skipping repository deps/libosmo-netif
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmobts-abis.check
Removing doc/manuals/osmobts-abis.html
Removing doc/manuals/osmobts-abis.pdf
Removing doc/manuals/osmobts-abis__1.svg
Removing doc/manuals/osmobts-abis__10.svg
Removing doc/manuals/osmobts-abis__11.svg
Removing doc/manuals/osmobts-abis__12.svg
Removing doc/manuals/osmobts-abis__13.svg
Removing doc/manuals/osmobts-abis__14.svg
Removing doc/manuals/osmobts-abis__15.svg
Removing doc/manuals/osmobts-abis__2.svg
Removing doc/manuals/osmobts-abis__3.svg
Removing doc/manuals/osmobts-abis__4.svg
Removing doc/manuals/osmobts-abis__5.svg
Removing doc/manuals/osmobts-abis__6.svg
Removing doc/manuals/osmobts-abis__7.svg
Removing doc/manuals/osmobts-abis__8.svg
Removing doc/manuals/osmobts-abis__9.svg
Removing doc/manuals/osmobts-usermanual.check
Removing doc/manuals/osmobts-usermanual.html
Removing doc/manuals/osmobts-usermanual.pdf
Removing doc/manuals/osmobts-usermanual__1.svg
Removing doc/manuals/osmobts-usermanual__10.svg
Removing doc/manuals/osmobts-usermanual__11.svg
Removing doc/manuals/osmobts-usermanual__12.svg
Removing doc/manuals/osmobts-usermanual__13.svg
Removing doc/manuals/osmobts-usermanual__14.svg
Removing doc/manuals/osmobts-usermanual__15.svg
Removing doc/manuals/osmobts-usermanual__16.svg
Removing doc/manuals/osmobts-usermanual__17.svg
Removing doc/manuals/osmobts-usermanual__18.svg
Removing doc/manuals/osmobts-usermanual__19.svg
Removing doc/manuals/osmobts-usermanual__2.svg
Removing doc/manuals/osmobts-usermanual__20.svg
Removing doc/manuals/osmobts-usermanual__21.svg
Removing doc/manuals/osmobts-usermanual__22.svg
Removing doc/manuals/osmobts-usermanual__23.svg
Removing doc/manuals/osmobts-usermanual__24.svg
Removing doc/manuals/osmobts-usermanual__25.svg
Removing doc/manuals/osmobts-usermanual__26.svg
Removing doc/manuals/osmobts-usermanual__3.svg
Removing doc/manuals/osmobts-usermanual__4.svg
Removing doc/manuals/osmobts-usermanual__5.svg
Removing doc/manuals/osmobts-usermanual__6.svg
Removing doc/manuals/osmobts-usermanual__7.svg
Removing doc/manuals/osmobts-usermanual__8.svg
Removing doc/manuals/osmobts-usermanual__9.svg
Removing doc/manuals/rtp-amr.check
Removing doc/manuals/rtp-amr.html
Removing doc/manuals/rtp-amr.pdf
Removing doc/manuals/rtp-amr__1.svg
Removing doc/manuals/rtp-amr__10.svg
Removing doc/manuals/rtp-amr__11.svg
Removing doc/manuals/rtp-amr__12.svg
Removing doc/manuals/rtp-amr__13.svg
Removing doc/manuals/rtp-amr__14.svg
Removing doc/manuals/rtp-amr__15.svg
Removing doc/manuals/rtp-amr__16.svg
Removing doc/manuals/rtp-amr__17.svg
Removing doc/manuals/rtp-amr__18.svg
Removing doc/manuals/rtp-amr__19.svg
Removing doc/manuals/rtp-amr__2.svg
Removing doc/manuals/rtp-amr__20.svg
Removing doc/manuals/rtp-amr__21.svg
Removing doc/manuals/rtp-amr__22.svg
Removing doc/manuals/rtp-amr__23.svg
Removing doc/manuals/rtp-amr__24.svg
Removing doc/manuals/rtp-amr__25.svg
Removing doc/manuals/rtp-amr__26.svg
Removing doc/manuals/rtp-amr__27.svg
Removing doc/manuals/rtp-amr__3.svg
Removing doc/manuals/rtp-amr__4.svg
Removing doc/manuals/rtp-amr__5.svg
Removing doc/manuals/rtp-amr__6.svg
Removing doc/manuals/rtp-amr__7.svg
Removing doc/manuals/rtp-amr__8.svg
Removing doc/manuals/rtp-amr__9.svg
Removing doc/manuals/vty/osmobts-sysmo-vty-reference.pdf
Removing doc/manuals/vty/osmobts-sysmo-vty-reference.xml.inc.gen
Removing doc/manuals/vty/osmobts-sysmo-vty-reference.xml.inc.merged
Removing doc/manuals/vty/osmobts-virtual-vty-reference.pdf
Removing doc/manuals/vty/osmobts-virtual-vty-reference.xml
Removing doc/manuals/vty/osmobts-virtual-vty-reference.xml.inc.gen
Removing doc/manuals/vty/osmobts-virtual-vty-reference.xml.inc.merged
Removing include/Makefile.in
Removing include/osmo-bts/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing missing
Removing osmo-bts-1.8.0.21-5bd8.tar.bz2
Removing osmo-bts-1.8.0.21-5bd8.tar.gz
Removing src/Makefile.in
Removing src/common/.deps/
Removing src/common/Makefile.in
Removing src/osmo-bts-lc15/.deps/
Removing src/osmo-bts-lc15/Makefile.in
Removing src/osmo-bts-lc15/misc/.deps/
Removing src/osmo-bts-oc2g/.deps/
Removing src/osmo-bts-oc2g/Makefile.in
Removing src/osmo-bts-oc2g/misc/.deps/
Removing src/osmo-bts-octphy/.deps/
Removing src/osmo-bts-octphy/Makefile.in
Removing src/osmo-bts-omldummy/.deps/
Removing src/osmo-bts-omldummy/Makefile.in
Removing src/osmo-bts-sysmo/.deps/
Removing src/osmo-bts-sysmo/Makefile.in
Removing src/osmo-bts-trx/.deps/
Removing src/osmo-bts-trx/Makefile.in
Removing src/osmo-bts-virtual/.deps/
Removing src/osmo-bts-virtual/Makefile.in
Removing tests/Makefile.in
Removing tests/agch/.deps/
Removing tests/agch/Makefile.in
Removing tests/amr/.deps/
Removing tests/amr/Makefile.in
Removing tests/cipher/.deps/
Removing tests/cipher/Makefile.in
Removing tests/csd/.deps/
Removing tests/csd/Makefile.in
Removing tests/handover/.deps/
Removing tests/handover/Makefile.in
Removing tests/meas/.deps/
Removing tests/meas/Makefile.in
Removing tests/misc/.deps/
Removing tests/misc/Makefile.in
Removing tests/package.m4
Removing tests/paging/.deps/
Removing tests/paging/Makefile.in
Removing tests/power/.deps/
Removing tests/power/Makefile.in
Removing tests/sysmobts/.deps/
Removing tests/sysmobts/Makefile.in
Removing tests/ta_control/.deps/
Removing tests/ta_control/Makefile.in
Removing tests/testsuite
Removing tests/tx_power/.deps/
Removing tests/tx_power/Makefile.in
+ [ -d /build/deps ]
+ git_clean /build/deps/layer1-headers
+ repos=/build/deps/layer1-headers
+ [ ! -d /build/deps/layer1-headers ]
+ [ ! -d /build/deps/layer1-headers/.git ]
+ git -C /build/deps/layer1-headers checkout -f HEAD
+ git -C /build/deps/layer1-headers clean -dxf
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git_clean /build/deps/libosmo-netif
+ repos=/build/deps/libosmo-netif
+ [ ! -d /build/deps/libosmo-netif ]
+ [ ! -d /build/deps/libosmo-netif/.git ]
+ git -C /build/deps/libosmo-netif checkout -f HEAD
+ git -C /build/deps/libosmo-netif clean -dxf
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/ipa-stream-client
Removing examples/ipa-stream-client.o
Removing examples/ipa-stream-server
Removing examples/ipa-stream-server.o
Removing examples/osmux-test-input
Removing examples/osmux-test-input.o
Removing examples/osmux-test-output
Removing examples/osmux-test-output.o
Removing examples/rs232-read
Removing examples/rs232-read.o
Removing examples/rs232-write
Removing examples/rs232-write.o
Removing examples/rtp-udp-test-client
Removing examples/rtp-udp-test-client.o
Removing examples/rtp-udp-test-server
Removing examples/rtp-udp-test-server.o
Removing examples/stream-client
Removing examples/stream-client.o
Removing examples/stream-server
Removing examples/stream-server.o
Removing examples/udp-test-client
Removing examples/udp-test-client.o
Removing examples/udp-test-server
Removing examples/udp-test-server.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/netif/Makefile
Removing include/osmocom/netif/Makefile.in
Removing install-sh
Removing libosmo-netif.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/amr.lo
Removing src/amr.o
Removing src/datagram.lo
Removing src/datagram.o
Removing src/ipa.lo
Removing src/ipa.o
Removing src/ipa_unit.lo
Removing src/ipa_unit.o
Removing src/jibuf.lo
Removing src/jibuf.o
Removing src/libosmonetif.la
Removing src/osmux.lo
Removing src/osmux.o
Removing src/osmux_input.lo
Removing src/osmux_input.o
Removing src/osmux_output.lo
Removing src/osmux_output.o
Removing src/prim.lo
Removing src/prim.o
Removing src/rs232.lo
Removing src/rs232.o
Removing src/rtp.lo
Removing src/rtp.o
Removing src/sctp.lo
Removing src/sctp.o
Removing src/stream.lo
Removing src/stream.o
Removing src/stream_cli.lo
Removing src/stream_cli.o
Removing src/stream_srv.lo
Removing src/stream_srv.o
Removing stamp-h1
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/amr/.deps/
Removing tests/atconfig
Removing tests/jibuf/.deps/
Removing tests/osmo-pcap-test/.deps/
Removing tests/osmux/.deps/
Removing tests/stream/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/osmo-amr-inspect
Removing utils/osmo-amr-inspect.o
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins2512472497087136762.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-bts/BTS_MODEL/sysmo/FIRMWARE_VERSION/master/WITH_MANUALS/1/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-bts/BTS_MODEL/sysmo/FIRMWARE_VERSION/master/WITH_MANUALS/1/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 2210853 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
